Categories: Outdoor

Bud Industries Blog

Published by
James marcus

It is often confusing for an engineer to know what type of IP Rating they need to look for when they desire to have a “waterproof” enclosure. Much like with watches or other sensitive information, there is a big difference between waterproof, water-resistant, and other descriptive but not specific labels. To help out, there are several rating systems that have been developed and several testing agencies that verify the results. Among these, the two best known are NEMA and IP. This article will deal only with the IP system.

What is an IP Rating?

An IP Rating (Ingress Protection Rating) is the rating used to classify the different levels of sealing effectiveness provided by an electrical enclosure against foreign bodies such as objects, water, dirt, etc.

IP Rating Chart

For enclosures, the typical waterproof IP ratings are IP67, IP66, and IP65 enclosures. The chart below gives the specifics of what these ratings mean and how they are measured.

IP RatingProtectionDescriptionTest MethodIP65 EnclosuresAble to protect against water jetsWater projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects.Test duration: at least 15 minutesWater volume: 12.5 litres per minutePressure: 30 kPa at distance of 3 mIP66 EnclosuresAble to protect against powerful water jetsWater projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects.Test duration: at least 3 minutesWater volume: 100 litres per minutePressure: 100 kPa at distance of 3 mIP67 EnclosuresAble to protect against Immersion up to 1 mIngress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion).Test duration: 30 minutesImmersion at depth of at least 1 m measured at bottom of device, and at least 15 cm measured at top of device

IP ratings, or ingress protection, were developed by the IEC (International Electrotechnical Commission) and are most heavily used in Europe and Asia, with some adherents in North America as well. Since these are international standards, the testing is often certified by the TUV instead of UL, although both provide stringent testing. One area to note is that while these are developed to deal with harsh environments, they do not address UV protection standards (outdoor) and the engineer should look for or ask about the ability of the enclosure to include UV protection materials.

The IEC isn’t the only standards-making body, of course. NEMA is the National Electrical Manufacturers Association. Its protection ratings are the North American version of IP ratings. For example, NEMA 3 is roughly equivalent to IP45, and NEMA 4 is roughly equivalent to IP66. The standards are similar, but they don’t match up exactly, because the test requirements are different. If your design will be used in North America, then NEMA ratings will do just fine, and they may even be requested by the end customer. In another blog post, “Rating NEMA boxes versus IP boxes,” I discuss NEMA ratings and how they relate to the IP standard.

IP Ratings for Types of Enclosures and Uses

In applying IP protection ratings to a particular application, the design engineer must consider the end-use environment. The examples below offer guidance in selecting an enclosure with the ideal rating.

Outdoor applications:

Enclosures for Building Automation

Small plastic boxes installed on buildings and light poles and used to house electronics for access control, video surveillance systems, alarms, and wi-fi systems. IP66 is a typical rating for this applications, as with Bud’s HD Series plastic box.

Enclosures used to house electrical equipment outdoors should have at least an IP65 rating, like the Bud NF Series fiberglass enclosure.

Enclosures for Agricultural Equipment

Die-cast aluminum boxes, plastic boxes, and fiberglass boxes that house controls for equipment incorporated into agricultural equipment. As farming continues to go high-tech, more electronics are being added. An enclosure on an irrigation system, for example, may be specified at IP67 or IP68 (for temporary submersion in water.) The PTQ Series fiberglass box and the AN-A aluminum enclosure are good examples.

Enclosures for Renewable Energy

Die-cast aluminum boxes used to house control components in solar and other renewable energy applications. Typically, the choice is an IP67 enclosure like the IPS Series aluminum enclosure.

Enclosures for Marine Applications

Heavy-duty plastic boxes and powder-coated die-cast aluminum boxes are widely used in marine applications. These settings include ports, docks, marinas, and ships. Choose enclosures having a IP68 rating, such as the DPH Series.

Indoor applications:

Enclosures for Factory Automation

Any enclosure (made of plastic, fiberglass, aluminum, or steel) used to house automation components and controls on the factory floor. IP65 is usually preferred because that rating will protect from washdown and the designer cannot predict the end-use location. A good example is the Bud NBB Series.

Electrical Cabinets and Junction Boxes

Electrical Cabinets and Junction Boxes that house electrical equipment indoors are usually specified to IP65, such as the SN Series steel box, although an IP45 rating is probably all that is needed if there will be no washdowns. If electronics are going to be installed inside the enclosure, then these may be housed in IP66 enclosures, which are sealed against dust and moisture. This includes DIN-rail mounting enclosures like the DMX Series.

These examples are only the most common applications and again, do not address the levels of UV protection for outdoor applications Often we are surprised at the places where Bud enclosures end up, from stadiums to the space program. If you are unsure about the best IP rating for your application, talk with a Bud sales consultant.

This post was last modified on 25/10/2023 20:59

James marcus

Garden Courte is a blog written by [James Marcus], a passionate gardener and writer. She has been gardening for over 20 years and has a deep understanding of plants and how to care for them. In her blog, she shares her knowledge and experience with others, providing tips and advice on gardening, plant care, and more.

Share
Published by
James marcus

Recent Posts

DIY Turmeric Scrub for Hyperpigmentation

For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…

11 months ago

Top 15 Cook Interview Questions and Answers

Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…

11 months ago

What Color Walls Go With Grey Kitchen Cabinets [Schemes]

Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…

11 months ago

10×10 Kitchen Remodel Cost: Everything You Need to Know

Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…

11 months ago

How Much Do Quartz Countertops Cost?

Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…

11 months ago

Australian IKEA Kitchen Design & Installation Costs

IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…

11 months ago