Categories: Kitchens

How To Remove Kitchen Faucet Handle Without Screws

Published by
James marcus

Are you having problems with your kitchen faucet? Maybe you need to change a malfunctioning faucet cartridge or filter. Or you want to check for a leak or clean the inside of your faucet.

To fix any of these issues, you’ll need to remove the handle. Taking off a faucet handle without a screw can be challenging, especially if you’ve never done it before.

But you don’t need to hire a plumber to handle the task for you. With a few readily available tools and simple instructions, even a novice can remove a kitchen faucet handle with no visible screws.

How Do You Unscrew a Faucet Handle?

If you search online for “how to remove faucet handle no screw,” you’ll discover several ways to perform this task.

We’ll share one of the simplest and most effective methods. You’ll need a few tools for this procedure:

  • A pair of pliers
  • Flat-head screwdriver
  • A piece of cloth
  • Allen wrench
  • Adjustable wrench
  • A handle puller set
  • Distilled white vinegar

Once you find the necessary tools, you’ll need to follow these steps to remove the screwless faucet handle successfully.

Step 1: Turn off the water

Regardless of the type of faucet you have, the first step in removing the handle is to shut off the water supply line valves to the faucet. You can do that by turning off the two shutoff valves found underneath the sink. Or you can shut off the main water supply to your home.

You close the shut off valves by turning the handles clockwise until they cannot turn any further. After closing the shutoff valves, turn the faucet handles to see if any water flows.

By turning the faucet handles, you allow the faucet to drain any remaining water in the system and release any pressure trapped in the line.

If water still trickles after you have closed the shutoff valves, they could be worn out or malfunctioning. Worn valves mean you’ll also want to consider replacing your shutoff valves when you replace your faucet.

Step 2: Remove the cap on top of your faucet

After shutting off the water supply to your faucet, the next step is to remove its cap. It is worth noting that some kitchen faucets don’t come with caps. If yours has a cap, then this step is essential.

You can remove the cap by prying it off with a flat-head screwdriver. The cap is often on the top of the faucet handle. However, the cap of some faucets is on the side. After you remove the cap, you’ll find a invisible set screw underneath.

Step 3: Remove the hidden set crew

Before you remove the set screw, cover the drain to avoid losing the faucet screw if you drop it into the sink. If you lose the screw, you won’t be able to tighten your kitchen faucet handle.

Using a spanner or Allen wrench, remove the set screw.

Step 4: Remove the faucet handle

After you remove the screw, you need to pull off the handle gently. You’ll need a faucet handle puller or pair of pliers for this task.

Before you remove the handle, wrap the bottom with an old piece of cloth to avoid scratching your tap. You don’t want the tap to lose its sleek look and make your faucet look old.

Step 5: Rinse off mineral deposits

Using distilled white vinegar, remove any mineral deposits that may have accumulated on your faucet, which will make it inefficient. Inspect your faucet for any faults. If the faucet cartridge is broken, you’ll need to replace it.

Replacing a faucet cartridge is generally straightforward, and new cartridges are readily available at most plumbing supply stores, hardware stores, and home centers. Keep in mind that there are many brands and styles of faucet parts, so take the faulty part along to ensure you buy a perfect match.

The procedure for faucet cartridge replacement includes:

  • Removing the retaining nut
  • Removing the retaining clip
  • Removing the O-ring
  • Replacing the cartridge

Once you’ve replaced the cartridge, cleaned the handle, and fixed other issues with your faucet, you’ll need to reverse the procedure and make sure you reassemble everything.

Final Thoughts

There are many reasons for removing a faucet kitchen handle, including replacing a malfunctioning cartridge or filter, cleaning the faucet, or looking for leaks.

If you’ve never removed or fixed a faucet handle before, this task may seem complicated. If you follow these steps, though, you should be able to complete the job. If you need more information about how to remove a kitchen faucet handle without screws, Mr. Kitchen Faucets can help.

At Mr. Kitchen Faucets, we aim to provide our customers with easy-to-follow instructions that can help you identify and fix various faucet and sink problems.

Check out our blogs for more useful product reviews and repair guides.

This post was last modified on 16/10/2023 08:25

James marcus

Garden Courte is a blog written by [James Marcus], a passionate gardener and writer. She has been gardening for over 20 years and has a deep understanding of plants and how to care for them. In her blog, she shares her knowledge and experience with others, providing tips and advice on gardening, plant care, and more.

Share
Published by
James marcus

Recent Posts

DIY Turmeric Scrub for Hyperpigmentation

For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…

12 months ago

Top 15 Cook Interview Questions and Answers

Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…

12 months ago

What Color Walls Go With Grey Kitchen Cabinets [Schemes]

Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…

12 months ago

10×10 Kitchen Remodel Cost: Everything You Need to Know

Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…

12 months ago

How Much Do Quartz Countertops Cost?

Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…

12 months ago

Australian IKEA Kitchen Design & Installation Costs

IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…

12 months ago