How to Install an Outdoor Electrical Outlet

An outdoor electrical outlet in your yard provides you with convenience and plenty of fun options. The ability to plug in outdoors can mean summer nights spent watching movies on a projector under the stars, a mini-fridge stocked full of cold drinks, and a holiday lights display that dazzles the neighborhood. Let your outdoor lighting ideas run wild.

An outdoor outlet also makes yard maintenance easier since it allows you to use plug-in yard tools without having to finagle a dozen different extension cords. Instead of tripping over multiple cords running from your home, consider installing a new outdoor outlet in your yard. Adding an electrical outlet is a simple installation process as long as you have an interior outlet or circuit that you can access and tap into. Just follow these guidelines, and you’ll have a handy outdoor electrical box in no time.

Choose where you want your outlet to go.

The easiest place to install an outdoor outlet box is on the other side of the wall from an interior outlet because an interior outlet provides a good place to tap into an electrical circuit in your home.

Avoid kitchen and bathroom circuits as well as any specialized circuits that power large appliances, like your washing machine and dryer, or home systems, like your air conditioning unit and heater. Most building codes prohibit you from using these sources since adding an outdoor outlet to these circuits can trip the circuit breaker.

When you decide where to put your outdoor outlet, it’s a good idea to use a voltage tester to make sure that the indoor outlet is working properly.

If you don’t have an interior outlet near the location you have in mind for your exterior outlet, that’s okay. One alternative is to tap into a basement junction box. To do so, first make sure that you’re using a living room, basement, or bedroom circuit. Then, you can drill through the rim joist and siding and run the cable through to the exterior wall, making sure to enclose the cables in a metal conduit.

Cut off your power.

Before you begin to install the electrical outlet, make sure that you turn off the power at your circuit breaker. After flipping the switch on your circuit breaker, use a voltage tester on the interior outlet or junction box to double-check that it is no longer live. If other people have access to your home, you should put a note on the circuit breaker so that someone else doesn’t turn the power back on while you’re tapping into the outlet.

Remove the indoor outlet.

Once you confirm that the indoor outlet no longer has power, it’s time to remove it from the wall.

1. Unscrew and remove its wall plate using a screwdriver.

2. Unscrew the outlet receptacle and pull it gently from the wall.

3. Disconnect the wires and then push them to the side and out of your way.

4. Read more : Is it Worth it to Buy an Outdoor TV?

   Check that the electrical box big enough to add outdoor electrical wires. If your electrical box is too full, it’s a fire risk, and you’ll need to find another spot for your outdoor electrical box.

Time to drill.

Then, follow these steps:

1. Find the knockout in the back of the electrical box and help it live up to its title: knock it out by tapping on it with your handy dandy screwdriver.

2. Then, use a stud finder to find exactly where your wall studs are located. Mark the location of your new outside electrical box by drilling through the wall using an 18-inch drill.

3. Ensure that you’re drilling in such a way that the new outdoor outlet will be in the same stud cavity as the indoor outlet. It’s a good idea to drill at a slight downward angle so that the new outlet will be positioned lower than the indoor outlet. This makes sure that the wall can house both electrical boxes without issue.

4. Now it’s time to drill a hole through the rim joist and right on through the wall.

5. Then, go out to your yard and check for the hole in your wall siding. If you want a recessed electrical box, place the outdoor outlet box up against the exterior wall, ensuring that the box will cover the drill hole masterpiece you just created. Trace the outline and then cut out the shape of the outline.

6. If you don’t care if your electrical box is recessed, all you have to do is drill a one-inch hole on the exterior wall around the hole you created from the interior wall.

Run your electrical outlet wiring.

Outlets typically use 12/2 wire and a 20-amp circuit, so ensure your new wiring cable fits this gauge and amperage. Then, do the following:

1. Pull the wiring cable through your exterior wall hole until there’s approximately a foot of cable pulled through.

2. Head back inside to use wire cutters to cut the cable. Leave about another foot of wire dangling from the interior electrical box.

3. Now for a move you’re familiar with: Knock out the knockout of your exterior electrical box with your screwdriver and push the outside cable through the outside electrical box. Depending on your finger dexterity, you might want to MacGyver a clothes hanger to help you reach into the hole to fish the wire through.

Rewire and install your outlet.

Wiring an outlet can sound intimidating, but it’s easier than you might think. On the interior wall, trim the end of the cable until you have about four inches remaining outside of the electrical box. Remove the cable covering and then strip off approximately 3/4 inch of insulation off the ends of each individual wire.

Read more : How To Keep Outdoor Curtains From Blowing In The Wind In 8 Different Ways

If the outlet had just one wire set running to it, all you have to do is reconnect them to their original ports. Using a ground wire connector, connect the ground wires to each other; then, connect the bare one directly to the outlet. If you have multiple sets of wires in the electrical box, you’ll make what’s colloquially called a pigtail connection.

Cut a new piece of cable that is about half a foot in length, remove the cover, and strip that insulation back about half an inch. There should be a black wire, a white wire, and a ground (green or copper/bare) wire.

Install your new outdoor outlet.

Once you’re fully wired—and not just from the thrill of completing installation—anchor your electrical box to the wall. Then, follow these steps:

1. Connect your pigtail wires to each color’s appropriate screw on the outdoor receptacle box: black to brass, white to silver, and ground to green.

2. Strip off about 3/4 inches of insulation from the other end of each pigtail and from the new wire you’ve pushed through the wall.

3. Using wire nuts, connect the three hot black wires to each other, the three neutral white wires to each other, and the three ground wires to each other. Push them carefully inside the electrical box and replace the interior outlet.

4. Install a new box on the exterior wall, ensuring it sits flush with the wall.

5. Attach a faceplate to your outdoor electrical box, protect it with a waterproof cover, and voila! The installation is complete.

Test and enjoy.

Turn the power back on, remembering to remove your note from the circuit breaker. Use a voltage tester at both interior and exterior outlets to make sure they work correctly.

Finally, enjoy having electricity outdoors with your new outdoor outlet box. Go ahead and install outdoor lighting and plug in your speakers. You’re ready to throw the backyard bash of your dreams.

Finally, consider signing up for an American Home Shield® home warranty to help protect your budget. We offer comprehensive coverage and flexible pricing and plans that work for any household and budget. We even offer electrical warranty coverage as part of what’s covered by a home warranty. Compare plans today and choose the best plan for your home.

Source: https://gardencourte.com
Categories: Outdoor