An under-sink water filter can be attached to the cold-water supply of the main faucet, but in that case, it would filter all the cold water you use for cleaning as well as drinking, which would require you to change the filter more frequently. Here, we show how to install a filter with its own dedicated drinking-water faucet.
The steps shown below show installing a simple single-stage filtration and absorption system, which will filter out most particles. It has a single small filter that takes up little space and needs to be replaced only twice a year or so. Two- and three-stage filters have, unsurprisingly, two or three canisters. Some filter systems add a tank as well. Here are some common filter options:
Activated carbon (sometimes called charcoal) filters are inexpensive. They will remove most particles and much of the chlorine, but cannot remove heavy metals like lead and copper and won’t improve acidic water from wells. Over time, as particles collect, water pressure through the faucet will lessen as particles collect and clog.
KDF (kinetic degradation fluxion) filters cost more, but do a better job of removing (actually, converting) chlorine and will effectively filter out heavy metals. They also kill microorganisms that are often missed by an activated carbon filter.
An ion exchange filter is typically a canister (it may be one of the stages of a two- or three-stage filter system) containing tiny resin beads that “deionize” water, to remove nearly all inorganic particles. When used along with an activated carbon or KDF filter, pretty much all inorganic matter, parasites (including giardia), and chlorine will be removed.
If you have serious water problems, the most common solution is a reverse-osmosis filter (see photo). These typically have two or three canisters plus a tank, and so take up a good deal of under-sink space. In addition to the filtering power of KDF filters, a reverse-osmosis filter removes radioactive contamination, which is a problem in many areas, and turns hard water into soft, drinkable water.
The faucet will require a hole in the sink’s deck. The sink shown here came with four holes, so one was available. Some porcelain or fireclay sinks (like the one shown here) have knockouts, which you tap with a hammer and cold chisel to produce a hole. If none of these options are available, you may need to drill a new hole in the sink or countertop.
The water path is easy to follow: It runs from the cold-water pipe to the filter, and then to the faucet.
1. MOUNT THE FAUCET. Mount the faucet through the sink with the hardware provided. Position the rubber gasket on the bottom of the faucet’s body so it seals against the top of the sink. To be sure of the seal, set the faucet in a bed of clear silicone caulk. Here, there is a U-shaped washer and a long nut. If you cannot reach the nut with a wrench, use a basin wrench instead.2. ATTACH THE BRACKET WITH FILTER. Screw the filter canister onto the mounting bracket. Mound the bracket at a place convenient for running the supply tubes. The filter may shake a tiny bit, so make sure it does not touch any pipes.3. CONNECT TO THE FILTER. Connect the supply tube that comes from the filter to the port labeled OUT. (There may be arrows or other indications showing the direction of water flow.) Connect the other supply tube to the IN port. These supply tubes have plastic threads; wrap them with three windings of plumbing (Teflon) tape before screwing them in.4. CONNECT TO THE WATER SUPPLY. Attach the other end of the tube leading to the IN port to the cold-water supply. If the filter doesn’t come with a T fitting on the supply line, you will have to add one to your existing sink cold-water supply valve.
Excerpted from Plumbing (The Taunton Press, 2016) by Steve Cory.
Garden Courte is a blog written by [James Marcus], a passionate gardener and writer. She has been gardening for over 20 years and has a deep understanding of plants and how to care for them. In her blog, she shares her knowledge and experience with others, providing tips and advice on gardening, plant care, and more.