Bleach Bath for Hair: What It Is and How to Do It
Going blonde or lightening the hair without the horrendous damage remains a fantasy to everybody.
Almost the entire population of hair dye enthusiasts is in a love-hate relationship with bleach. We despise the aftermath of the process just as much as we love its transformative results.
You are watching: Bleach Bath for Hair: What It Is and How to Do It
But despite the tingling and burning pain that we have to endure from every session, we can’t deny the fact that bleaching is our best resort when it comes to trying out different hair dyes.
And then a trend touted as the “gentler way of bleaching” started surfacing on the internet: bleach baths. Is this really the solution we’ve been praying for?
What is a bleach bath for the hair? How do you do it? Read on to find out!
A bleach bath may sound foreign to most of you, but it’s a technique widely used by salon professionals.
Basically, it’s a concoction made by mixing hair-bleaching powder with peroxide as you’d typically do.
But this time, clarifying shampoo is diluted into the mixture, turning it gentler and milder in getting rid of stubborn hair dyes without the harshness of regularbleach.
With bleach baths, the results can be double-edged. It can be perfect if you’re looking for minimal lifting, but it might not do you favors if you want to go all the way with the lightening.
It doesn’t matter if we change the name and alter the procedure; we all know that the presence of bleach in whatever formula can result in damaged hair.
Exposing your hair directly to a regular bleach mixture can result in intense lightening (up to eight or nine levels), leading to fried and fragile hair due to the aggressive chemicals it contains.
And then the bleach bathing the hair came into existence, offering a gentler alternative. Still, it comes with downsides.
There are three ways to tell how distinctively different they are:
Just by looking at the process and strong chemicals involved in regular bleach, you can tell that the relatively less damaging effects of a bleach bath on hair come from diluting the bleach and using less peroxide.
Thus, opting for bleach baths might require more repetitions than the regular bleach process if you want intense color lifting.
A bleach bath is a great alternative to traditional bleach, and we can attest to that.
However, you must set your expectations appropriately because you’re basically dealing with a weakened bleach mixture.
Remember, it’s a gentle solution that can give mild results, so completely stripping dark tones from your hair to make way for a new one may not come easy.
It’s not like we can’t have the best of both worlds and have lighter hair with minimal damage; bleach bath is still the perfect option if you’re stuck in situations where
The necessary tools and products needed to perform a bleach washing are pretty much the same as what you’d use for your typical hair bleaching session.
Here’s what you’ll need:
If you have all the tools ready, prepare for the application process.
Before using harsh hair products such as bleach, make sure to give the product a dry run into your skin to avoid serious side effects.
Mix a small amount of bleach powder and developer, and use a cotton swab to apply the mixture on areas like your arms to check how your skin would react to the chemicals.
If no itching, bumps, or red patches appear, then it’s safe to apply it on your head.
Most people skip this step, but prevention is always better than cure, especially when dealing with strong chemicals.
This is perhaps one of the most distinctive differences between regular and bleach baths.
Applying a bleach bath on dry hair is a no-no; make sure to dampen or wet your hair before the procedure.
Read more : Essential Oils for Itchy Dogs
You take this opportunity to remove residues from your hair by giving it a good run with a sulfate-free clarifying shampoo.
Doing this will give you a better view as to how light you still need your hair to be. It also washes away other chemicals that can interfere with the bleach.
Bleach baths are intended to be applied to wet hair. This allows the formula to be smeared into the hair faster and more evenly.
It is also another reason why this technique is gentler. As the bleach interacts with the water, it gets diluted and eventually weakens.
Once you’re done, you can let your hair air dry a little to proceed to the next step.
Give your checklist one last scan to see if you have everything on hand. Once you do, you may now begin concocting your bleach bath mixture.
The bleach wash ratio is 1:2:1.
Start by combining one part bleach and two parts developer as you’d usually do.
This may vary depending on your brand choice, but another crucial part that will have a huge impact on how effective your bleach bath will be is the intensity or percentage of the developer used.
10 to 20 volumes should be good enough for a gentle lift. But if you need more intense action, you can use 30-volume developers.
The addition of clarifying shampoo into the mixture transforms your typical bleach into a bleach bath hair recipe.
The ideal proportion is adding equal parts bleach and shampoo, but some people tend to eyeball this.
To guide you further, adding more shampoo dilutes the bleach for softer lightening, and adding fewer concentrates the mixture for stronger color removal.
You can also add in a few drops of hair treatment to ensure optimal protection.
Before anything else, grab your safety gear. Wrap that old towel or cloth around your shoulders and put on your gloves because your mixture can still sting if it touches your skin. These should protect your clothes too!
By this time, your hair should still be damp.
Clip your hair into several sections, and using a tint brush, start applying the mixture from the bottom of your hair and work your way to the roots. Run it with your wide-tooth comb after to make sure each strand is evenly coated.
Repeat this process until you have your entire head lathered with your bleach bath mixture. You can put your hair up and cover it with a shower cap or cling wrap to prevent messy drippings and stains.
It can sting and itch as it stays on your scalp, but while it cooks your hair, remember to keep an eye on it.
So how long should a bleach bath stay on hair?
It depends on your hair’s current condition and the amount of lightening you need.
If you already have light hair, check on it once it reaches seven to ten minutes.
But if you’re eliminating dark permanent dyes, you will have to let it seep for at least 10 to 15 minutes or up to 30 minutes.
Once the alarm goes off, give it a good rinse.
Wash out the solution using warm water. Toners may come in handy if you want an extra lift or if your hair went a little over to the brassy side.
If you’re not into dyeing your hair right after bleaching, you can also reach for a deep conditioner to treat your hair and give it a little life back.
Despite the glorified effects of bleach bathing your hair, you still have to do this procedure under safety precautions. After all, it’s still bleach we’re dealing with.
However, the list of benefits you can get from a hair bleach bath outweighs the risks. This technique might really be a gift sent by the gods of hair treatments.
Read more : DIY Lush Ocean Salt Face & Body Scrub – Lush Ocean Salt Copycat
The bleach bath recipe for the hair calls for ingredients and tools accessible from your local drugstores, online shops, or home.
This saves you hundreds of dollars worth of salon appointments and allows you to do the procedure anytime you want.
Plus, the application process is much easier than the conventional way of bleaching. The bleach bath instructions require application on wet hair, making the whole process easier and less painful from start to finish.
Since damp hair is easier to manage, you would have to worry less about getting uneven patches and skipping a few strands. Rinsing won’t be a nightmare as well, as the bleach mixture slides off smoothly.
The days of having beautiful, freshly colored hair won’t last long, and eventually, you’ll have to retouch or redo your hair or completely switch colors.
And the number one reason that may stop you from doing so is perhaps the leftover stains or tints from the previous color.
Yes, reprocessing an overall traditional bleach can wash the leftover dye off, but doing it too soon would only do you more harm than good. This is when bleach bathing steps into the scene.
A hair bleach wash works on human-hair wigs and extensions too!
The procedure is pretty much the same as the previous steps mentioned in this article. Bleach and developer are still combined, then shampoo is added to the bleach mixture.
But instead of applying it on wet wigs or hair extensions like applying it on wet hair, you’ll have to add water to your bleach-developer mixture instead.
Submerge the wig or extensions in the mixture and brush it there.
This video gives a good example of how to do it:
Yes, but it still depends on the condition of your hair after the bleach bath.
If you feel like your hair has been beaten up badly by bleach shampooing, then it’s best to give it at least three days to a whole week before dyeing it again.
And if you decide to do so, the ideal type of dye to use is semi-permanent dye. Most of these dyes don’t have ammonia and can be used without developers. This will prevent hair cuticles from opening further.
Purple shampoo or toners should be part of your arsenal when dealing with yellow or orange hair after bleaching.
Most people tend to think that adding it to the bleach solution is a way to lighten the hair faster and you won’t have to tone it afterward. This is a common misconception and is not a very wise move to make.
In general, bleach targets color pigments, and the peroxide in the bleach mixture will only eat the purple pigments in the shampoo away, as well as the entire point of adding it to your shampoo.
Plus, the shampoo will also affect your bleach mixture’s ability to effectively lift the colors off your hair.
Yes, you can do a bleach bath to remove black hair dyes, but the efficacy still depends on the intensity of color you want to remove. It’s safe to say that it works best if you want your hair lightened by a few shades or if you have light-colored hair to begin with.
Whether you have it naturally or got it through box dyes, black is one of the most complex colors to tame. Even the bleach mixture would require a repeated process to have the hair gradually lightened with as little damage as possible.
Meanwhile, a bleach bath is far gentler on your hair, but it won’t be able to provide a powerful lifting. It can only do up to two levels lighter.
And repeating the process would make your hair more susceptible to the same damage as regular bleaching, which defeats the purpose of bleach bathing.
Whether you’re doing the conventional way of bleaching or bleach wash for your hair, you have to remember that it’s still bleach you’re dealing with.
Anytime you’re stepping into these kind of hair procedures, make sure you’re equipped with the proper research and knowledge, otherwise, it’s better to leave it to the hands of professionals.
Bleach bath may be gentle on your hair and but it can also result to irreversible damage if you fail to execute it properly.
So, take your time and don’t rush the process. The best version of your hair is still the healthiest state it can be.
Read these articles!
Source: https://gardencourte.com
Categories: Recipe
This post was last modified on 21/10/2023 14:37
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…