Installing a dishwasher in existing cabinets where there was none

The process of installing a dishwasher in existing cabinets where there was none before.

Sticky pots and pans with their splattered lids wait patiently for you after dinner. And you shudder at the sink filled with more dirty plates and utensils than you knew you owned.

You are watching: Installing a dishwasher in existing cabinets where there was none

All you want to do is dump everything all in a hot, soapy machine so you can wake up in the morning to clean, sparkly dishes.

Like, maybe, a shiny, new dishwasher, planted right next to your sink, waiting for your command.

Today, I have some very exciting news… are you ready for it?

We finally added a dishwasher to our existing cabinets!

That’s right, we are done with piles and piles of messy dishes in the sink. A dishwasher was one thing I had to have when we bought our house and now I have finally it!

But before I walk you through how it was added to the existing cabinets, have a look at a ‘before’ picture.

Here is what our kitchen looked like on the day we got the keys to the house:

GETTING STARTED

We had a short list of things we wanted to add or change when we installed the dishwasher.

First, we wanted to update the plumbing under the sink and add a garbage disposal. And since we were adding the garbage disposal and dishwasher, we had to add power to the area. Finally, we wanted to add a new faucet because our old one leaked.

I am very lucky to have a dad who did all of this for a living at one point in his life. And last year, when my parents asked what we wanted for Christmas, I said that I wanted my dad to add my dishwasher into my kitchen.

Read more : Everything You Need To Know About Ceiling Paint

Now, I told them this in October, hoping it would be done by Christmas. But, if you know my dad, you know that he is always busy helping someone with some project after his full-time job.

The other day, he finally called and told me he was coming to add the dishwasher (there may have been a little push on my side, like getting a bid from a plumber to install the dishwasher and then my dad finding out!).

Now that he was coming over, I had to get things ready for the install.

PREPPING FOR INSTALLATION

I first removed all the cabinet drawers and cleaned everything out from under the sink. I also made sure all the supplies were in the kitchen (garbage disposal, faucet, and plumbing parts).

Once my dad arrived, things got underway quickly.

The first thing was fixing the cabinet to fit the dishwasher. We planned on saving all the old wood and reusing it to make the new cabinet. My dad measured the area where the dishwasher needed to fit.

A dishwasher is normally 24″ wide and 34″ tall but it’s always best to measure your dishwasher.

Then, out came the Sawzall, hammer, nails, and screws to make an opening 24” wide to fit the dishwasher.

You will be cutting the cabinet all the way to the floor. You need to measure the distance from the floor to the countertop to make sure you have the 34” to fit the dishwasher.

SIDE NOTE: You could have a small trim piece just under your countertop to give you the 34”.

Here is how we reworked the small cabinet next to the dishwasher:

RECONFIGURING THE PLUMBING

After fixing the cabinet, my dad took out all the old plumbing. I wish I have taken a picture of the one pipe that had lots of build up inside.

Read more : 10 Easy Kitchen Updates {on a Dime!}

I told my dad I wanted two P-traps under the sink and he agreed. This will help with water flow. I also wanted to change the sink strainer to one that actually worked.

Here is the old piping under the sink; you can read about cleaning copper pipes here.

And now it was time for the new faucet.

We wanted something simple that had two handles, high arch, stainless finish, and a sprayer. We did not have very many choices but we decided on the Delta Lewiston. The faucet was only $129 before tax. After using it for one week, I am in love with it (our old one was horrible).

Sorry, there are no pictures of adding the new pipes or electrical because I had to run some errands. And when I got back, it was all done!

But look at the mess we were in for the day:

There is still some work to do to finish this project off, like building a cabinet door and rebuilding a drawer.

And, I am going to add vinyl tile under the sink to replace the old vinyl.

But so far, the final results are amazing! I feel like I have a new and improved kitchen.

I have been hand washing dishes for the past 3 years and it’s great having an extra 20 minutes in the morning not washing dishes. Thanks again, DAD!!!

Anyone else adding a dishwasher or need/want to add a dishwasher? Or doing a kitchen remodel?

See our we updated our kitchen cabinets without replacing them by adding trim.

Source: https://gardencourte.com
Categories: Kitchens