AcuRite Weather Station Temperature Stuck? – Quick Fix Guide
Whenever the AcuRite weather station temperature stuck, we can only assume what’s wrong, based on the essential station components.
Those include the sensor’s battery and the performance of the display unit, which we’ll review in depth in a few short moments.
You are watching: AcuRite Weather Station Temperature Stuck? – Quick Fix Guide
Let’s peek into the solution first!
Whenever the AcuRite weather station shows the temperature stuck, we need to restart both the weather sensor and the display unit. Then we need to make sure that the A-B-C switch is aligned on both pieces, before performing the Factory Reset process!
Knowing what the solution involves, let’s unwrap some of the general causes of the issue:
The temperature on your AcuRite weather station appears stuck because the sensor runs out of charge or your display unit is frozen.
There are other possibilities behind the problem so let’s try to diagnose whether your sensor is working or not.
Here are the signs of no connection between the display and the sensor!
All of these are primary signs of a lost connection between the sensor and the display unit. If you can now confirm that this is the problem that you’re experiencing, then this is the guide for you.
Here we’ll solve the inaccurate readings and show you how to prevent this in the future!
In order to solve the problem we’re going to use a chronological list of solutions that will help us solve the problem, hopefully before reaching the technical solutions.
This is why it’s important not to skip anything so you can solve the issue in a matter of minutes!
Let’s jump right in!
The connection between the sensor and the main unit (display) depends on whether the switch matches on both sides.
The A-B-C switch is designed to provide support for multiple sensor installations, and when we only have 1 sensor and 1 display we need to align the switch.
On your AcuRite weather sensor, the A-B-C switch is located in the battery compartment so you would need to open the cover.
You don’t have to remove the batteries to interact with the switch and you only need to note the orientation of the switch. Which letter is selected?
There are no screws needed, you only need to push the cover of the compartment on the back of the display.
Read more : How to Stiffen Fabric Permanently
Then the A-B-C switch will be revealed, so you can check which letter is currently selected. Then make sure that your sensor’s letter matches the switch’s letter on the display!
When both switches are now aligned, the AcuRite weather display should be able to show the correct measurements. In case, however, the temperature is still stuck, keep reading!
The next and one of the most important steps is to perform a hard reset or also known as a power circulation.
This method will refresh both your sensor and display unit, which might just be enough to solve the stuck readings that you’re currently seeing.
Here’s how to reset your entire AcuRite station equipment:
When you’re ready with refreshing your entire AcuRite weather station, we can now observe the humidity and temperature to know if the issue is solved.
These two are the main factors that you can use to recognize whether the display now shows the correct measurements.
Note: If the humidity shows 1% or 99%, the problem is still there!
Assuming that you’ve attempted the previous solutions, by now it’s clear that the problem is in the sensor and the primary suspect is the batteries.
It’s enough for the batteries to get worn out and not completely dead for some of the AcuRite station features to start shutting off.
It’s important to use Lithium Batteries when it’s cold, so if you’re wondering what is the best possible choice, we strongly recommend getting Energizer Ultimate Lithium Batteries!
Those will guarantee a long and accurate reading on your AcuRite weather sensor!
Alert: Never insert used batteries in your sensor!
It’s extremely important to keep both devices in a radius because when they are too far away, the signal might start to disconnect frequently.
This ultimately leads to incorrect measurements, and it’s worth trying to close the proximity in order to elevate the signal.
Tip: Relocate the unit, which is more comfortable for you moving!
Most users go with the display, since we can easily disconnect the piece from the power outlet and connect it elsewhere (temporarily), closer to the outdoor sensor.
The maximum distance that the sensor and display should be positioned apart is 330 ft (100 m).
Read more : DIY Pull Up Bars – 9 Creative Ways to Build a Pull Up Station
We recommend positioning them even closer than that only to check whether this will work!
In case nothing else helps, you’ll need to re-synchronize both units (sensor and display) by performing a reset.
The method of synchronization requires relocating both units, so if your outdoor sensor is quite bothersome to reach, you’ll need to get out of your comfort zone.
When you’re ready to re-sync the AcuRite weather station, follow the steps:
Once both units are re-synchronized, the LED on your AcuRite sensor should blink periodically, about every 15 seconds.
In case the light stays continuously red, something with the sensor is wrong so you should check the batteries. Again…
The incorrect readings sometimes appear because we forget to inspect and maintain our sensor, especially if you have never opened the device before.
We only recommend following the steps below if your warranty has expired, since we’ll definitely void the terms!
Here’s how to clean and maintain your AcuRite sensor unit:
In case any of the temperature and humidity board wires are disconnected you can solve the problem by soldering the wires respectively.
When you’re ready, you should check whether the sensor will now send accurate readings to the display. If not, keep reading!
In case you’ve attempted everything and nothing managed to help, it’s time to seek some professional help.
You can always reach out to AcuRite Customer Support to report the problem you’re experiencing and receive professional help.
Tip: Check whether your warranty is intact so you can claim a replacement!
Now that we know why the AcuRite weather station temperature stuck, we’ve learned that the solution requires the resynchronization of both units.
We should also reset the AcuRite display to make sure that we’ll only receive an accurate weather measurement.
We hope that this guide was helpful and for more relevant content, check our blog!
Read Next: AcuRite Weather Station Not Connecting?
Source: https://gardencourte.com
Categories: Outdoor
This post was last modified on 18/10/2023 23:03
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…