How to Remove a Stuck On Garden Hose From a Spigot

Removing a garden hose that’s stuck onto your spigot can be extremely frustrating.

In some cases, it can cause significant amounts of damage.

You are watching: How to Remove a Stuck On Garden Hose From a Spigot

For example, if you can’t get your hose off a spigot during harsh winters, the water inside may have nicked the hose or even the plumbing pipes. If you live in areas with heavy snowfall, the water inside the pipes can freeze and damage your outdoor spigot for good.

Fortunately, there are some methods you can use to remove your stubborn garden hose from the spigot. Let’s take a look.

Removing The Stuck On Hose From The Spigot

Turn the Hose Counterclockwise

Start by simply turning the hose collar counterclockwise while trying to remove it. You may have unknowingly turned the hose to the right side and tightened it. Gently jiggle the hose forward and backward and side to side. This helps loosen the hose from any external materials like debris that could have jammed the threads in the fixture.

For better results, try wearing a pair of rubber or leather gloves for extra grip.

Use Pliers or a Wrench

If the step mentioned above doesn’t work, you may want to try using a wrench or pliers to loosen the tight hose. What you want to do first is apply some WD-40 or any other lubricants you can find inside the threads and let them rest for a bit.

Read more : Build Your Own Pizza Oven

If your hose is rusted or corroded, the lubricant can smoothen the surface, making it easier to remove.

After which, use the wrench and pliers to unfasten the hose comfortably. Mostly, this should do the trick. But if it doesn’t, then don’t worry. You can try out the following method.

Use a Heat Gun

If, after following these methods, your garden hose won’t unscrew, you may want to heat the hose with a hairdryer or heat gun. Scientifically, subjecting a piece of metal to heat makes it expand. Therefore, subjecting the hose to a significant amount of heat can make it expand and eventually loosen it.

You can unstick the hose nozzle with a pair of locking pliers after heating it.

Remove the Hose With a Hacksaw

Sometimes the hose is so tightly stuck onto the spigot that the only option left is using a hacksaw to cut open the hose.

How Do I Use a Hacksaw to Cut The Coupling?

This is a little tricky because you want to ensure that you saw the hose vertically and perpendicular to the threads. You have to keep working the hacksaw through the coupling of the hose.

But ensure that you don’t cut through the spigot.

Read more : 22 Top Team Building Games That People Will Actually Want To Do

After you get some leverage, take a pry bar or any flathead screwdriver and gently work the incision you made with the hacksaw.

Next, take your pry bar and twist the cut from the inside to try and break the coupling. You may have to do this a couple of times before succeeding. Use the hacksaw to work the cut some more if you can’t seem to break the coupling. It won’t be long before the coupling snaps.

Once the coupling snaps, you will be able to remove the stuck-on hose from the fixture.

How Do I Prevent This From Happening?

Removing a stubborn hose from a spigot is a tricky task.

After it’s happened once, you don’t want it happening again. Here are a few steps you can follow to prevent that from happening.

• Ensure to loosen the hose from the spigot entirely at least once a month.
• Clean any corrosion you see on the hose.
• You should add a layer of plastic or brass if you have a brass spigot and aluminum hose end.
• Store your hose and hose reel inside during the winter months

Conclusion

If you ever found yourself scouring the internet for results on “how do I loosen a hose?”, then your search ends here!

Follow these simple steps mentioned above, and you’ll be able to remove that stubborn hose from the outdoor spigot.

Get cranking!

Source: https://gardencourte.com
Categories: Outdoor