4 Easy Ways to Hang Curtains Without Drilling

Are you looking to add some privacy or style with curtains but don’t want to drill holes in your walls or window frames? Whether you’re renting and can’t make permanent changes to your space, or you simply don’t want to deal with the hassle of drilling and patching later on, we’ve got you covered.

Let us show you four tried and tested no-drill options for hanging curtains. We’ll discuss their pros and cons and provide step-by-step instructions for achieving a beautiful and functional window treatment without drilling any holes.

You are watching: 4 Easy Ways to Hang Curtains Without Drilling

Put your drill and spackle aside, and let’s get started.

Kwik-Hang’s patented no drill curtain rod brackets are the ultimate solution to all your curtain-hanging woes! If you’re tired of taking endless measurements and drilling holes into your walls, only to end up with uneven curtains, Kwik-Hang’s got you covered.

Our innovative bracket design is hassle-free and takes just minutes to install on wooden window frames, requiring zero measurements or damaging your walls. With a weight capacity of up to 20 pounds, you can confidently hang even heavier drapes with ease.

Kwik-Hang allows you to achieve perfectly aligned curtains every time without drilling. In two simple steps you can have your curtains up in no time — just position the brackets on the corners of your window frame and tap them in with a hammer.

Read more : 7 Party Rental Items to Make Your Party Memorable

Unlike other no-drill curtain hanging solutions, Kwik-Hang rod bracket won’t dislocate, fall or sag over time.

How to Use Kwik-Hang Brackets to Hang Curtains

1. Position the curtain rod brackets on the corners of your window frame.
2. Tap them in with a hammer and you’re done!

Do you want to hang curtains on a metal door or window? Magnetic curtain rods might just be perfect for you. They are easy to install and require no hardware or tools.

Usually, magnetic curtain rods have a design with adjustable width that ensures a perfect fit for your choice of curtains. Depending on the brand and design, their weight capacity ranges between 5 and 30 pounds. Cheaper options usually carry less weight so if you want to hang heavier drapes, it will cost you more.

It’s important to note that magnetic curtain rods can easily shift out of alignment, making them less convenient for high-traffic areas. Also, if you want to prevent and control curtain sway, it’s best to use top-and-bottom rods.

Magnetic curtain rods are available online on Amazon, as well as in major retailers like Home Depot and Walmart.

How to Use Magnetic Curtain Rods to Hang Curtains

1. Measure your window opening to determine what size curtains you need.
2. Make sure the space between the edge of the window and the edge of the door will accommodate your magnetic curtain rod bracket.
3. Click the bracket onto your metal door, then thread your curtain onto the rod and place the rod into the bracket.

While there are different types of adhesive Command hooks, Forever Classic would be the most suitable for hanging curtains. This particular design can accommodate a rod diameter of up to 1.6 inches and hold up to 5 pounds, making them a good choice for lightweight curtains, such as sheer panels or small cafe curtains.

Command hooks stick to flat, smooth surfaces, like painted walls or concrete, finished wood, plastic, glass, metal and tiles. However, they won’t work on wallpaper, exposed brick or other textured surfaces.

Read more : How to Hide Security Cameras: Best Outdoor & Indoor Ideas 2023

When compared to other no-drill solutions for curtain hanging, Command hooks offer ease of installation and removal. However, they have significantly lower weight capacity than other options. They also require careful measuring and marking, which may be more time-consuming.

How to Use Command Hooks to Hang Curtains

1. You’ll need at least two Command Hooks to hang your curtain rod. If your window is wider than 30 inches, you’ll need a third Command Hook to support the middle.
2. After you’ve carefully measured your curtains, mark your wall where each hook will adhere.
3. Peel off the Command strip adhesive and apply it to the hook.
4. Press the Command Hook firmly onto the wall for at least 30 seconds, and repeat with the other hook.
5. Wait at least 30 minutes before hanging your curtains.

Available in a variety of lengths, diameters and finishes, tension rods are an affordable and versatile option for hanging curtains. These adjustable rods stretch from one side of the window frame to the other and can be installed in minutes without any complicated measurements or hardware.

Due to their design, we wouldn’t recommend tension rods for hanging curtains from the top of the window, but they’re an excellent choice for cafe curtains, doors and bathrooms.

How to Use Tension Rods to Hang Curtains

1. Purchase the tension rod that’s closest to your window frame size (measured on the inside of the frame).
2. Test the tension rod by screwing or unscrewing the rod until it fits snugly inside the window frame.
3. Remove the rod, thread your curtain onto the rod, and then reinsert it into your window frame.

The #1 Way to Hang Curtains Without Drilling

If you’re looking for the easiest way to put up your curtains without damaging the walls, you can always count on Kwik-Hang’s damage-free curtain rod brackets and holdbacks to get the job done in no time.

Kwik-Hang is the number one way to hang curtains on wooden windows without drilling!

• Sturdy, stable and supports all types of curtains and fabrics
• Doesn’t require any measuring, drilling or adjustments
• Get perfectly aligned curtains every time
• Affordable and suitable for every room of your home
• Looks beautiful and works seamlessly with your current home decor

Kwik-Hang’s no-drill hardware is available in a variety of colors for both single and double curtain rods. Center support brackets are also available for curtain rods longer than 30”.

Try Kwik-Hang today!

Source: https://gardencourte.com
Categories: Outdoor