How To Strip Paint Off Kitchen Cabinets and Furniture Part 1 of 2

Let’s talk about how to strip paint off kitchen cabinets and furniture today, OK? How many times have you walked past a piece of furniture in a thrift store or garage sale and passed it up because it had a really bad paint job that was far too intimidating to tackle? Or was overwhelmed by the thought of a tough job like stripping layers and layers of paint off old cabinets, doors and hardware? You needn’t be. Overwhelmed or intimidated, that is:) With the right supplies and know-how, tackling projects like these can led to amazing results, not to mention huge savings over paying someone else do it for you! This is my complete guide, step by step process of how to strip paint off almost anything, kitchen cabinets, furniture, doors, trim molding and hardware.

Last week while I was in Dallas I decided to roll up my sleeves and tackle a huge project of stripping years of layered paint off vintage cabinets and prep them for a new paint job. I had 2 days to finish this project. I was SO unrealistic!

What’s more, I knew better.

I know what you’re thinking.. I said easy right?

Yes, most of the time it is easy and sometimes it’s tedious work. Those are the times when the job becomes much easier simply by having the best supplies ready to tackle the job:)

I’ve done my fair share of stripping paint projects.

I’ve stripped paint off our original 1950’s doors here in our project house in Fl.

Off furniture which was by far the easiest

..and kitchen cabinets with too many paint layers built up to get a good count on how many colors were used over the years.

Yuck!

How hard will it be to strip paint off of your project?

The simple answer is, it depends on how many layers of paint need to be stripped off, if your project has a lot of nooks and crannies and what your planning to do with your piece when your done. Paint or stain it.

Let’s start with the supply list for or how to strip paint off kitchen cabinets and furniture

This list of tools and supplies are what I recommend when preparing to strip paint off of cabinets, furniture or any other project. It may seem long, but it’s so much better to be prepared instead of up to your elbows in stripper and then realize you need one more item. Than put everything down and run to the store! – been there, done that 🙁

Stripper solution – I’ve tried different products before and by far the easiest and best smelling was Citristrip hands down.

Disposable dropcloth – Use a medium to heavy weight plastic disposable type. For larger jobs like kitchen cabinets, you’ll replace it often. purchase a roll like this with the tape attached. It’s lots more economical and easier to use. Don’t pinch pennies and purchase the really thin ones, it’s not worth the effort of cleaning up the mess because they’ve ripped.

Scrapers– Plastic putty knives and scrapers work best. Purchase a few because they will wear out on a larger job. Metal ones last longer, but they get caught in the wood and damage or ruin the surface. Why make extra work for yourself with wood filler repairs? If you’re planning on staining your wood later you won’t want any scratches on your surface anyway.

Wire brushes – A set of wire brushes in different sizes are perfect for cleaning out corners, trim, decorative woodwork and painted over hardware. Again, I purchased cheap ones. They can be cleaned in paint thinner or solvent, but getting all the gunk out of the brushes is a hassle. You’ll need a smaller one for a dresser or a door with trim and several sizes for larger jobs like a kitchen.

Solvent – You’ll need something to wipe the stripping residue off the wood when your done stripping. Odor free paint thinner works and is economical.

Scouring pads and or steel wool – You’ll use these with the solvent to remove the stripper residue.

Painters tape– to protect areas around cabinets and walls if you are working on something installed like a door frame or kitchen cabinets.

Clean rags– Have them handy to wipe the wood after using the solvent.

TSP (trisodium phosphate) – Wipe your wood down before staining or repainting to remove any last solvent, dirt or greasy residue. It’s also my favorite deglosser. I use this on every item I prep to paint. I buy the powder in the small box and it lasts forever. I keep a spray bottle mixed with a few tablespoons and water handy.

Eye protection – like these safety goggles. Especially when working on items taller than you like a door or cabinets! Mine saved my eye from a big glob of chemical mess on the kitchen cabinets project!

Read more : A DIY Guide to Removing Tile Floor

Chemical resistant gloves– to protect your hands. Use thick ones and if you’re working on a big job, have a few available. You’ll wear them out and potentially break through them.

Inexpensive paint brushes – I like to use cheap chip brushes, this set of 50 brushes for under $20 is a deal. For big jobs I use a 3″ and a 1″ for other jobs a 2″ and 1″ work fine.

Respirator or face mask – You don’t want to breathe in the chemicals and especially if you could be working with lead-based paint. Anything built/painted after 1978 is likely not to have lead based paint present, but you still need to protect yourself.

Protective clothing – If your project is vertical like a door or cabinets, you will get messy. So will your shoes. Wear shoe covers or use old shoes you won’t mind throwing away.

Tools– drill with screw driver to take off hinges and hardware.

Containers – to pour the stripper and solvent in and work from.

Step one: Planning

How to strip paint off kitchen cabinets and furniture

Depending on the size of the job and how many layers of paint there are, set enough time to realistically finish the project. I’ve stripped paint off a dresser in a few hours. Our interior vintage doors and trim took me an entire day per door because there were lots of grooves and layers of paint. My kitchen cabinet project will probably take me about 4 days by the time I’m finished, but I am also working on the bathroom cabinet and an old ironing board cubby at the same time.

Ideally, you should work outside and horizontally any time you can. Take doors down, cabinets and hinges off etc. Lay them across saw horses (I use these and they are strong) or anything at a comfortable working height. Otherwise your back will let you know it’s not happy!

Clear the work area of anything that could be damaged from the paint stripper.

Tape a dropcloth to the ground with painters tape all around the project area. If you are working on anything vertical like a door frame or cabinets, tape around the outside edges and tape a dropcloth onto anything else you need to protect. For big jobs with lots of paint layers, plan to change dropcloths often. Otherwise you may find yourself stepping in gobs of stripped off paint. I’d recommend layering a few dropcloths so it’s easy to roll the top one up containing the gooey mess and have a fresh one already taped in place if there are lots of paint layers to strip off. I used several drop cloths on the kitchen cabinet project. Stopping to unroll and re tape new ones was a pain. Next time I will layer them in advance!

This post contains a lot of information. Instead of sending you guys a novel on how to strip paint of kitchen cabinets and furniture, I’ll stop here and share the rest of this post in part 2 in a few days. I’ll be back in Dallas in the next two weeks to finish the vintage kitchen cabinet makeover and give them a fresh coat of paint. I’ll share the tutorial on painting kitchen cabinets in November when I’m caught up from the craziness of the last several weeks and my third trip back to Texas:)

Read How To Strip Paint Off Furniture And Cabinets part 2 here.

Do you have a project you’ve wanted to tackle and strip the paint off of in mind? This may be the perfect opportunity to gather the supplies and start planning!

Source: https://gardencourte.com
Categories: Kitchens