Many products you often buy can easily be made in the comfort of your own home, from furniture DIYs to homemade cosmetics like hair masks or body scrub — you might be surprised by what you can make yourself. Homemade soap might pique your curiosity, especially if your favorite bars are currently sold out or hard to come by. And while it seems simple enough, the experts in our Good Housekeeping Institute Health, Beauty, and Sustainability Lab say that making soap from scratch is a serious endeavor that requires more than just a few kitchen tools and some basic skills.
Making soap at home requires two types of ingredients — an acid and a base. These chemically react together in what is called “saponification” and produce the soap along with glycerin as a byproduct. No commercial or homemade soap can be made without these two ingredients. The soap you make won’t kill germs, but it will certainly wash them away as well as any other bar soap you might buy.
You are watching: How to Make Homemade Soap, Even If You’re a Beginner
Many DIY soap recipes call for using lye (the common name for sodium hydroxide) as the base. But lye can be hazardous to work with at home. “Lye is caustic not only when it touches skin, but the fumes it generates when mixed with water are caustic to your eyes and mucous membranes. So, you’ll need to work in a very well-ventilated area,” says Charmaine Rodriques, a former chemist in the GH Beauty Lab and current Regulatory Affairs Manager at Parfums Christian Dior.
If you do choose to make soap with lye, Rodriques, who has been making and perfecting her homemade soap for over 15 years, recommends the following:
We’ve come up with a simpler and safer method for making your own hand or bath soap at home without lye. For safety reasons, our Institute experts recommend following “melt and pour” soap-making recipes from reputable retailers. These recipes are easy and fun to make at home — even with kids — and you won’t have to deal with the potential dangers of working with lye or learn the chemistry of the saponification process.
Read more : Self-Levelling Guide – Learn How to Easily DIY!
Here’s how make a perfect melt-and-pour soap at home:
If you are a beginner, the simplest way to start is to purchase a soap base — a pre-mixed combination of the soap, glycerin, and a few add-ins like plant butters and extracts for skin benefits, along with additives for transparency or fillers for making opaque bars. We recommend buying from a reputable website, like Bramble Berry Handcraft Provisions, which offers a variety of supplies and has multiple recipes for making different kinds of soaps.
Bramble Berry’s beginner’s guide to the melt and pour process walks you through the steps one by one and provides complete recipes for beginner, intermediate and advanced soap making. If that’s still a little too ambitious for you, start with Bramble Berry’s simple translucent base. All you do is melt it, mix in your favorite fragrance oil, and mold it.
Pro tip: When buying fragrance oil online, make sure it is cosmetic grade (or use one of your own favorite fragrances). We like the Made Safe certified essential oils by Radiance.
Most ready-made melt and pour recipes can be done either in the microwave or on a stovetop in a double boiler over low heat. Both techniques work well, but doing it on the stovetop can give you more control and allows you to better see when the base starts melting. It also prevents hot spots or overheating that can happen when melting in the microwave. Have pot holders or heat-resistant gloves or mitts handy when handling these hot implements. Here’s how:
Pro tip: Avoid stirring the base while it’s melting as this can trap air bubbles. Instead, let the pieces melt on their own or move any solid pieces gently around in the container.
Read more : Essential Oil Remedies for Hemorrhoids
If you are not following an exact recipe, it might take a little trial and error to figure out how much fragrance to add to your soap. A general rule of thumb is to add about 1 teaspoon of fragrance per pound of soap.
The key to success in this step is to get the base to a high enough temperature so it’s molten and easy to mix, but low enough so the volatile compounds and scent notes in the fragrance don’t evaporate. Here’s how:
Pro tip: The base will cool down and start to solidify within minutes. Re-melt it by returning the container back to the microwave or stovetop over very low heat for a few seconds and give it a quick gentle stir.
Carefully — but quickly — pour the molten base and fragrance mixture into your mold.
Pro tip: Fill the molds as close to the top as possible. The soap won’t rise or expand upon cooling.
Pro tip: Depending on your mold’s size and shape and your room temperature, soap will take at least an hour to harden. It can take up to 24 hours for large molds to fully solidify.
Source: https://gardencourte.com
Categories: Recipe
This post was last modified on 12/10/2023 13:05
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…