Here’s your guide to painting raw, unfinished, oak cabinets from Lowe’s, The Home Depot, or any other hardware store.
A couple of months ago, we updated the laundry room, one of our most significant makeovers to date. It was one of those projects which had a few other sub-projects in itself. And although it was overwhelming, it was so worth it!
You are watching: How to Paint Unfinished Cabinets
One of those sub-projects was painting three unfinished oak cabinets we purchased at our local Lowe’s. My original thought was to paint the existing cabinets; however, we realized we could not salvage them when we took them off the walls.
So, follow this tutorial to paint cabinets if and only if you are purchasing raw and unfinished wood cabinets such as these oak cabinets I bought. If you are painting pre-finished kitchen cabinets, I highly recommend this tutorial from my friend Tasha at Kaleidoscope Living.
This post contains affiliate links for your convenience. For more information, please read my Affiliates Disclosure.
If necessary, I recommend purchasing all the cabinets and end cabinet pieces from the same supplier. Therefore, I am linking to the unfinished cabinets I bought from Lowes, but you can also look for their equivalents at The Home Depot or any other hardware store.
Steps to Paint Unfinished Cabinets
A little disclaimer before explaining the painting process. Because the left end of our cabinet shows, I had to attach an end cabinet panel to that side. After I glued it, I started painting.
1. Gather Your Supplies
In an open space, place the drop cloth on the floor and gather all of your supplies. These particular unfinished cabinets we purchased do not need any prep or sanding before painting.
2. Remove the Doors
- With a screwdriver, remove the doors from the cabinets and lay them flat on the dropcloth.
3. Paint the Doors
- Pour some paint in the paint tray, and start painting the doors of your unfinished cabinets.
First, I prefer using the paint roller to cover most of the surface, and then I use the paintbrush for details.
- After rolling the paint on most of the surface of the door, use the angled brush to complete all the crevices where the paint roller can’t reach.
Read more : An All Natural Way To Get Rid of A Smelly Sponge
There’s no right or wrong way to paint these cabinets. It is straightforward. The cabinet paint runs smoothly over the unfinished surface. Feel free to switch between rolling and brushing until all the surfaces are entirely covered.
Once painted, move the first door aside and paint another piece.
Allow the paint to dry completely (it took about 2 hours inside my air-conditioned home) before turning the doors over to paint the other side.
4. Paint The Unfinished Cabinet
It is not necessary to paint the inside of the unfinished cabinets from Lowes because they have a melamine finish. The only areas you should paint are the cabinet’s outer oak frame (or lip) and the end panel if you need one.
Use painter’s tape to delineate the border and protect the inside of the cabinet. Use the paintbrush for this step.
Check out my laundry room cabinets organization for a detailed view of the inside. You can see the end panel in the picture below.
5. Optional: Paint The bottom of the Cabinet
To add a shelf over our machines in the laundry room, we had to raise our cabinets almost flushed with the ceiling. And, because of that, it was necessary to paint the bottom of the cabinets.
The cabinets are finished underneath with the same melamine that’s inside. Because the paint does not stick to this finish, you have to use an adhesion promoter. I was fascinated by this product, and once I applied it, the paint gripped over the cabinet just as it did on. the unfinished areas.
Pro Tip: Spray the adhesion promoter in a well-ventilated area.
Read more : Why has my home been overrun by pantry moths and how do I get rid of them? An expert explains
Once all the cabinet pieces are dry, you can put the doors back and install the cabinets on the wall.
Optional: Add Crown Molding
As I mentioned before, we raised the cabinets almost flushed with the ceiling. However, we planned on adding crown molding (also from Lowes)for a more refined look. So, I will show you how we installed the crown molding above the cabinets in this step.
First, I painted the primed crown molding and let it dry completely.
After the piece dried, we cut to size the two pieces we needed. One short piece for the left side of the cabinet and one long piece for the front. Here is a detailed tutorial on how to cut and install crown molding.
And with that, our painted unfinished cabinets sub-project is done!
Here’s a final look.
We finished off the cabinets by adding oil-rubbed bronze knobs, also from Lowes.
For a full look at this room, check out our Laundry Room Reveal.
Happy painting,
Source: https://gardencourte.com
Categories: Kitchens
