Categories: Kitchens

Contact Form

Published by
James marcus

Between washing dishes, prepping food and cleaning, your kitchen sink has to stand up to a lot of daily wear and tear. That’s why it’s particularly important for your sink to have a durable, watertight seal. Old, damaged sealant or a sealant that isn’t 100% waterproof can let water and moisture seep between your sink and counters, which can create leaks in your cabinets or lead to problems like mold, mildew and rot. Knowing how to seal a kitchen sink properly with a 100% silicone sealant will prevent these problems before they start.

Tools & Supplies for Sealing Sinks

Picking the right sealant can make all the difference. For sealing a kitchen sink, or anywhere water could be present, choose a GE-branded 100% silicone sealant, like GE Tub & Tile Silicone 1® sealant. This sealant is 100% waterproof, permanently flexible and has 7-year mold-free product protection,1 so you can create a lasting, mold-resistant and watertight seal.

Whichever product you choose, check the packaging to ensure the sealant will adhere to your countertop material without staining it.

Pro Tip: 100% silicone sealants are not paintable so be sure to pick the appropriate color for your project.

Besides a GE-branded 100% silicone sealant, you will also need:

  • Caulk gun
  • Painter’s tape
  • Latex gloves
  • Soapy water
  • Paper towels
  • Utility blade
  • Caulk tool
  • Mineral spirits
  • Isopropyl alcohol

With all your tools and supplies ready, follow these steps to learn how to seal a kitchen sink so it has long-lasting, 100% waterproof protection:

  1. Start with a Clean Surface

    Whenever you start a new sealing project, make sure you have a clean work surface by wiping it down with isopropyl alcohol. If you’re replacing old caulk or sealant, completely remove it first, then wipe down the area with isopropyl alcohol. Let the surface dry before laying a new bead.

    Safety Tip: Make sure your work area is well ventilated when using isopropyl alcohol.

  2. Apply Painter’s Tape

    For a smoother bead and easier cleanup, apply painter’s tape on either side of the area you’re sealing.

  3. Carefully Cut the Sealant Cartridge

    Next, prepare your sealant by cutting the tip of the cartridge. Cut the cartridge tip at a 45-degree angle so the hole is about the same size as the area you’re sealing. Some caulk guns have a tool to cut the cartridge tip, but we recommend using a utility blade for consistently clean results. Cut off less than you think you’ll need because you can always cut more. Once cut, pierce the cartridge’s inner foil seal using the metal rod on your caulk gun or a long nail. Then load the sealant cartridge into the caulk gun.

  4. Apply Sealant

    After prepping your sealant and your work area, start running a bead of sealant around the entire sink where it meets the countertop. Start at one corner of the sink and work your way around. Pull the gun toward you and maintain a relaxed, confident grip and steady speed to apply the bead smoothly. If you can’t make it in one pass, it’s ok to readjust your grip and start where you left off. Fill gaps with additional sealant as needed.

  5. Tool the Bead & Remove the Painter’s Tape

    Use a caulk tool or your finger to tool the sealant bead until it’s smooth. It’s important to tool the bead before the sealant starts to cure, so if you need to, you can tool in sections. Run a bead of sealant in one manageable section, like along one edge of the sink, tool the bead, then continue applying more sealant.

    Pro Tip: To aid in tooling, dip your finger in a mixture of dish soap and water.Then, immediately remove the painter’s tape before the sealant has a chance to cure. Remove any excess or unwanted sealant with mineral spirits.

  6. Let Sealant Cure Completely

    Finally, allow the sealant to cure completely for the best performance. GE Tub & Tile Silicone 1® sealant is same-day water-ready2 and fully cured in 24 hours, but check your product for specific curing instructions.Once the sealant has cured, your kitchen sink will be watertight and ready to use. For more step-by-step sealing tutorials with high-performing GE-branded sealants, check out our other How-To guides.

1Cured sealant is resistant to stain causing mold and mildew. Regular cleaning of the cured sealant is required, however, as soap and other residue can cause secondary mold and mildew growth.

2Exposure to water possible in as little as 12 hours with bead size max 3/16″, temperature min 65°F and humidity min 50%. Do not touch or clean sealant for 24 hours.

This post was last modified on 20/10/2023 10:19

James marcus

Garden Courte is a blog written by [James Marcus], a passionate gardener and writer. She has been gardening for over 20 years and has a deep understanding of plants and how to care for them. In her blog, she shares her knowledge and experience with others, providing tips and advice on gardening, plant care, and more.

Share
Published by
James marcus

Recent Posts

DIY Turmeric Scrub for Hyperpigmentation

For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…

1 year ago

Top 15 Cook Interview Questions and Answers

Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…

1 year ago

What Color Walls Go With Grey Kitchen Cabinets [Schemes]

Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…

1 year ago

10×10 Kitchen Remodel Cost: Everything You Need to Know

Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…

1 year ago

How Much Do Quartz Countertops Cost?

Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…

1 year ago

Australian IKEA Kitchen Design & Installation Costs

IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…

1 year ago