No Water Coming Out of The Tap? Fix It Now!

No water coming out of tap when turned on? It’s a dreaded situation that can disrupt your household and daily routine. Your taps, or faucets, are responsible for controlling the flow of water coming from the source. Since they experience a lot of wear and tear from everyday use, your taps can stop working due to many reasons. So, why is no water coming from tap?

At Heritage Plumbing, we are experts in fixing faucets and getting your taps running again. Whether your tap is blocked or broken, we have dealt with every faucet issue during our years of plumbing Reservoir.

You are watching: No Water Coming Out of The Tap? Fix It Now!

If your tap has stopped working, here are the common reasons why it may not be running and how you can fix it now.

#1: Check Other Taps

If no water coming out of tap when turned on, it’s a good idea to check if other household taps have also stopped working. Try other faucets, such as your kitchen and bathroom taps, to see whether water is coming out of them. If your other taps are running fine, you can safely assume that only one tap is faulty.

In this instance, you may need to replace the faulty faucet or dislodge a blockage in the pipes. Once you know how many taps are affected, you can determine the extent of the problem and whether you need to call your supplier or plumber Melbourne.

#2: Check With Your Supplier And Neighbours

If no water is coming out of any of your household taps, it usually means that your water supplier has turned off the service. Whether due to forgetting to pay your water bill or onsite maintenance, your supplier may have stopped your water supply for many different reasons.

Before contacting your supplier, ask your neighbours if they are experiencing the same problem. If your neighbours’ taps have also stopped running, this means that your tap troubles are possibly part of a larger issue.

In such cases, contact your water supplier to find out if they shut off the service and when they will turn it back on.

#3: Check Your Hot Water

Checking your hot water can also help you determine the cause of your tap troubles. If cold water is coming out of your tap, but you are unable to get hot water, your water heater may be broken.

There are many reasons why your water heater can stop working. It could be due to sediment build-up, a leak or because it is unplugged. If you identify your water heater as the cause, you should flush it and let it reheat. If you are still unable to get hot water from your taps after doing this, contact your Melbourne plumber.

#4: Check Your Water Main

Similarly, if no water coming out of tap when turned on, you should check if your water main is open. No water will run through your mainline, and therefore your faucets if your main valve is closed. We recommend that you open the main valve and try your taps again.

If your taps are still not running, contact plumbers Melbourne to diagnose the cause and fix it.

#5: Check For Leaks

Leaks are one of the most common causes of no water coming from tap. If your tap is not running, it may be due to a leak in your plumbing pipes. A leak can lower your water pressure and stop the flow of water completely. You can determine if this is the cause of your tap troubles by checking your home’s water supply lines for drips or dents. If you notice any leaks, you should contact your plumber to fix your pipes.

#6: Check For Blockages

If you don’t find any leaks, a blockage in your plumbing pipes could be the cause of your tap troubles. Clogged pipes are usually due to sediment build-up, which stops the flow of water. This build-up may be from limescale, rust, debris or heavy metal deposits.

If you suspect that your pipes are blocked, you should call your plumber. At Heritage Plumbing, we would conduct a drain camera inspection to determine the cause of the blockage and clear it using a high-pressure jet.

#7: Check For Rust

Rust is a common reason why your taps may suddenly stop working. If you notice that rust has gathered on your tap’s exterior, it is a sure sign that it has gathered on the interior too. Rust comes from general wear and tear and can cause blockages.

If you see any rust, you should replace your tap with a new faucet. We recommend that you contact professional plumbers Melbourne to ensure your tap installation is efficiently carried out.

#8: Check For Frozen Pipes

Your tap troubles may sometimes be due to frozen pipes. A frozen pipe can stop the flow of water to your home’s faucets. If no water coming from tap, check if its connected pipe is frozen. If it is, try unfreezing it using a hairdryer to get the water flowing again.

If your tap is still not working, contact your plumber to diagnose and fix the problem.

#9: Check For Damaged Or Dislodged Tap Washer

If no water coming out of tap when turned on, it may be because the tap washer is damaged or dislodged. Damaged washers reduce your tap’s water supply to a trickle, before stopping it completely. If your tap starts producing only a trickle of water, you should consider replacing your washer.

Similarly, if excessive whistling or chattering noises are coming from your tap, this is usually caused by a dislodged washer. You should also repair or replace your washer as soon as you notice this to avoid further tap troubles.

If you choose to fix it yourself, make sure you turn off your water supply first. Otherwise, contact professional plumbers Melbourne to fix it for you.

#10: Consider Your DIY Installations

DIY installation problems may also be why no water coming from tap. It’s great if you want to do it yourself but make sure you follow all instructions and have the correct tools on hand. A second-rate installation may lead to leaks or damaged faucets, which could stop the flow of water.

If you want to avoid DIY installation problems and ensure that your taps flow properly, you should engage professional plumbers Melbourne to install your faucets.

If you find yourself in the dreaded situation where no water is coming out of your tap, don’t panic. There is usually a simple reason why the water has stopped flowing. From checking with your supplier to finding leaks, getting your tap running again can be done by determining the cause so you can fix it now.

Whether you choose to fix it yourself or contact a professional plumber, make sure the repairs are efficiently, quickly and safely carried out, so you can return to your daily routine.

At Heritage Plumbing, we are experts in fixing faucets and getting your taps running again. Whether your tap is blocked or broken, we can fix it. With our countless hours of experience delivering high-quality plumbing Reservoir services, we will provide the best solution to any plumbing problem you are experiencing.

If your tap has stopped working, contact us today on 03 9498 0458 and our expert team can quickly assist.

Do you have any questions about how to fix your tap troubles? Want to know more about any of these common causes and how to repair them? Leave us a comment below and our friendly team will be happy to help.

Related Posts:Water Leak Plumbing15 Things to Consider Before Hiring an Emergency Plumber11 Signs You Need a Plumber in MelbourneHow Much Does a Plumber Cost in Melbourne?10 Questions to Ask a Plumber Before HiringDIY Plumbing vs Hiring a Professional Plumber – Pros and ConsWhat All You Need to Know When Hiring a Commercial Plumber in AustraliaHow to Find & Hire A Low-Cost Plumber in Your Area

Source: https://gardencourte.com
Categories: Kitchens