How to Hang Outdoor String Lights Anywhere in a Backyard
6 simplified DIY tutorials for how to hang outdoor string lights without trees around a fire pit, around a pool, on a fence, on a porch, from siding, around a patio, or anywhere in the backyard.
I have no idea why it takes so much brain power to hang outdoor string lights (power… har har… electricity humor… I’ll see myself out).
You are watching: How to Hang Outdoor String Lights Anywhere in a Backyard
But if you’re new to this would-be simple backyard lighting DIY, it can be rather complicated.
It’s so hard to know all of the technical details when it comes to running a working circuit, rigging posts, brackets, and cables correctly, setting up convenient extension cords and timers while still making it look pretty.
Over the years though, Robert and I have done every single outdoor string light hanging scenario in our backyard that you can imagine, so I’m breaking down all of the steps for each one no matter what your situation is in your backyard.
There are all kinds of different string lights out there, and it’s hard to know which ones will work best for you.
In our experience, the best lights to use outdoors are shatterproof, soft white LED string lights.
You definitely don’t want glass bulbs shattering underfoot, especially where they can cause injuries. If you live in an area with windy conditions, this is especially important.
Soft white or warm white lights create that beautiful cozy glow to make a backyard feel inviting because they have a yellow/orange hue. (I prefer soft white at around 2700 K.)
Choosing daylight or cool white light bulbs isn’t ideal because they create the feeling of a cold, stark environment resulting in less-desirable conditions for relaxation.
It’s best to use LED bulbs rather than incandescent bulbs since they use less energy and are less likely to overheat.
For any situations where lights need to span long distances of 8 feet or longer, it’s best to use a string light cable kit to prevent the strands from sagging.
Note: Hang lights away from any water source to prevent code violations or safety hazards.
Some of the best places to hang outdoor string lights for added ambience in a backyard are:
You can hang lights from all kinds of objects in the backyard, and unless you have trees placed JUST in the perfect spot every time, you’ll most likely need some of these objects to rely on for support.
Check your backyard to see where your outlets are placed. Plan to hang lights with the starting end of your string lights near an outlet. (We placed our outlet access point directly behind our outdoor kitchen so it’s tucked out of the way but still convenient to access as needed.)
Plan where you want your lights to hang and measure the route with a tape measure to know how many strands you need to buy.
Choose a warm, sunny day to paint your conduit pipes (though this is entirely optional if you don’t mind the metal showing on the poles).
To make sure the spray paint sticks to the conduit, apply a thin, even coat of automotive primer. I’ve found over the years that it has the best adhesion on metal, especially in the elements in outdoor spaces.
Once dry from the primer coat, give the conduit pipes 1-2 thin coats of black spray paint.
As the paint is drying on the conduit, decide where you want to place your string light poles around the fire pit, mark, and begin digging 2 feet below the surface with a post hole digger.
Using a PVC cutter, segment the 10′ PVC pipe into 2′ length each to end up with five 2′ long PVC pipes.
Read more : Is Using a Hidden Spy Camera Illegal? A State-by-State Guide
Drop the 2′ length of PVC pipe into the newly dug hole. Use a level to make sure the PVC pipe is straight. Pack tight with dirt.
To give each pole a place to anchor the string lights, attach a squeeze connector to the top using 3M shelving tape to keep it secure.
Using the materials from the light hanging kit, make a loop in the cable and attach it to the squeeze connector. Pull the cable tight between poles as you repeat placement on the other string light poles.
Plan where you need to plug in your first strand of lights to a nearby power outlet and start hanging the first strand from the nearest conduit pole.
Attach the lights to the cable wire using the provided small zip ties in the string light kit.
Snip any excess zip tie ends.
To keep the plugs from pulling apart as the strands are placed tightly with tension on them, wrap the ends in black electrical tape.
Repeat the process until you have added lights all around your fire pit. Run the outdoor extension cord from the end of the string light strand down the pole and to the power outlet.
Set the timer as you would like or use the remote control manually if you don’t want to your string lights to turn on automatically every night at dusk.
Magic! Isn’t it so beautiful?!
It’s amazing how much they add to a fire pit!
I originally got this tubing idea from this string light tutorial from Maison de Pax, but I adapted it a little by adding hooks to the top of the poles and stringing cables for longer distances.
Follow her tutorial, if you want a less permanent, faster solution that spans shorter distances between light poles without the use of a cable system.
*If you’re planning to hang string lights near a pool, do NOT hang them directly over a pool. It is against code and a safety hazard. Instead, choose to hang string lights around the perimeter of a pool far enough away to avoid the risk of any electrical wires from falling into the water.
Apply a thin, even coat of automotive primer to the 1″ aluminum square tubing.
Once dry from the primer coat, apply 1-2 thin, even coats of spray paint.
Decide where you want to place your string lights to your fence, and attach the square tubing to fence posts using zip ties.
For a clean look, use the wire cutting pliers to snip the excess ends of the zip ties.
Using a 5/32 drill bit, drill a pilot hole through one side of the square tubing end. Screw in the hook until secure.
Walk around your property and decide where you want your string lights to attach to eaves, soffits, or sides of any nearby buildings, if any.
Use the brackets from the string light hanging kit and attach them to those points with a drill.
Using the cables from the string light kit, attach them to the brackets on buildings and hooks on tubings using the kit’s recommended hardware. Pull cables tight between end points so string lights don’t sag in the next step.
Plan where you need to plug in your string lights to a nearby power outlet and start hanging the first strand from the nearest bracket or tubing hook. Zip tie each string light bulb to the cable using the small ties from the kit. Use the wire cutting pliers to snip excess ends.
Read more : Where Do Cats Go When It Rains?
To prevent string light strand ends from pulling apart, wrap the plugs with black electrical tape. Repeat Steps 8 and 9 until you reach the end of your last cable with string lights.
Run the outdoor extension cord from the end of the string light strand down the pole and to the power outlet.
Set the timer as you would like or use the remote control manually if you don’t want to your string lights to turn on automatically every night at dusk.
You can see this post for more backyard lighting ideas like solar pendant lights and lanterns that we used all around our pool deck!
We used a similar method from above relying on part of our fence at the back of our yard for our DIY beer garden two years ago to hang string lights from trees.
Use a drill and 5/32 drill bit to start a pilot hole in the trunk of a tree. Screw in a hook until secure.
As you run your string lights, weave strands through limbs and wrap cords around branches. You can add more screw hooks into branches and tree trunks for added security to run more strands.
Because solar string lights don’t need to be plugged in, you have more flexibility where you’d like to place them in trees.
However, solar lights add more of a soft glow than fully functional light, so it’s difficult to rely on as your only light source.
This porch string lights method is SO simple and there is really just one step. Place the Command hooks where you want around the soffit of the porch. Be sure to follow the directions on the Command package
I clean the porch soffit surface with rubbing alcohol, press the adhesive strip on the hook firmly for 30 seconds, and press the hook onto the soffit firmly for 30 seconds. Let the hook set up without any weight of string lights on it for an hour. Then, hang your porch string lights as you wish from the hooks.
Use the extension cord if you need to connect the porch string lights to a power outlet. Set the timer, if you want the lights to turn on automatically at dusk each night.
This method is really straight forward too thanks to the use of vinyl siding clips.
Determine where you want to attach string lights to your siding and place the siding clips between siding slits.
Hang the string lights as you wish from the hooks, looping the strand once around the bend in the hook.
We had these hooks on our vinyl siding for a couple of years and were able to remove them without any damage at all! Despite many thunderstorms, the light strands never fell off.
We made these planter posts to hang string lights around our small outdoor patio at our old house. It worked perfectly!
Follow this tutorial to learn how to make planter posts for string lights as an alternative to digging posts into the ground (like in our fire pit string light tutorial).
If you are a renter or can’t hang string lights permanently, making planter posts is a great solution.
You can also plant citronella, lemongrass, and lavender in the planters to help keep mosquitos at bay.
In our old house on our small patio, we combined the use of these planter posts with vinyl siding clips.
There you have it! Just about every way of hanging string lights you can think of.
If you’ve ever felt stumped on hanging outdoor lights, I hope these tutorials helped! Let me know in the comments if you end up using any of these yourself.
Source: https://gardencourte.com
Categories: Outdoor
This post was last modified on 26/10/2023 02:26
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…