How to reset Blink cameras

Blink cameras are some of the best mid-range smart cameras available in 2023. Everything in the Blink lineup is easy to install, easy to use, and offers everything you’d want in a security camera – such as motion alerts, night vision, and high-definition video capture.

However, if you’re preparing to sell the devices or are encountering technical hiccups, you might consider resetting your Blink cameras. This process is just as painless as the initial setup, although it varies slightly from camera to camera. Here’s a closer look at how to reset Blink cameras and how to reconnect them to your Wi-Fi network.

You are watching: How to reset Blink cameras

Is there a reset button on Blink cameras?

All Blink cameras have a reset button on them somewhere. Although for the cameras that connect to the Sync Module, you would reset the module instead of resetting the camera itself. The Blink Mini’s reset button returns the unit back to factory default settings.

How to reset most Blink Cameras

Most Blink cameras (the Indoor, Outdoor, XT, and XT2) require a Blink Sync Module to work and connect to your phone or other devices. The Sync Module is what connects all cameras to the internet. That said, instead of having to reset your cameras, you can simply reset the module and then re-add the cameras to it. Mind you, you may want to power cycle your modem and Sync Module before resorting to resetting the system.

Step 1: Press and hold the reset button on the side of the Sync Module until the LED blinks red.

Step 2: Release the button and wait for the LED to blink green and blue.

Read more : 5 Options for Recording a Security Camera All the Time for 24/7

Step 3: The Sync Module is now in set up mode. All cameras will now be offline.

Step 4: Delete the Sync Module from your Blink app.

How to reset the Blink Mini

The Blink Mini is a little different from the other cameras in the company’s lineup, as it doesn’t need to connect to a Sync Module. Instead, there’s a small reset button on the bottom side of the camera. You can use this button if your camera isn’t connecting to the internet or has other issues.

Step 1: Press and hold the reset button for 30 seconds.

Step 2: The camera should now be back at its factory defaults mode.

How to reconnect the Blink camera to Wi-Fi

Once you reset your system, you’ll have to reinstall the Sync Module to the Blink app to get it connected to Wi-Fi again. As detailed above, you can only reconfigure your system after resetting it and deleting it from the app.

Read more : How to Repot Your Outdoor Plants

Step 1: Open the Blink app.

Step 2: Tap the + sign.

Step 3: Select Blink Wireless System.

Step 4: Scan or enter the serial number of the Sync Module.

Step 5: Select your Blink system and tap Discover Devices.

Step 6: Tap Join and Done.

These are all the steps you’ll need to reset your Blink system if it has issues, shows that it’s offline, or if you’re selling it to a new owner. Remember that you should first power cycle the system before resetting if problems arise.

Editors’ Recommendations

• Is an Ecobee Smart Security subscription worth it?
• This is the single best early Black Friday home security camera deal
• Echo Pop vs. HomePod mini: which is the best smart speaker?
• You’ll be shocked how cheap this Roomba is ahead of Black Friday
• The best video doorbells for 2023

Source: https://gardencourte.com
Categories: Outdoor