Looking for ways to refinish wood cabinets? If you want an easy way to give your kitchen or bathroom a new look, refinishing existing cabinet doors may be just what you’re looking for! Wait until you see how my hood vent turned out using General Finishes Gel Stain.
You don’t have to be an expert to refinish your own kitchen cabinets. In fact, there are many ways to do it right.
You are watching: How to Refinish Wood Cabinets with Gel Stain
Read on to learn more about the process!
(Posts on stacyling.com may contain affiliate links. Click HERE for full disclosure.)
Staining Wood Cabinets
Have you ever stained wood before?
It sounds like a daunting process but it’s so easy to do, and even simpler using General Finishes Gel Stain.
This type of wood stain applies a deep, rich color that an oil-based stain does not achieve.
When we renovated the kitchen a few years ago, I struggled with how to refinish the vent hood.
It was such a beautiful piece but it looked so bland in my farmhouse kitchen.
I planned to paint the hood vent with a soft white chalk paint like the wood cabinets, but wanted it to stand out from the rest of the cabinetry.
So I ultimately decided to stain it.
There are so many different types of cabinet finishes available today. Which one you choose is personal to the look you want to achieve.
Since I wanted the hood vent to be the focal point, I decided to go with General Finishes Gel Stain in Antique Walnut. (More on this later).
Wait until you see how good it looks now!
Before Using General Finishes Gel Stain on the Hood
I poured over Pinterest and Google for months to come up with an overall design.
Since I chalk painted the cabinets white, I thought it would be overkill to paint the hood vent white too.
So I chose to stain the hood to bring out the pretty details and become a statement piece in the kitchen.
The former homeowner built this hood from scratch and did an amazing job, didn’t he?
It was pretty but bland and lacked a venting system.
So the hood vent was for decoration only.
The former homeowner installed these cabinets and built the hood himself about thirty years ago.
While the craftsmanship is incredible, the detail is almost unnoticeable and the hood vent gets lost in the kitchen.
For this kitchen remodel, we wanted to make the hood operational so we purchased a vent insert that could be installed after refinishing it.
Read more : How to Clean the Top of Kitchen Cupboards [4 Simple Steps]
After researching different types of stains, I started seriously considering gel stain.
I poured over Pinterest to learn how to apply gel stain.
While most articles worked with General Finishes Gel Stain in Java, I chose to go a shade warmer and lighter with General Finishes Gel Stain in Walnut.
Take a look at this close-up of the hood. The beadboard detail is barely noticeable.
I always knew the hood had this detail but didn’t appreciate it as much as I do after applying gel stain.
Preparing to Gel Stain the Hood
Whenever I work with a new product, I practice on a few pieces before going “all in” to build up my confidence and see how I like it.
Since I finished painting the cabinets white and was in total “go mode,” I went for it.
I read the directions on the can, several articles on Pinterest and visited General Finishes’ website to view their tutorial here.
I must have watched that video 10 times to ensure I knew what I was doing before gel staining cabinets.
When I was ready to get started, I remember heading to the basement with the repeated mantra “if it doesn’t look right, you can always paint it; if it doesn’t look right, you can always paint it.”
And I have to admit, I was pretty nervous to start but when I’m ready to go…I’m ready to go.
So here is how I did it…
How to Refinish Wood Cabinets with Gel Stain
Refinishing wood cabinets with gel stain is a pretty quick process.
What takes the most time is the drying time because you need to allow 24 hours between coats for drying.
Be sure to work in a well ventilated area too.
Wait until you see how easy it is to stain wood cabinets!
What You Need to Gel Stain Kitchen Cabinets
If you’re looking to add a little bit of style to your home, then gel staining kitchen cabinets might just be the perfect solution.
With a few simple tools and materials, you can transform old cabinets into something truly amazing.
Here’s what you need to gel stain kitchen cabinets.
- Cleaner/De-greaser
- 1 Quart of General Finishes Gel Stain
- 5 Foam Brushes
- 2 Rolls of Shop Towels
- 1 Quart of General Finishes Top Coat
- Sandpaper (various grades)
- Mineral Spirits
- Bucket or garbage bag to toss stained towels
- Staining brush
- Several paint mixing sticks
- Plastic gloves to keep the product off of your hands
How to Gel Stain Cabinets
- If you are refinishing cabinets, remove all the doors and hardware, label each, and diagram where they go.
- Clean and de-grease surface well. Wash and rinse well after degreasing to avoid leaving residue behind.
- Work in a well-ventilated area. Use gloves to avoid getting stain on your hands. Open the gel stain can and stir well. The gel stain is very gloppy but will smooth out after stirring.
- If the surface is unfinished, prep sand with 120 and 150-grade sandpaper to rough up your surface. If the surface is finished, use slightly stronger grade sandpaper to rough up the finish.
- Work in sections and do not stop while are working. The staining process is pretty quick, but don’t stop until done to avoid overlap marks and have a nice even finish.
- Apply a slip coat of mineral spirits because it helps the stain glide on, spread evenly, and reduces lap marks.
- Saturate the foam brush then get it on the surface quickly. Completely spread it out, then wipe it off. You will literally glop the gel stain onto several areas of the surface.
- Spread the stain out to a nice even coat with a shop towel.
- Remove the excess stain. Toss stained towels in the bucket. Be sure to wipe all of your edges so you don’t accidentally leave glops of a stain behind.
- As you get the stain off the surface, start wiping with the grain of the wood. Check your surface to see if you missed anything.
- Let it dry overnight before applying a second coat. I did two coats of gel stain using the same process.
- Allow drying for 24 hours before top coating.
While the stain looks gorgeous after gel staining, it almost seems like you can skip top coating but don’t do that!
It is so important to apply a top coat after the stain dries.
General Finishes sums it up pretty well, so consider this: gel stain is the color and the top coat is the protection of that color.
Therefore, don’t skip top coating!
How to Apply the Top Coat
Since the hood is in the kitchen directly over the stove where I boil a lot of water, I used a high-performance based finish so it would hold up better.
Read more : What Is a Utility Knife Used for? And Does It Deserve the Name?
I chose a flat finish because I prefer the look of a matte finish.
Here is the process:
- Open the can and stir well until the gel topcoat smooths out. Wear gloves to keep the product off of your hands.
- Follow almost the same application process as the stain except apply a thinner coat for the first application of topcoat. Use the foam brush to apply and even out as you are working.
- Wipe off the sides of your wood surface. Use a staining brush to lightly brush out the finish in the direction of the grain. Do not apply pressure – just let the brush lightly drag on the surface.
- Allow drying overnight.
- Sand down the surface with a 220 sanding pad in the direction of the wood grain. Wipe off dust with a shop towel.
- Apply the second coat with the same technique as the first.
- Soak a little bit of a shop towel in the gel top coat to use as a polishing pad, then lightly wipe and polish the surface. Take off just a little bit of the finish, moving in the direction of the grain. Then do one last pass with a clean cloth, almost feathering the finish.
- Allow drying overnight before applying the third coat. Follow the same process as the second coat. Then allow drying for 72 hours before use.
Note: Although I used a flat finish there still is a natural sheen to the piece. It looks gorgeous in person and I would choose to use the flat finish again.
After allowing the hood to dry for 72 hours, a licensed electrician installed and hooked up the new venting system for us.
Doesn’t it look amazing?
The finish on the hood is beautiful and has held up very well over the last few years.
I’ve worked with several brands and types of stains before, but the gel stain provides a very rich-looking finish that you do not get from an oil-based stain.
When looking at the before and after pics of the hood, the wainscotting detail stands out so much more after finishing it with this product and it now looks like a very expensive custom piece.
I know the process sounds daunting, but each application is very quick and easy.
The thing that took the most time is the 24 hour drying time between coats.
But it is well worth the wait.
This hood is my favorite piece and I am very proud of it.
Now that’s it’s all done, I love my kitchen!
It was really fun to decorate for spring.
And I recently decorated it for fall.
I’m thinking about what to do for the holidays. This is what I did last year.
If you are thinking about trying to gel stain kitchen cabinets, I highly recommend it!
And if you are considering chalk painting cabinets, check out my FAQ with lots of answers here.
More Cool DIYs You May Enjoy
- How to Paint Wood Cabinets with Chalk Paint
- How to Paint Upholstery Fabric with Chalk Paint
- Painting the Piano
- Upcycled Vintage Framed Chalkboard
Pin and Share It on Pinterest!
If you like this post, please share and pin it on Pinterest. (If you hover over the image, the Pinterest button will be in the upper left corner.)
I’ve created the below-custom pin for this post.
Subscribe to the blog and gain access to information not available to the general public.
Thanks for stopping by the blog today!
Enjoy your day! xoxo
Let’s Connect!
If you like this post, please follow me @bricksnblooms on Pinterest, Facebook, Instagram, and TikTok. Subscribe to my YouTube Channel. Or join my Facebook Group.
Source: https://gardencourte.com
Categories: Kitchens