How to sharpen a knife?

Sharpening steels

Sharpening steels are steel shaped sharpening stones, intended to sharpen your knife in a few easy movements. There are different types of sharpening steels.

Ceramic steel:

The most common sharpening steels are made of ceramic material. A ceramic sharpening steel is ideal to keep your knife sharp. This is fast and easy. However, it’s very important to use this steel regularly, to prevent the knife from going blunt.

You are watching: How to sharpen a knife?

Diamond sharpening steel:

Read more : 9 Simple Steps to Sparkling Clean Rangehood Filters

Besides ceramic steels, there are also grinding steel that have a layer of diamond. The hard diamond grains ensure that you can quickly regrind your knives. Compared to a ceramic steel, the result slightly less refined. A disadvantage of a diamond steel is that over time the diamond grains may break out or crumble off, which causes the steel to lose it’s sharpening quality.

Sharpening steels are especially suitable for (small) maintenance of knives. For sharpening dull blades, it is advisable to use a sharpening stone or sharpening machine. Besides the above, we have the honing steel: it is important not to confuse sharpening steels with honing steels.

Pull through sharpeners (knife sharpeners)

Read more : Kitchen Island Height – Bar Height or Counter Height?

If you don’t want to learn the skill of sharpening on a stone, a pull through sharpener may be a good option. The pull through sharpener consists of one or more smalle grinding wheels with a fine or coarse grit. In order to sharpen the knife you pull the knife several times through the grinding wheels without really pushing. The results of this shaprening method are of lower quality than sharpening rods and stones. The result is a relatively jagged edge, and the sharpness is of short duration. To get really sharp knives, it is therefore advisable to use one or more sharpening stones. The fast and somewhat rough treatment of a pull through sharpener is, in particular for harder steels, not recommended. A good knife actually deserves a more sophisticated sharpening method, such as sharpening on a stone.

Electric sharpening

For the cooking enthusiast without sharpening experience, an electric sharpener could be a great help. The electric sharpening machine has one or more slots with different types of sharpening wheels. The slots are already in a fixed grinding angle, providing a fixed, reliable edge. This benefit can also be a disadvantage, since European knives are sharpened under a different angle than Japanese knives. By pulling the knife through the slots one by one, it will be thoroughly sharpened. The electric sharpeners are pretty easy to use and deliver a good result. However, a sharpening turn removes significantly more material from the blade then with the use of a sharpening stone. This means that your knife will end up with a shorter life span if you use the electric sharpener regularly. For pocket knives, we do not advise to use an electric sharpening machine. This is because the machine removes quite a lot of material and pocket knives generally already have a thin blade.

Guided sharpening systems

Guided sharpening systems use a holder where you secure your knife, one or several sharpening sticks or conductors. Through the use of the holder, it is easy to select the right angle for sharpening. When using a guided sharpening system, there are two ways to sharpen your knife: a. Sharpening sticks are placed in the holder, after which you pull the knife along the different sharpening sticks, in order to sharpen it. b. The knife is secured in the holder, after which you pull the sharpening sticks along the blade. There are various systems for sale with a sharpening stone grinding the knife under a adjustable angle. The advantage is that you have a nice straight cutting edge. Disadvantage of this method is that it takes more time than grinding on a regular sharpening stone. Moreover, by sharpening with a fixed angle, you are much less flexible. So if you don’t want to sharpen the knife in ze pre-fixed angle, you will still have to do it manually. The guided sharpening systems are highly recommendable for sharpening expensive pocket knives, because they provide a very nice cutting edge. By pasting the blade with adhesive tape, you can prevent any scratches caused by the clamping system. For kitchen knives, it is advisable to use a sharpening stone or electric grinder.

Source: https://gardencourte.com
Categories: Kitchens