Hanging a chandelier over your dining room table not only lights the room, but it also adds style and a decorative flourish to the space. It is often the primary design feature and focal point of the room. Because it gets so much attention, getting the chandelier’s height right is essential.
But don’t worry, while this may seem complicated, we’re here to help. Begin with the standard height recommendations and make adjustments as needed from there. It’s as simple as that. If you like how it lights the room and adds to the décor, you’ve done it right.
You are watching: Guide to Hanging a Chandelier in Your Dining Room
When you hang a chandelier above the dining room table, the lowest part of the light fixture should be 30-36 inches above the table’s surface. This is based on the assumption that your ceiling is 8 feet high. If your ceiling is higher, hang the chandelier three inches higher for every additional foot of height. For instance, if you have a 10-foot-high ceiling, your chandelier would be hung 36-42 inches above the table’s surface.
This standard recommendation is an average, but here’s where it can get complicated. Before you hang your chandelier, consider the room size, table size, and how much light the fixture provides.
The sculptural botanic aesthetic of the striking Dahlia 32 Inch 6 Light Chandelier by Hubbardton Forge references its namesake flower with forged-steel petals that flare out from exposed bulb sockets.
For some, adjusting how high you hang the chandelier to accommodate the size of the room is controversial. Some designers feel that is unnecessary. This makes sense if you think that the chandelier’s primary role is to shed light on the table.
Read more : How Much Does an Outdoor Kitchen Cost?
However, there are valid reasons to adjust for room size or ceiling height. While a chandelier’s function is to illuminate the space, its role is to be a design feature. That means that you will want to take into consideration how the chandelier works with the room’s design.
To do this, evaluate how the chandelier looks from different vantage points:
This is especially important if the dining room is part of a great room or open-concept space. Be sure to visualize how the chandelier looks from every common area in the space.
Abstract shapes finished in brushed champagne intersect in an intriguing sculpture of luminous light. Unity 55 Inch 5 Light LED Linear Suspension Light by ET2 Lighting brings art and illumination when you want to make a statement with unique lighting.
The style and size of the chandelier may also influence the height at which you should hang it. If your chandelier is beautifully elaborate, it will take up a lot of visual space. Hanging it a couple of inches higher than the standard height will help show it off and keep the room design balanced.
Perfect for a space with high ceilings, the Aerin Jacqueline 32 Inch 12 Light Chandelier by Visual Comfort and Co. grabs your attention and won’t let go. It’s perfect for defining the dining area and is a beautiful sculptural focal point in the space.
The standard recommendation for the size of a dining room chandelier in relation to the dining room table’s size is that the light fixture range from one-half to two-thirds the width of the table. Another way to determine the size is to select a chandelier that is one foot smaller in diameter than the dining room table’s width. This means if the table is 42 inches wide, the light fixture’s diameter should be 30 inches or less.
Read more : 6 Stinky Reasons Your Kitchen Sink Smells Like Sewage
This range helps keep the chandelier and dining room table in proportion, so your dining room design won’t be out of balance. It also keeps people from banging their heads as they sit down or get up from the table.
The perfect mix of function and décor, the enchanting Piemonte 43 Inch 12 Light Chandelier by Corbett Lighting brings a luxurious glow that enhances this dining room. It’s the ideal shape and size to define this open-concept space.
If your chandelier is on the larger side in relation to your dining room table, hanging it a little higher will help avoid unpleasant collisions. If it is smaller or unusually narrow and long, a series of fixtures or pendants might be a better choice for the space than a single chandelier.
Giving the space a trendy, modern vibe, the Giada 38 Inch 3 Light Linear Suspension Light by Hinkley Lighting features three chandeliers with stunning crystal prisms in a black metal frame. It creates a seamless, sparkling, jewelry-like effect that brightens the space.
Keep in mind it’s about design and functionality when choosing and hanging a chandelier. To test how much your chandelier illuminates the table, there is no standard formula or rule. How the chandelier casts light onto the table is affected by a number of things, such as the design of the chandelier, the light bulbs used or lumens emitted, and the height.
The best way to test the lighting effect is to hang it over the table and light it up, even if temporarily. This lets you see the chandelier in all types of lighting conditions and assess its height for functionality and design.
If you are looking for a stunning chandelier for your dining room, come into the Capitol Lighting showroom near you to experience all our chandeliers on display. Or, schedule a design consultation and speak to a lighting specialist who can help you find a chandelier that is the right size and style for your dining room.
Source: https://gardencourte.com
Categories: Kitchens
This post was last modified on 11/10/2023 22:05
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…