Categories: Kitchens

How to Identify A Faucet Brand

Published by

James marcus

1 year ago

Key Points

You might be interested

This post was updated on October 15, 2022
You can identify a faucet by brand, spline, stem length and/or shape

Table of Contents

You are watching: How to Identify A Faucet Brand

Introduction

Nothing is worse than finding a leak that causes thousands of dollars in damages.

You want to try to get ahead of the curve by documenting plumbing parts in advance but because your faucet is so old, you don’t know what to do.

Well, I have been in your exact situation so I wrote this post back in 2012 to hopefully help you in identifying mysterious shower and faucet parts.

One thing you do have to keep in mind is that not all attempts to identify your part will be successful.

But by following through steps and using a process of elimination should hopefully get you closer to the brand info.

^ Return to top

Common Plumbing Terminologies

It makes your life infinitely easier if you know some common terms when describing faucet parts.

This is especially true if you find yourself at a local plumbing supply store (kind of stores that deal with plumber, not the general public).

Three Types of Faucet Valves

There are four types of faucet valves used in a residential setting:

Compression Valve
Ball Valve
Cartridge Valve

Compression Valve Faucets

Compression method is the oldest form of valve so they are found in old houses.

Compression technique controls the water flow by pressing on or off against a rubber seal (i.e. O-ring). Because rubber deteriorates fast, this design is the primary contributor to leaking faucets

Ball Valve Faucets

Ball valves are used in single handle faucets, combining both hot and cold water.

A steel ball inside a ball valve contains a network of holes to channel water. It is a fairly complex setup requiring the use of springs and multiple washers and O-rings.

Cartridge Valve Faucets

Cartridge Valve is widely for residential faucets due to excellent performance characteristics.

The primary component is a small brass or plastic cylinder with grooves that channel the water flow.

An O-ring is located on the bottom (which will seat against the valve housing) to prevent leaks.

Cartridge valve can be found in single and double handle setups. When a leak develops, it is as simple as replacing the worn-out cartridge.

In ceramic disc cartridge valves, two ceramic discs slide against each other to control the opening hole in the center of two discs. It is said to be the most durable and long lasting but if used in hard water environment, these discs will accumulate minerals over a period of time.

^ Return to top

Identification Methods

When repairing an old faucet, it is critical to know the brand name and if possible, model number to find a correct replacement part(s).

There is no such thing as a generic replacement when it comes to faucets because many, if not all, manufacturers vary the length of stems, spline counts and cartridge shapes that makes each faucet unique.

Fortunately, there are several ways of identifying the faucet brands. Depending on the condition of your original faucet, you may have to use multiple methods to identify the correct parts:

Manufacturer logo or Model number
Spline (teeth) count on broach
Stem length
Cartridge length and shape

Manufacturer Logos

The quickest solution is to look for the manufacturer’s logo or name.

Name or model of a brand can be found pretty much anywhere so it is helpful to clean your faucet handles, escutcheon, spout, decorative rings, etc.

Information can also be found on the inside of a handle so make sure to thoroughly examine all parts under bright light (or flash light).

Some faucet manufacturers may include a model number but without a logo, this can be bit tricky to decipher, depending on the naming convention.

Teeth (spline) count

In older houses, it is common that you can’t find an identifying brand logo, name or model number on the faucet itself. In this case, you will need to remove the broken part.

You most likely will be able to obtain the correct replacements parts by first removing the faucet stem and count the number of splines on its broach. Also, measure the length of the stem from top to bottom.

The broach is atop the faucet stem, resembling a shape of a small-toothed gear. The purpose of the gear’s splines is to fit inside the female end of a faucet handle to control the opening and closing of faucet valve

Using this method, you can narrow down the choice to a few possibilities.

4 point square broach – Milwaukee, Royal Brass, Speakman, Sterling, American standard, Chicago, Concinnity, Gerber, Price Pfister, Symmons, Zurn
8 point broach – Briggs
12 point .335″ broach – Crane Dialeze, Michigan Brass, Wolverine.
12 point .375″ broach – Arrowhead, Artistic Brass, Harcraft, Glauber, Price Pfister, Scoville, Universal Brass.
12 point .39″ broach – Bradley, Elkay, Fisher, Sears, Universal Rundle.
12 point .415″ broach – Symmons.
12 point .485″ broach – Crane, Symmons.
15 point broach – Santec, Savoy, Wolverine.
16 point .360″ broach – Gerber, Sayco.
16 point .370″ broach – Acme, American Standard Cadet & Colony, Barnes, Burlington, Central Brass, Concinnity, Eljer, Glauber, Harden, Kohler Trand, Milwaukee, Newport, Phylrich, Royal Brass, Scoville.
16 point .40″ broach – Sterling.
17 point broach – American Brass, Mansfield, Midcor, Phoenix, Streamway.
18 point broach – Briggs, Indiana Brass, Union Brass.
20 point .285″ broach – Broadway, Concinnity, Danfoss, Dornbracht, Eljer, Grohe, Jado, Kohler, Milwaukee, Paul.
20 point .415″ broach – Broadway, Speakman, T & S Brass.
22 point .375″ broach – American Standard old 3/8″.
22 point .438″ broach – American Standard current 7/16″.
38 point broach – Import, Pegasus, Glacier Bay.
D Broach – Delta, Milwaukee, Universal Rundle, Valley.
Oval Broach – Delta, Moen, Mixet.

Manufacturer Contacts

Acorn
Altmans – http://www.altmansproducts.com/ ; 800-678-6463
American Brass – http://www.americanbrass.com/ ; 800-431-6440
American Kitchen
American Standard – http://www.americanstandard-us.com/ ; 800-442-1902
Aqua Brass – http://www.aquabrass.com/
Arrowhead
Artistic Brass – Out of production, parts are available; 800-251-2390
Barnes
Blanco – http://www.blancoamerica.com/ ; 888-668-6201
Bradley Cole
Brasscraft – generic replacement part manufacturer
Briggs – http://www.briggsplumbing.com/
Broadway Collection – 800-449-9180
California Brass
Central Brass – http://www.centralbrass.com/ ->pioneerind.com
CHG (Component Hardware Group) – http://www.saniguard-online.com/ ; 800-526-3694
Chicago – http://www.chicagofaucets.com/ ; 708-803-5000
Coast – http://www.coastfoundrymfg.com/
Crane – http://www.craneplumbing.com/
Danco – generic replacement part manufacturer
Danze Globe Union American Corp. – Tech Support 1-888-328-2383 ; [email protected]
Delta/Delex – http://www.deltafaucet.com/ ; 800-345-DELTA (3358)
Dick Brothers – vintage;
Dornbrach – http://www.dornbracht.com/
Eljer – http://www.eljer.com/
Elkay – http://www.elkayusa.com/
FEBCO – http://www.febcoonline.com/
Fisher – http://www.fisher-mfg.com/
Franke – www.frankeksd.com/
Gerber – http://www.gerberonline.com/ ; Technical Support: 888-648-6466; Customer Service: 866-538-5536
Glacier Bay (Home Depot house brand) – customer Support (336) 945-5580
Glauber – vintage;
Grohe – http://www.groheamerica.com/ ; 630-582-7711
Hans Grohe – http://www.hansgrohe-usa.com/
Harcraft
Harden
Huntington Brass – http://huntingtonbrass.com ; 800-888-6604
Indian Brass
Jado – http://www.jadousa.com/ ; 800-227-2734
Kohler – http://www.kohler.com/ ; 800-456-4537 or 920-457-4441
Lasco – generic replacement part manufacturer
Lefroy Brooks – http://www.lefroybrooks.com/
Leonard
Master Plumber
Masco
Midcor
Michigan Brass
Michigan Princess
Milwaukee
Moen – http://www.moen.com/ ; 800-Buy-Moen (1-800-289-6636)
Muller
Newport Brass – http://www.brasstech.com/
Nibco – http://www.nibco.com/
Peerless – http://www.peerless-faucet.com/repair.htm ; 317-848-1812
Pegasus – 888-328-2383
Perlick Corp.
Phoenix Faucets – http://phoenixfaucets.com/
Phylrich – http://www.phylrich.com/
Powers – http://www.powerscontrols.com/
Price Pfister – http://www.pricepfister.com/ ; 800-732-8238
Pubco
Queen City
Royal Brass
Savoy
Sayco – http://briggsplumbing.com/sayco-faucets
Scoville
Sepco
Sign of the Crab – http://www.signofthecrab.com/
Sloan – http://www.sloanvalve.com/
Speakman – http://www.speakmancompany.com/ ; (800) 537-2107
Sphinx
Steamway
Sterling – http://www.sterlingplumbing.com/ ; 800- STERLING (783-7546)
Sterling Brass
Symmons – http://www.symmons.com/products/products.html
Sysco
T & S Brass – http://www.tsbrass.com/
Union Brass
Universal Rundle
Valley – http://www.zurn.com/valley/Valley.htm
Waterworks – http://www.waterworks.com/
Watts – http://www.watts.com/
West Brass
Wolverine – http://www.wolverinebrass.com/
Zurn – http://www.zurn.com/

^ Return to top

Tips to Keep in Mind

When you are thinking about replacing a faucet cartridge, I suggest you replacing both at the same time
Faucet cartridges last a long time; less durable if live in an area with hard water (due to mineral build-up)
If you are able to locate a similar part but the spline count does not match, you may also want to consider swapping out the handles.

Still Can’t Figure Out What You Have?

Option # 1 – Visit TerryLove.com (https://terrylove.com/forums/index.php?forums/shower-bathtub-forum-blog.5/) and ask with your photo. Terrific community of folks who are really helpful
Option # 2 – Visit Ferguson Repair Parts (https://www.fergusonrepairparts.com/category/stems-cartridges/filter:/) Just a warning that it can be overwhelming but has a nifty filtering feature on the left side. You will need few hours set aside to filter and browse for your replacement part
Option # 3 – Visit your local plumbing supply store (that are frequented by plumbers) with your old part.
Option # 4 – Visit plumbing supply online stores. Some have a section to submit your parts question and allows you to submit photo for identification

Where to Buy Your Replacement Faucet Parts

I would search for a plumbing supply store frequented by your local plumbers
Remember that a some plumbing supply stores may only deal with one or two brands so you may have to visit different stores.

Summary

It can be a huge pain in the butt trying to find the right replacement part for your faucet setup.

I hope I provided you with enough information to at least get you started in the right direction.

If you found this article to be helpful, would you please do me a favor and sign up for my newsletter? The signup form is found on the upper right corner of the page.

Thanks and good luck with your project!

^ Return to top

Reference Links

Source: https://gardencourte.com
Categories: Kitchens

James marcus

Garden Courte is a blog written by [James Marcus], a passionate gardener and writer. She has been gardening for over 20 years and has a deep understanding of plants and how to care for them. In her blog, she shares her knowledge and experience with others, providing tips and advice on gardening, plant care, and more.