Thinking of changing the cement board for the tile floor? It is a simple DIY tile underlayment that provides a stable, consistent tile-setting platform. It’s normal to be confused between the common two sizes.
So, confused to use 1/4 or 1/2 cement board for tile floor?
You are watching: 1/4 or 1/2 Cement Board for Tile Floor? Detailed Discussion
On all floor tile projects, the requirement is to utilize a 1/2 inch thick cement board. If you’re installing a wood surround first, you might be able to correct the thickness difference. A 1/4 inch cement board, on the other hand, is perfect for both floor and countertop applications.
Let’s jump into the detailed discussion
1/2 vs 1/4 Cement Board
When securing horizontally every 16 inches, one of the most critical aspects of your backer board is the capacity to resist any flexing. As the board warps, twists, or breaks, a flexible or flimsy underlayment will crack the tiles. You will have to caulk or grout your tiles first.
If a 1/4 cement board panel is secured at 16-inch intervals, it will probably fracture. Also if someone slams their entire weight onto the studs, it can result in tile and grout cracking.
Advocates recommend using 1/2 inch thick cement boards with normal 16-inch spacing framing for wall building. This means that any board thinner than this is unsuitable for use as a tile underlayment. Instead, 1/4inch cement boards should be used in installing tile floors and countertops.
Although some earlier recommendations say that 1/4 inch cement board is suitable for shower walls, this is not always the case. 1/4 inch cement boards will hold the mortar and be mold and moisture resistant, the tile you lay over them will only last if it is gently leaned on.
The tile could break if any accident occurs. It needs the shower walls to support or resist severe impact.
With that in mind, it’s recommended to use something thicker at least 1/2 inch thick when tiling walls. The 1/4 inch cement boards should be saved for floor and countertop construction.
Cement Board Sizing
Cement board is most commonly found in three-foot-by-five-foot sheets. Although larger sheets, 4 by 8 feet, are available, they are significantly heavier, making them difficult to handle for DIYers.
If you’re placing tiles, consider the vast majority of tubs of 5 feet long and less than 3 feet wide.
Read more : How to Vent a Range Hood on an Interior Wall (5 Easy Steps)
The tile should be put from the top of the tub to at least three inches above the showerhead. To protect your walls from moisture, the tile should extend a few inches past the tub on both sides.
Thickness Variety
You can find cement boards available in two thicknesses. One is 1/4 inch and the other one is 1/2 inch. However, some planks may be as thick as 5/8 inch. A 1/4 inch thick 3 by 5 panel weighs about 30 pounds, while a 1/2 inch panel weighs between 36 and 44 pounds.
During wall tile installations, 1/2 inch cement boards should be utilized, according to industry standards. But, for floor and countertop applications, 1/4 inch cement board is best to consider.
Cement board panels with thicknesses of 1/4 inch, 1/2 inch, and 5/8 inch are all suitable for countertop installations.
You should choose a cement board thickness based keeping the below application in mind. Also if you want, you can choose kerdi board over cement board as well.
Floors
The cement board for ceramic tile flooring is normally supported by a plywood subfloor. If you’re replacing ceramic tile on an existing floor, the cement board can normally be laid right over it as long as the floor is in good condition and the extra thickness isn’t a problem.
A minimum thickness of 1/4 inch is necessary for cement boards, however, thicker panels may be used. Ceramic tile can be put directly over concrete without the requirement for the backer board. It’s possible as long as the surface is flat, smooth, and free of large fissures.
Walls
A cement board is often put directly over the wall studs. In particularly wet places, such as showers and bathtub surrounds, the stud is covered with an intervening moisture membrane.
If the seams are waterproofed, some cement board materials don’t require the underlying membrane. Do not put cement board directly over drywall in a moist area. First, remove the current surface material. And then put the cement board over the studs and membrane. You can use the same guidelines if you’re interested in installing a countertop.
For walls, 1/2 inch or 5/8 inch thick cement board is recommended. This extra thickness is needed to bridge the studs and provide a solid foundation for the tile. However, there are certain exceptions.
Manageability
A 1/4 inch board is lighter, easier to attach to the substrate with screws or nails, and easier to cut. Cutting and managing a 1/2 inch board on the construction site can be a real pain. The difference in manageability between cement boards is something that DIY should consider.
You can use a jigsaw to cut and size your cement boards according to your need. This is why a cement board is easy to use. Keep in mind to get a good quality jigsaw. Here are some best jigsaws that are affordable in the market.
Read more : 65 Ingenious Kitchen Organization Tips And Storage Ideas
[amazon table=”6934″]
You can use these sharp jigsaws to cut your cement board into a perfect size without any hassle.
Installing Cement Board on Walls and Countertops
Countertop cement board installation is identical to floor cement board installation. However, countertops typically require an additional strip of cement board along the edge of the countertop. This generates a built-up edge that can be used to secure bull-nose or other types of edge tile.
The same processes are used to install cement boards on walls, but there is no layer of mortar behind the cement board because it is screwed directly into the wall studs.
If you want to use a moisture barrier between the board and the wall studs, consult a cement board manufacturer. Thick plastic sheeting or any kind of water-resistant barrier could be useful in this case. This will protect your countertops if your pedestal sink has installation problems.
That’s all we have in our detailed discussion.
FAQ’s
What size backer board do you use for floor tile?
Most tiling projects require half-inch cement backer boards. The backer board must be put over 5/8-inch thick base plywood for flooring. You can also use 3/4-inch plywood beneath the backer board.
Should I use a half-inch or quarter-inch backer board?
A minimum thickness of 1/4 inch is required, however, thicker panels are also acceptable. Use 1/2-inch or 5/8-inch cement board on the walls instead of 1/4-inch. When crossing the studs, extra thickness is required, and it also provides a sturdy foundation for the tile.
Can you put a cement board on the concrete floor?
Cement boards are a great way to construct a stable and smooth subfloor over a concrete subfloor. For wood flooring, the thin-set mortar could be useful to attach the cement boards directly to the concrete.
Conclusion
We hope our discussion will help you to choose between 1/4 or 1/2 cement board for the tile floor. After finishing the renewal, your floor tiles will bring more attraction to the room.
If you want to use a moisture barrier between the board and the wall studs, talk to the cement board manufacturer.
Until next time, see you!
Source: https://gardencourte.com
Categories: Kitchens