Concrete Staining: Types, Procedure, and Advantages

🕑 Reading time: 1 minute

Concrete staining is a quick and inexpensive technique used to enhance the aesthetic appearance of the concrete surface. It is a type of flooring that involves pouring a water-based solution onto a washed concrete surface, which later becomes a permanent part of the concrete surface.

You are watching: Concrete Staining: Types, Procedure, and Advantages

Stains can fade and wear off over time, so sealers are used to protect them. The highly absorbent property of concrete allows it to stain in almost any color imaginable. Concrete can be stained in a variety of hues and tones using different solutions and techniques.

Types of Concrete Staining

The concrete stains are divided into two groups:

1. Reactive Concrete Staining

Reactive stains are acidic solutions typically made of inorganic metallic salt and hydrochloric acid, which react with the mineral in the concrete. The stain develops a permanent bond with the concrete during the chemical reaction and produces a marble-like appearance by physically etching the surface.

Reactive stains or acid-based stains offer fewer color options and require more safety precautions and experience to apply when compared to non-reactive or water-based stains.

2. Non-Reactive Concrete Staining

Read more : How to paint a concrete porch or patio

Non-reactive stains are water-based stains made up of acrylic polymers and pigments and do not rely on a chemical reaction to impart color. Non-reactive stains are designed to penetrate deeper into the concrete surface and deposit their pigment particles in the open pores.

Exposure to traffic, chemicals, and weather will cause the stains to fade, peel or flake, so a layer of sealant is used to protect the stain.

Recent advancements like polymer-bonded technology in water-based stains minimize the possibility of it fading, peeling, or flaking and at the same time being friendly to volatile organic compounds.

Water-based stains are more popular since they come in a wide range of tints and tones, from extremely light translucent colors to vivid, bold solid colors.

Non-reactive stains can be mixed to create new colors without any adverse effects and are more consistent as they do not involve reactions in the concrete. In addition, non-reactive stains are free of solvents and acids and are easier to apply.

Reactive and non-reactive concrete stainings are excellent for revitalizing dull interior and exterior surfaces of walkways, patios, garage flooring, indoor flooring, countertops, walls around fireplaces.

Concrete Staining Procedure

Read more : How to Clean a Composite or Wood Deck

The concrete staining process is moderately difficult, affordable, and may take up to two days. The following are the steps involved in concrete straining:

Preparation of Concrete Surface

1. Irrespective of the age of the concrete, it is important to prepare the concrete surface carefully.
2. The concrete surface is cleaned thoroughly for dirt, residues, and any grime by using mechanical grinding or concrete cleaning solutions and degreasers.
3. Any existing coating/staining on the concrete surface shall be removed before staining.
4. If any concrete cracks are found, they shall be sealed with concrete crack sealants.
5. Uneven patches are buffed using a floor scrubber.

Application of Stain

1. Cover the area using tape where staining is not required.
2. The stain is carefully diluted with water to get the desired color.
3. Airless sprayers or brushes are used to coat the surface.
4. The newly applied stain is allowed to dry for up to 10 hours, depending on the temperature, humidity, and airflow.
5. The above procedure is repeated to achieve a more intense color.

Removal of Residue

1. The residue is removed by rinsing the concrete with clean water until the water runs clear.
2. T.S.P, baking soda, or ammonia are used to neutralize the acid stain.
3. Any stubborn residue is removed using a brush before the final rinsing.

Application of Sealer

1. Concrete sealers are used to protect the finish of the stained concrete from fade, wear and tear.
2. After the application of sealants, the concrete shall be allowed to cure for one day.
3. It is recommended to apply two coats of sealer for optimum durability.

Advantages of Concrete Staining

The advantages of concrete staining are:

1. Concrete stain is available in a wide range of colors, including neutrals, pastels, and rich tones.
2. It enhances the aesthetic appearance of old and new concrete surfaces.
3. It requires no or low maintenance.
4. Concrete staining is a cost-effective flooring option, particularly for large spaces.
5. Stain can also be used in combination with other surface finishes.

Disadvantages of Concrete Staining

The disadvantages of concrete staining are:

1. Staining does not increase the durability or strength of the concrete.
2. Cracks and discolored areas are not covered by staining.
3. The final color of concrete staining is unpredictable.

FAQs

Read More

How to Lay Brick On-Edge Flooring?

Natural Stone Flooring: Properties, Benefits & Drawbacks

Epoxy Flooring: Types, Process of Installation, and Advantages

Source: https://gardencourte.com
Categories: Outdoor