Are you the owner of a Blink Outdoor Camera with a red light flashing inexplicably? You’re not alone. We understand that few things are more frustrating than a product that doesn’t work like it’s supposed to. This goes for your Blink Outdoor Camera and its strange flashing light. Why is it flashing? What does the flashing mean? Most importantly, how do you make it stop? Let’s explain the meaning behind a red light flashing on a Blink Outdoor Camera. Then, we’ll troubleshoot some solutions that should hopefully make things right again.
Blink Outdoor Cameras use a red flashing light for a variety of specific purposes. Think of the red flashing light as a visual indicator, almost like a signal. It’s trying to communicate information to you about its current state. Across the board, all these flashes mean just one thing: the camera needs your attention to fix a problem currently keeping it from doing its job.
You are watching: Blink Outdoor Camera Has a Red Light Flashing? Here’s What to Do
From network connectivity issues to depleted battery levels and beyond, the primary reason for a red flashing light on your Blink Outdoor Camera is to alert you. It’s not just this particular Blink product that flashes red, either. Blink Indoor Cameras, Blink Video Doorbells, and numerous other Blink products display red lights in their times of need.
Overall, the red flashing light on Blink Outdoor Cameras is a multi-purpose tool designed to communicate crucial information to you as the user. Don’t ignore these alerts, as they likely mean your camera isn’t able to record. Imagine if something were to happen on your premises that the camera was unable to capture. This is the worst-case scenario for any home security system. That’s why it’s so important to know how to stop the problem.
Read more : 20 Fun And Simple Outdoor Activities For Babies
There are four main reasons why a red light would flash on a Blink Outdoor Camera: a failed setup, a faulty network, an active recording, or a dead battery. Let’s explore each of these four problems below and explain how to resolve them. If your Blink Outdoor Camera still has a red light flashing after trying these four solutions, we have a few other things you can try next.
You could be seeing a red light flashing on your Blink Outdoor Camera because you haven’t finished setting up the device. This means your camera is in the middle of setting up, but the process hasn’t been fully completed yet. Try restarting the camera by removing the batteries and putting them back in. Then, try to complete the setup and see if the red light stops flashing upon completion. If the issue continues, you may need to try one of the other possible solutions below.
The red light flashing on your Blink Outdoor Camera may be due to a network issue. To make it stop, you should first check your Wi-Fi connection. Make sure your router is working and that other devices can connect to it. If that’s not the problem, try restarting both your camera and router. Furthermore, ensure the camera is within the router’s range and that it’s putting out a strong signal. If the red light persists, consider moving the camera closer to the router or using a Wi-Fi extender. Also, avoid physical obstructions between the camera and the router.
Blink Outdoor Cameras flash a red light when the device is in the middle of a recording. To stop the red light from flashing, you’ll need to stop the recording in progress. Open the Blink app and locate the camera feed. If it’s recording, you’ll see a pop-up at the bottom of the screen telling you so. Disarm the camera to stop the recording. This should stop the camera from recording, effectively putting an end to the flashing red light. Just remember to arm the camera again if you want it to resume recording.
If all else has failed, you may be dealing with something as simple as a dead battery. This is probably the easiest way to stop a red light flashing on a Blink Outdoor Camera; swap out the dead batteries for new ones. Blink cameras have impressively long battery life, but there will inevitably come a time when they need to be replaced. Remove the camera from its mounting, open the battery compartment, and replace the old batteries with fresh ones. Then, close the battery compartment, re-mount the camera, and wait for the red light to turn off.
Read more : Kem Dưỡng Da Chống Lão Hóa Ban Đêm Filler Vegetal Anti-Wrinkles Plumping Night Care Pot 50Ml
Sometimes, the Blink Outdoor Camera has a red light flashing for some other (much more complicated) reason. Fear not, though; we know how to help you fix these problems, too. Let’s talk about how to check your router, contact customer service, or replace your Blink camera altogether. With luck, the red light will finally stop flashing.
Already checked your Wi-Fi connection and everything looked good? You may be getting a red light flashing on your Blink Outdoor Camera due to an issue between the router and the Internet. The device could be communicating with the router just fine, but if the router can’t connect to the Internet… that’s a problem. Try unplugging your router and plugging it back in after ten seconds. This should hopefully reset your router and re-establish a connection from the Internet to the router to your Blink Outdoor Camera.
If you’ve tried everything so far and are still stuck with a flashing red light, it might be a good idea to reach out to Blink’s customer service. They’re the true experts when it comes to solving these camera issues. They have certain tips and tricks only they could suggest with their insider knowledge. Visit their official website to find their contact information, then explain the problem you’re facing and the steps you’ve already taken to troubleshoot. They will guide you through more advanced solutions to stop that pesky red light from flashing.
Red light still flashing on your Blink Outdoor Camera, even after all these tips and tricks above? Unless the warranty still covers your camera, you may be better off getting an entirely new Blink Outdoor Camera. If your warranty lapsed and you’re absolutely positive this flashing red light can’t be fixed, then a replacement should definitely put a stop to things. To be clear, this should be your very last resort. More often than not, a red light flashing on a Blink Outdoor Camera can be fixed in a matter of minutes. But, in those rare exceptions, a full-on replacement is a final solution.
The image featured at the top of this post is ©Bandersnatch/Shutterstock.com.
Source: https://gardencourte.com
Categories: Outdoor
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…