Blink Camera Not Working: How To Fix In Seconds
One day, out of the blue, one of my Blink cameras had a green light turn on and when I checked the app, the camera was no longer on the list of cameras.
I needed to keep an eye on the house while I was gone because I was expecting the contractors who were going to work on my electrical system in the next few days.
You are watching: Blink Camera Not Working: How To Fix In Seconds
When I checked out online on why this could happen, I found that it could be traced to a number of reasons.
So I tried troubleshooting the camera myself before calling support, and I was successfully able to fix it.
You’ll find below everything that I had found that actually works to fix your Blink camera if it doesn’t work anymore.
If your Blink camera doesn’t work, you can try restarting or resetting the Sync Module for your cameras. You can also reset your router if your internet connection is having issues.
Blink cameras are pretty good at what they do, but like every piece of tech, they are not immune to problems.
These issues can be attributed to a whole bunch of reasons, but at the end of the day, all of them don’t let you use the camera as intended.
Fortunately, Blink cameras come with an LED status light that roughly tells you what the issue is.
But you’ll need to know what to look for to understand what your camera is trying to tell you.
The following table will give you an idea about what each colored light on the Blink camera means. The indications may vary from model to model.
A steady red light on your Blink camera usually means that it isn’t connected to your Wi-Fi.
Check out the steps below if the LED on your camera is showing a steady red color.
The Blink app can freeze or become unresponsive at times due to which you might not be able to control your Blink camera.
Whether you are using an Android device or iPhone, just close the Blink application from the recent apps and then try re-launching it.
To do this:
If the problem is not fixed, you can uninstall and then reinstall the Blink app.
If that doesn’t work, you can also try restarting your phone and launching the app again.
If your Blink camera is not working due to internet connectivity issues, it should be showing a green light that’s either steady or blinking.
You can fix this issue by restarting your Wi-Fi router.
All Wi-Fi routers have a reset button on them. It is usually a small button, on the back or at the side of the device.
Press and hold the reset button until the router restarts.
Read more : Goldfish and Fish Ponds in Winter: Our Guide
When the router finishes the reset you’ll need to add your cameras to your Wi-Fi again in some cases because resets might also reset the password to your Wi-Fi.
Your Blink camera is managed by the Sync Module which connects it to your home’s system, to the internet, and to the Blink servers as well.
Resetting the Sync Module is considered to be the ultimate one-shot solution to fix any kind of technical difficulties.
Follow these steps to reset the Sync Module:
If the red light is blinking, it can indicate that the battery is low.
It could also mean that the camera is setting up. Which you shouldn’t be seeing again after the initial setup.
To fix the blinking red light, follow the steps below.
If you see a blinking red light on your Blink camera and use batteries to power it, then it might be running out of juice.
They usually last up to two years, so if you haven’t changed the batteries after a couple of years ,then that might be what’s causing the issue.
You can check the Blink app where the thumbnail for the camera in question will tell you if it needs replacement.
If you have a Blink Outdoor or Indoor camera:
For Blink XT and XT2 models:
Blink Minis don’t use batteries, so if you have one of those, you can skip this step.
If you power your Blink cameras using the USB adapter, then power delivery issues can also cause the cameras to not work as intended.
This will stop you from accessing your cameras because they are no longer receiving the power they need.
Use a different power adapter for your cameras or change out the USB cables to see if that fixes the problem.
If it is possible, try running the cameras that have issues on battery to make sure it is a USB issue, and not a more widespread problem.
If the light on the camera is blinking or steady green, the camera is currently experiencing connectivity issues.
To fix these connectivity issues, check out what I did.
If your Blink cameras are placed at a significant distance from the Sync Module, they might face connectivity issues.
Since the Sync Module is responsible for coordinating the cameras in your home’s security system, the placement of the module is crucial.
If your Blink camera is not working, try placing it close to the Sync Module and that might fix your issue.
Read more : How to Get Rid of Mosquitoes in Your Lawn or Yard
Blink recommends you place all your cameras within a hundred feet, which is the effective distance the Sync Module needs to communicate with the cameras.
If you cannot seem to cover all your cameras with a single Sync Module, you can get another one and add the cameras that are outside of the 100 feet range.
Add the new Sync Module to your Blink app to control those cameras.
You can also fix the Sync Module by power cycling it.
The steps that you’ll find below are very simple but extremely effective in solving Blink camera issues.
In case this does not work, reset the Blink Sync Module.
You can also try resetting your Blink cameras, but a manual reset is only required for Blink Mini models.
To reset a Blink Mini:
To reset other Blink camera models, simply reset the Sync Module by pressing and holding the reset button on its side.
After the reset is complete, add all your cameras back to the Sync Module
The Sync Module is the most important part of your Blink camera system which lets you watch live feeds and receive motion alerts on your phone.
Blink cameras and the Sync Module itself require good connectivity with your Wi-Fi network to perform optimally.
To ensure your Blink camera has a strong internet connection, you must place the sync module in an appropriate position and check for signal strength using the Blink app.
Make sure all your cameras are within 100 feet of a Sync Module.
A single Sync Module can only control ten cameras, so get another one if you have more,
If all these fixes do not solve your problem, you can always reach out for professional help from Blink’s support team.
If your Blink camera goes into an offline mode, follow these steps to bring it back to the online mode:
If the problem still persists, you can seek help from Blink’s technical support.
The Live View of your Blink camera can fail due to connectivity issues, discharged batteries, and also if the sync module is not appropriately positioned.
Sometimes the Blink app may become unresponsive or stop working due to some technical errors that are hard to detect.
In such situations, close the Blink app from your smartphone’s task manager and relaunch it after some time. If the problem persists, restart your phone and try again.
The reset button of the Blink outdoor camera can usually be found on the bottom of the device.
If you can’t access your Blink account because you’ve forgotten your password, you can reset it using the Forgot Password link.For more information, you may contact Blink’s support team and fetch their assistance.
Source: https://gardencourte.com
Categories: Outdoor
This post was last modified on 12/10/2023 19:06
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…