Measuring your kitchen accurately is a vital first step in the kitchen remodeling process. Whether you’re planning to work with a professional designer or are simply “spec-ing” your project for reference, it’s helpful to have accurate measurements of any space you plan to renovate. Since kitchens are the most popular place to focus home renovations, here are some tips on how to create a handy homemade set of measurements.
Gridded paper. Lined notebook paper will also work if you do not have access to graphing paper.
A pencil (perferable to a pen so errors can be erased).
A standard, 25-foot tape measure, or laser measure if you have one available to you.
A camera (a smartphone camera is ideal so that you can bring your photos when you meet with your designer).
HOW TO MEASURE FOR NEW COUNTERTOPS AND CABINETS
Step 1: Sketch Your Kitchen
On gridded paper (it’s easier) sketch out an outline of your kitchen. It doesn’t need to be to scale.
Add the general location of any windows, doorways, columns, etc.
Add the general location of your sink and appliances.
Step 2: Measure Your Countertop
Using your tape measure, find the measurements of your existing countertops.
Start with the length, from one end of the countertop to the other, then move on to the width and measure from the wall to the outer edge of the surface.
Record these measurements and include them in the sketch of your kitchen.
Step 3: Measure The Kitchen Walls
With the use of a laser measure or a good, old-fashioned measuring tape, measure the length of all walls.
If there are any obstructions, like a fireplace, include that in the overall wall length as well. Indicate those dimensions on your plan.
Step 4: Measure The Height of Your Kitchen
Measure the height of your room and include any soffits (the parts of the ceiling that drop down, often above a cabinet). Also measure the height of any soffits from both the ceiling and the floor.
Step 5: Measure the Windows and Doors In Your Kitchen
Now, measure windows and doors from the outside edge of the trim on one side to the outside edge of the trim on the other.
Measure the height of the doors and windows, from the floor to the top of the trim.
Measure from the nearest corner to the center of each window and door. Note all these measurements on your sketch.
Step 6: Locate your Kitchen utilities
Locate any utilities, like water supply and drain lines, electrical outlets, and HVAC vents.
If you can’t see the gas line, just measure to the center of the range. Add these locations to your plan.
Step 7: take pictures of your kitchen
Finally, take some pictures of the space, including views of all the walls.
Meet With an Expert
Bring all this information with you when meeting with potential designers, builders, remodelers, or product providers.
Want to do it all digitally? Check out online resources like SMARTDRAW.COM.
For more renovation planning tips, check out Cambria’s Kitchen Visualizer which lets you experiment with the full Cambria design palette and different finishes—from countertop profiles to paint—in a virtual environment. See your vision come together in just a few clicks.
Garden Courte is a blog written by [James Marcus], a passionate gardener and writer. She has been gardening for over 20 years and has a deep understanding of plants and how to care for them. In her blog, she shares her knowledge and experience with others, providing tips and advice on gardening, plant care, and more.