If you have countertops that just aren’t your style, but you don’t have the budget to replace them, you can paint them! I know… It sounds a bit weird. But I painted our old, brown granite countertops nearly two years ago and have zero regrets. But there are some things I wish I had known before we tackled this project. So I’m sharing everything you need to know about countertop paint with you in this post!
It’s no secret that I wasn’t a fan of our kitchen when we moved into this house a couple of years ago. We tackled a very budget-friendly kitchen makeover that included painting our kitchen cabinets and painting our tile backsplash. And it looked 1000% more like our style when we finished!
You are watching: How to Paint Countertops & What You NEED to Know First
But the brown, speckled granite countertops remained and they were dragging down the whole look of our kitchen. We didn’t like the color or the pattern. But replacing the countertops was not even remotely in our budget. So I started looking for affordable DIY countertop options. And I quickly decided I wanted to use countertop paint to mimic the look of marble countertops.
We successfully used a countertop paint kit to get the EXACT look we wanted. I love how our kitchen counters turned out so much that I have since used the same method to paint the countertops in both of our daughter’s bathrooms and our colorful, modern laundry room.
Now that we have lived with the painted kitchen countertops for nearly 2 years, I am ready to share my unbiased review, tips & tricks as well as the full tutorial for how to do it yourself.
Is Painting Countertops a Good Idea?
Yes! If replacing countertops you don’t like is out of your budget, I think painting your countertops is absolutely the way to go. I used a peel-and-stick countertop wrap on a countertop in our built-in-office nook and it was much harder to work with than paint. Plus, it didn’t look nearly as realistic as our painted kitchen countertops.
Benefits of Painting Countertops
First, let’s cover the benefits of painting your countertops. The biggest pro is that it’s an incredibly cost-effective way to give an entirely new look to your counters. You do need to purchase quality primer, paint, and sealer, but you can do so for around $200.
There are several different countertop paint kits available that are surface-specific and already include all the supplies you need. The cost of painting your countertops is a tiny fraction of the thousands of dollars it would cost to replace them.
Painting countertops is also a really doable DIY project even for beginners. My daughters who were only 10-years-old at the time helped paint the veining on our counters. I promise, it’s not hard and it’s kind of fun.
Finally, if you use a high-quality countertop paint kit, your countertops will hold up beautifully!
Cons of Painting Countertops
In my experience, there are only 2 downsides of using countertop paint to transform your counters. The first is that it is time-consuming and you will have a period of time when you cannot use your kitchen. Again, it isn’t hard, but it will take a fair amount of time. The second downside is that you will not be able to put hot pots or pans directly on your painted counters. The latter wasn’t a big concern for us since we didn’t do that anyway, but I can see that many people would consider that a drawback.
This post contains affiliate links for your convenience. Click here for my full disclosure policy.
What Kind of Paint Do You Use On Countertops?
I highly recommend purchasing a kit that is specifically formulated for painting countertops. Based on my research and after reading hundreds of reviews, we decided to use a Giani countertop paint kit. My conclusion was that the Giani countertop paint kits were the best combination of durability, price and ease of use. There are lots of different styles and colors available.
In addition to my online research, I also chatted with people who have actually painted their cabinets. I learned 2 things… The people that used the Rustoleum Countertop Paint kit did NOT recommend it. They wound up with peeling and chipping countertops. But every single person I heard from that had used the Giani countertop kit loved their results and hadn’t had any issues.
Can you Paint Laminate Countertops? What Kinds of Countertops Can Be Painted?
The Giani countertop paint kit I used allows you to paint nearly every kind of material. We painted our granite counters, but you can also use the kit to paint Formica, laminate, Corian, ceramic tile, butcher block, and cultured marble. Just note that different countertop surfaces require different prep as specified in the manufacturer’s instructions.
How to Paint Countertops to Look Like Marble: A Tutorial
Now I’m going to share exactly how to paint countertops using the same countertop paint kit that we used. I’m also going to answer allllllllll the questions that have come in since we finished this project. So this post may be long, but it will be worth your while to read the whole thing if you are considering tackling this project yourself.
Do yourself a favor and grab the FREE “How to Paint Countertops” printable instructions for this project by filling out the form below 🙂
Thank you to DAP Products for sponsoring this post. As always, all opinions are 100% my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy.
Materials Needed
- Lacquer thinner (if you are painting granite countertops)
- This countertop paint kit
- This kit comes with EVERYTHING you need, including the brushes, rollers, plastic sheeting to protect your cabinets, etc.
- Giani says that each kit covers 35 square feet of countertop. We have just under 100 square feet of countertop and had PLENTY of paint with a single kit. And we almost had enough of the epoxy topcoat with one kit. We did have to use 1 set of the epoxy topcoat from a second kit. If I had it to do over again, I would have ordered 1 full kit and 1 extra set of the epoxy topcoat (that can be ordered separately).
- Brown paper flooring protection (this isn’t included in the kit, but I highly recommend it to protect your floors)
- Tweezers
- Polycrylic topcoat in satin finish (this is OPTIONAL and only if you want to achieve honed look)
- Caulk removal tool
- Paper towels
- DAP Kwik Seal Ultra
- DAP Alex Plus caulk
Steps
Read more : The Honest Kitchen Dog Food Reviews & Personal Experience
You can watch the short video below for an overview of this process before reading the step-by-step instructions 🙂
Phase 1: Prepping and Cleaning
Step 1: Remove any silicone caulking and clean up any caulking residue with rubbing alcohol.
Step 2: Clean and prep your surface. Every type of surface should be cleaned with a scouring pad to remove any grease and dirt. Different surfaces require different prep after this-see the chart below from Giani.
If you are painting granite counters like we did, you also need to clean your counters with Laquer Thinner and then wipe them down with rubbing alcohol. Don’t worry-it’s quick and easy.
Step 3: If you have any deep gouges, seams or other imperfections in your counters, fill them with wood filler and sand the filled areas once they are dry. Clean the dust off with a damp cloth.
Step 4: Tape off any obstacles and borders that you do not want to get paint on, such as your stovetop, the edge of your cabinets, etc.
Phase 2: Painting and Veining
Step 5: Now it’s time to start painting! After shaking and stirring the primer can well, use the foam brush that’s included to cut in around the edges of your countertops (and any backsplash that is made of the same material). Then use your roller to apply the primer to the larger, flat surfaces. You want to use a THIN coat. Work as quickly as you can so the painted sections blend as well as possible. Wait 4 hours for your primer to dry before applying a second THIN coat. Our granite countertops were so dark that I wound up applying a third coat. Even with 3 coats and nearly 100 SF of counters, we had plenty of the white primer in a single can (and quite a bit leftover). Make sure to let your final coat dry for 4 hours.
Step 6: Look up photos of marble patterns that you like and practice your veining on the practice board that’s included in the kit. I knew I didn’t want much veining at all, so I found a photo of a marble slab without a ton of veining and looked at it while our primer was drying.
Step 7: Once your primer is fully dry, you can start painting your veins. If there is one thing I cannot stress enough it’s that PAINTING THE VEINS IS SUPER, SUPER EASY. Do not let it intimidate you! I even let my 10-year-old girls paint some of the veins. Seriously, it’s nearly impossible to mess up and if you do, you can just mist it with more water and easily wipe it off and try again. You use the gray mineral paint that is included to paint your veins.
Begin by gently holding the end of the included artist’s brush to drag the grey veining paint across your countertop. You want to create THIN veins to keep it as realistic as possible. This is what Giani says to do and it worked for me! “For the most organic shape, we recommend dragging your brush and moving it loosely to create more natural waves and flows. Tip: You can slightly wiggle or twist your brush as you drag it along the surface. Work in small, about 1 foot, sections as you build your veins. For longer veins, split up the length that you want to cover into 1-foot sections rather than connecting it all the way across at once. Also, you’ll paint on your major veins over the entire countertop prior to painting the edges or backsplash. However, you can paint those areas as you move along if you wish. Be sure to attach those veins at angles rather than straight up and down; like a real slab of marble!”
After you use the gray mineral paint to create a vein, mist it with water using the included bottle. You want to apply enough water so that the paint starts to bleed. Then use your larger bristle brush that’s included to dab the entire length of the vein. This is what makes it look super real! You can wipe off excess water with a paper towel, but be careful not to accidentally wipe your veining off.
Giani suggests sanding with 600 grit sandpaper after you complete your veining, but I didn’t notice that instruction so we didn’t do it and everything turned out fine.
Phase 3: Applying the Top Coat
Step 8: Use painter’s tape to tape plastic sheeting to the underside of your countertops and allow the sheeting to drape all the way to the floor to protect your cabinets. We also used brown paper flooring protection to cover our wood floors. You will also want to protect your sink with plastic sheeting if it’s an undermount style like ours.
Step 9: Now it’s time to mix your epoxy. Each kit comes with THREE sets of resin and activator cans-BE SURE TO MIX THEM ONE AT A TIME AND ONLY AS YOU NEED THEM BECAUSE AFTER MIXING THE EPOXY, YOU HAVE ABOUT 30 MINUTES TO COMPLETELY COAT THE SECTION before it stops flowing adequately.
Pour 1 entire can of Epoxy Activator into one Ultra Epoxy Resin can. Stir the mixture for EXACTLY 3 minutes and 15 seconds. Seriously… set a timer. Giani says if you don’t mix it for the proper amount of time, you may have “performance issues.” No one wants those.
Step 10: Work in 6-foot sections. Pour about 2/3 of the topcoat in streams onto the section you are working on. Use the angled brush included to coat your backsplash (if it matches your countertop) and to cut in along the perimeter of the section you are working on. Then use your roller to spread the rest of the epoxy over the section you are working on. THIS IS IMPORTANT-the topcoat self-levels so don’t overwork it. All you need to do is make sure that the entire surface is coated and there aren’t any bare spots. If you need more, pour more on your countertop. If you have excess, either spread it toward the next section or brush it back into your can.
After you’ve coated most of your 6-foot area, pour a small stream of epoxy close to the edge of your countertops. Then use your roller to spread the topcoat on the edge of your counters. The epoxy WILL run onto the plastic sheeting you’ve hung. Don’t freak out and don’t let it make you hesitant to put plenty of the topcoat on the edges. You want them well-coated since edges tend to get banged and bumped a lot. The topcoat will continue to drip off the front edges of your counters for about 30 minutes to an hour while the epoxy self-levels. Totally normal-again, don’t freak out.
If you have a section longer than 6 feet (like we did), mix your next batch of topcoat right after finishing your first batch and start applying it to your next section ASAP. You want the epoxy topcoats to flow together where your two sections meet.
Read more : How Much Does It Cost to Install a Kitchen Sink
Continue applying the topcoat in 6-foot sections until all of your countertops are covered.
Step 11: As soon as possible after you finish, use a bright light to look for bare spots. If you find any, fill it in ASAP. You also want to look for lint, air bubbles, pet hair, etc. in the topcoat. If you find any, use tweezers to pull it out (or pop air bubbles). Don’t worry about disrupting the topcoat-the area will continue to self-level and will fill back in. You have about an hour to remove any debris or fill in bare spots before the epoxy starts to harden. Do NOT remove anything from the epoxy after one hour or the epoxy will not fill it back in.
Even though we kept our dog outside while we applied the topcoat, we had to tweeze dog hair out of the epoxy. And there was other lint, too. It’s shocking what’s just floating through the air in your home on a regular basis. And we didn’t get them all, lol. We have 2 dog hairs permanently cemented in our topcoat, but they aren’t super noticeable.
That said, if we hadn’t left our house pretty much immediately after completing this step, I’m certain we would have had a lot more lint and dog hair stuck in our counters, so be sure to read my suggestion in step 13 about how to minimize this!
Step 12: THIS IS IMPORTANT-you need to remove your painter’s tape between 1 to 2 hours after you have finished applying the epoxy topcoat. If you do it too early, the epoxy may run where you don’t want it to. If you wait too long, the tape could become cemented in the epoxy. We left some of our tape on a bit too long and though we were able to get the tape off, it took some of the white paint off with it. Ooops. Fear not, I was able to fix it with caulk (more on that later).
Phase 4: Curing
Step 13: Now you wait! You need to let your countertops cure. They will be “tack-free” in about 8 hours, but that doesn’t mean you can use them. You need to wait a full 24 hours before using your dishwasher and a full 2 days before using the counters. Wait the full cure-time of 7 days before placing anything heavy like a mixer or blender on your counters.
This is the hardest part! I highly recommend planning this project around a time when you can get out of your house for at least 24 hours while your counters cure. We left our house immediately after Step 12. We took our kids and our dog and got the heck out of town for 2 nights and it worked out perfectly. We weren’t inconvenienced by having to stay out of our kitchen AND our counter wasn’t full of Bernese Mountain Dog hair, lol.
Phase 5: The Finishing Details
Step 14 OPTIONAL: The Giani epoxy resin topcoat is VERY SHINY. And while the countertops were beautiful as they were, I really wanted the look of honed marble. So after the full 7-day cure time passed, I applied 2 coats of this Polycrylic topcoat to knock off the high shine. I used a bristle brush to apply it because in my experience, rolling it on causes air bubbles. I used a satin finish so there is a slight sheen, just like you would see on a honed marble countertop. I can see some brush strokes when the light hits them a certain way, but that doesn’t bother me. For us, having some barely visible brush strokes is definitely worth the trade-off of getting the honed look.
Step 15: After the full 7-day cure time has passed, you ABSOLUTELY need to caulk to give your countertops a fully finished look. If you have followed me for a while, you know that I only use DAP caulk because it’s the best-plain and simple. I recommend caulking along any built-in appliances/fixtures (such as our stovetop and sink faucet) and along the edges of cabinets and your backsplash.
I cannot tell you what a tremendous difference this will make in how your countertops look! Just take a look at how unfinished the edges along our stovetop and cabinets looked before I caulked. If you are new to caulking check out this post on How to Caulk: A Step-by-Step Guide for Beginners.
And look at how polished and perfect they look AFTER caulking. It’s worth the extra effort, I promise.
I used Alex Plus caulk everywhere except where the countertop meets our undermount sink. For that gap, I used DAP Kwik Seal Ultra. We first removed the old caulk from the gap between the wink and the countertop. My favorite thing about the DAP Kwik Seal Ultra is that it goes on white and dries clear, so you can easily see it as you apply it. Wait the recommended amount of drying time before exposing the joint to moisture. DAP Kwik Seal Ultra is water ready in only 4 hours. It also repels dirt and soap scum, resists stains and has a lifetime mold and mildew resistance guarantee.
Frequently Asked Questions About Countertop Paint
PHEW, this was a LONG post but I like a lot of detail and info before I tackle a project, so I hope this has been helpful for you!
Photos of the Finished Countertops
That was a lot of reading, so give your brain a break and just enjoy these photos of the finished countertops!
You may also enjoy these posts:
- How to Paint Kitchen Cabinets Without Sanding or Priming!
- How to Paint Your Tile Backsplash in 5 Simple Steps
- The Trick to Painting Ikea Furniture (and how NOT to do it)
- Gorgeous But Cheap Flooring Ideas
- The Easy Way to Update Bathroom Tile Without Replacing It!
Wondering how I approach transforming rooms and spaces in our home? Check out Designer in a Binder®.
And if you want exclusive content and behind-the-scenes sneak peeks, be sure to subscribe before you head out!
Wondering how I approach transforming rooms and spaces in our home? Check out Designer in a Binder®.
And if you want exclusive content and behind-the-scenes sneak peeks, be sure to subscribe before you head out!
Source: https://gardencourte.com
Categories: Kitchens