Categories: Kitchens

How To Reface Kitchen Cabinets : Affordable Cabinet Update

Published by
James marcus

Learn how to reface your kitchen cabinets for a budget-friendly upgrade. Give old kitchen cabinets brand new life with this full detailed tutorial and video.

PIN THIS TO PINTEREST

So, you aren’t a big fan of your kitchen cabinets?

I am sure, if you could, you would simply pull them out and add brand new ones.

Unfortunately, kitchen remodels can get expensive real fast!

Do you know the #1 reason for that?

Cabinets.

They are the most expensive part of any kitchen remodel.

When we first got quotes for the kitchen remodel, the majority of the $$$ were going towards new cabinets!

One quote was for $50K and $35K of that was for cabinets! Insane!

Do you know – instead of spending money ripping out perfectly good cabinets, you can easily replace the cabinet doors and completely upgrade the look of the entire kitchen!

***This post is sponsored by Nieu Cabinet Doors. Thank you for supporting the brands that help me bring you new projects***

To recap, this is what my kitchen started out as.

You can check out more before pictures and the mood board here.

I had maple veneered cabinets.

At the time of writing this,

  • we added new off-the-shelf cabinets to extend the countertops and create more counter space.
  • Added new countertops.
  • changed the flooring

It was time to change the color of the cabinets to give the entire kitchen new life!

What is cabinet refacing?

Cabinet refacing means giving old cabinets a “new face“. It involves three basic steps:

  1. Removing the old doors and drawers
  2. Giving the existing frame a new look with either paint or veneer.
  3. Adding all-new replacement doors and drawers for a completely updated custom look.

Cabinet refacing is a great way to save time and most importantly – money.

There are multiple ways you can ass new life to existing cabinet face frames –

  • Applying veneer trimmings
  • Painting it.

I decided to go with painting.

Then came the decision – to make the cabinet doors or not.

After years of building furniture, I am perfectly capable of building the doors but there were 33 doors and drawer fronts!

That is way more than I had the time or patience for – and it would have taken me weeks to make them all.

You can easily find vendors that manufacture cabinet doors to your specifications.

Where to buy cabinet doors

During my search to find a place that makes cabinet doors, I found Nieu Cabinet Doors.

They manufacture cabinet doors in a multitude of styles and colors. They are made of MDF and are of excellent quality.

I started by ordering a sample kit that came with a mini door in the style of my choice and a set of MDF color swatches. The sample is very reasonable at $25.

Once you make your selection and place the order, they ship everything right to your doorstep ready to be installed.

  • You remove old doors.
  • Paint the cabinet frames
  • Install new doors.

Not comfortable with installing it yourself?

If you feel that installing new cabinet doors is a bit above your DIY level, you can still look into ordering them, and then hiring a local contractor to install them.

You will still save a ton of money over buying all new cabinets.

However, if you are ready to get your hands dirty and get it done yourself, I have you covered.

Here are all the details you need to know to install them.

Spoiler – it’s not that hard!

PIN THIS TO PINTEREST

How to order new cabinet doors

The process of ordering is very straightforward.

Nieu Cabinet Doors have a lot of resources online including a style quiz to help you figure out exactly what and how to order.

The basic steps are:

  • Choose the door style. I got the Shaker doors.
  • Pick your color. All the colors are Sherwin-Williams colors so you can easily paint the cabinet boxes to match.
  • Measure pre-existing cabinet doors and drawer fronts and enter the dimensions on the website. They have detailed how-to videos for every cabinet style to guide you.
  • You can then select many other options like :
    • bores for the hinges
    • drawer boxes
    • drawer slides, etc.

Note – If you need a different color than what is offered in the catalog, you can order any Sherwin Williams paint color for a small additional fee.

That’s it!

Now you can start painting the cabinet boxes while you wait for your doors to arrive.

Video Tutorial

I have a full video tutorial showing you step-by-step how to reface the laminate and unfinished wood cabinets PLUS a detailed tutorial of how to install the doors and drawer fronts from Nieu Cabinet Doors.

How to paint cabinets

I had two types of cabinets in my kitchen and they each needed a slightly different preparation method.

  • The new unfinished wood cabinets – These could be primed to seal the wood and then painted
  • The old laminate cabinets – The laminate needed to be deglossed and roughed up before priming and painting.

Step 1 – Prep

As with any project, prep is the most important. If you do not prepare the cabinets well, the results will be inferior.

It can feel like a long process but take your time and make sure you don’t skip any steps.

  • Remove all the doors and drawers. Be sure to label them so you know exactly where they go when it is time to put the corresponding doors back.
  • Clean all the dirt and grime off of the old cabinets with denatured alcohol or a TSP solution using some shop rags and rinse with sponge and clean water.
  • Use liquid sandpaper to remove the gloss from cabinets if they have an old finish. Liquid sandpaper needs to be left to dry for 5 minutes for it to work effectively. You can also sand but I prefer creating as little dust as possible.
  • Tape off the walls, floor, appliances, and around the cabinets.
  • Fill in the old hinge holes with wood putty using a utility knife. We will not be using these. We will use new holes for the best strength.

PIN THIS TO PINTEREST

Step 2 – Primer

The primer you use will depend on the type of cabinets. For the unfinished wood cabinet, a wood sealing primer works well.

For the laminate, I used SW extreme bond primer which sticks well to any surface. This is important, especially on laminate or veneer. If not properly primed, the paint will eventually peel off.

  • Using a brush, cut in on the edges and use the roller to roll on the primer on the cabinet face frame.
  • Once the first coat is dried, lightly sand to smooth the coat. In case of the unfinished wood, it may need a little more elbow grease to knock down the raised grain.
  • Apply a second coat of primer.

Step 3 – Paint

  • Paint by cutting in along the edges and rolling in the paint.
  • Paint additional coats as needed. I needed a total of 3 coats to get the best coverage and rich color.

That’s it! The cabinet boxes are painted!

Pro-tip – Be sure to remove the painter’s tape before the paint dries!

Once the paint has dried and cured, you can go ahead and attach the doors and the drawer fronts.

Installing new cabinet doors

All you need to install new cabinet doors is:

  • Drill
  • hinges
  • A straight edge like a strip of plywood or a level.
  • A small clamp.

I got my cabinet doors with hinge bores and re-used my old soft close hinges.

For tips and tricks on how to install the doors and drawer fronts, be sure to watch the video.

IMPORTANT – Do not re-use the screw holes in the cabinet frame for the hinges. Nieu Cabinet Doors automatically offsets the hinges to avoid this but you can let them know depending on your situation where you would like the hinge bores.

Lazy Susan cabinet – I have a Lazy Susan corner cabinet. Nieu Cabinet doors were able to easily send me doors to assemble my corner cabinet door.

The hardware brought everything to life! These are the Fransisco pulls in Champagne Brass. I got a combination of 3″, 4″ and 5″ pulls for different sized cabinets and drawers.

Installing drawer fronts

Installing the drawer fronts is super easy :

  • Make the holes for the drawer pulls
  • Use those holes to attach temporary screws
  • Add permanent screws from the inside.
  • Remove temporary screws and add the drawer pulls.

They attach with screws from the inside. I explain exactly how to do that and make sure the faces are aligned in the video.

One side of the kitchen is done!

PIN THIS TO PINTEREST

For comparison, this is what it looked like when we started. Yes, it didn’t exist!

I have one more major project to go and then a bunch of small touch-ups before I can call this kitchen done!

I leave you with a gorgeous view of the cabients!

Check out the full reveal here!

Other projects in this kitchen

  • DIY Wood Slat Island Trim
  • How to install backsplash without mortar
  • How to install vinyl plank flooring

You might also like

  • How to stain cabinets using gel stain
  • Small bathroom remodel on a budget
  • Master bedroom makeover with board and batten
  • How to Make Shaker Cabinet Doors – A Simple Tutorial

James marcus

Garden Courte is a blog written by [James Marcus], a passionate gardener and writer. She has been gardening for over 20 years and has a deep understanding of plants and how to care for them. In her blog, she shares her knowledge and experience with others, providing tips and advice on gardening, plant care, and more.

Share
Published by
James marcus

Recent Posts

DIY Turmeric Scrub for Hyperpigmentation

For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…

1 year ago

Top 15 Cook Interview Questions and Answers

Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…

1 year ago

What Color Walls Go With Grey Kitchen Cabinets [Schemes]

Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…

1 year ago

10×10 Kitchen Remodel Cost: Everything You Need to Know

Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…

1 year ago

How Much Do Quartz Countertops Cost?

Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…

1 year ago

Australian IKEA Kitchen Design & Installation Costs

IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…

1 year ago