This post was most recently updated on May 7th, 2023
2023 is here and time to review and apply a new Brick Paver Sealer. This article is our top Paver Sealer article on our Review site and there have been over 6000 Questions and Answers and 650 Consumer Reviews on this topic.
You are watching: Best Brick Paver Sealer Reviews 2023 4.9/5 (674)
Need Help Finding the Best Brick Paver Sealer?
If you need advice on what is the Best Brick Paver Sealer for you, please ask below in the comment area at the bottom.
Brick Paver Patios and landscaping blocks have become increasingly popular in the last 10-20 years. They offer an alternative to regular plain white concrete by adding old world charm, which resembles walkways and streets of the 19th century. Brick Paver patios can be customized to be designed for any area. They are very popular for driveways, walkways, around pools, etc. Of course, with any exterior horizontal surface, there is a need for general maintenance with brick pavers by cleaning and sealing on a regular basis.
Brick paver sealers are water repellents and coatings that are specifically designed to be used on paver stones and blocks.
Brick Paver Sealers have 3 major functions:
Read more : 14 Ways to Keep Patio Furniture from Blowing Away
Well, there isn’t one that stands out from the rest for all scenarios. To determine what paver sealer is best you must first understand the differences between the paver sealers and what you would like to achieve when done.
When choosing a paver sealer is best to understand that not all acrylics are created equal. There are many paver sealers that contain inferior acrylics that will blush to turn white in color. Notably Behr Wet Look Sealer and H&C Water-based sealer. Best for a paver sealer is one that does not seal the surface 100% but rather breathes. These sealers are less prone to trapping moisture, which may lead to the dreaded white haze. Most high-quality water-based sealers will not blush as they are thinner in viscosity. Solvent-based sealers containing a solid acrylic will have a tendency to blush/turn white. If you choose a solvent-based sealer, make sure that it is a “Styrene” acrylic as these have tiny pinholes that allow the coating to breathe.
Traditionally, these are the most popular and have been around for the longest time. These paver sealers are typically high in acrylic solids and will darken the surface. Available in Matte, Semi-Gloss, and High Gloss shine. Due to changes in many state’s VOC laws, solvent-based sealers may not be available locally but rather purchased online.
Crystal clear in liquid form. Popular solvents are Xylene, Toluene, and other Aromatic Solvents.
Pros: Last about 2+ years. Darken the color more so than water-based sealers. Add a higher level of gloss if desired. Typically only one coat is needed. A higher level of protection against UV degradation and fading. Better for vehicle traffic.
Cons: It May need to be rolled on as many cannot be sprayed (too thick). It will not solidify joint sand as well as a water-based version. Square footage is less, typically about 100-125 sq. feet per gallon.
Water-based versions of paver sealers have been forced on the scene in the last 5-10 years due to low VOC (volatile organic compounds) laws. Currently, there are over 16 states in the US that restrict the availability of solvent-based sealers. Water-based sealers still contain acrylics but will have a lower solid content.
Milky white in liquid form that dries clear.
Read more : Blog
Pros: Easily applied with a garden-type pump sprayer. Will penetrate better into the substrate and sand joints. It hardens jointing sand better. Square footage is better than solvent-based sealers. Typically 150-200 sq. feet per gallon.
Cons: Multiple coats are needed. Will not darken as deeply or leave a high gloss like a solvent-based paver sealer. Medium level of protection from UV degradation and fading. Softer acrylics can be prone to tire marks on a hot day.
A side function of paver sealing is the ability to help solidify or stabilize the jointing sand from erosion. While most paver sealers will do this to some extent, some are designed specifically for this purpose. Examples: SB-1300 and SB-7000.
“Wet look” sometimes gets confused with “gloss”. Using a paver sealer that will leave a “wet look” means you are darkening the surface similar to as if it was wet with water. These sealers may or may not contain a shine level of some sort.
Gloss sealers will add a shine to the surface ranging from matte to high gloss. In most scenarios, you will also darken the pavers with a wet look. These sealers may be prone to being slippery when wet.
Need Help on Finding the Best Brick Paver Sealer?
Hopefully, you now have a better understanding of the different types of paver sealers that are available. If you would like help choosing a paver sealer please answer these questions in the comment area below:
Answer 5 Questions in Comment Area to find the Best Paver Sealer for you!
Source: https://gardencourte.com
Categories: Outdoor
This post was last modified on 12/10/2023 04:49
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…