Low Stress Training (LST) Autoflower Cannabis - When to Start LST Weed Plants
Gardeners have used the low-stress training (LST) technique to improve yield, manage plant structure, and optimize growth across various plant species. In cannabis cultivation, LST becomes particularly pivotal, especially when dealing with autoflowering strains. The article “Low Stress Training (LST) Autoflower Cannabis – When to Start LST Weed Plants” by Enzo Schillaci, published on January 25, 2023, delves into the intricacies of employing LST in the cultivation of autoflowering cannabis plants. The technique, which involves gently directing the plant’s growth by bending and tying down the main stem and other branches, aims to improve plant structure, enhance light absorption, and boost yield without inflicting stress on the plant.
The article meticulously explores the what, when, and why of LST, providing a comprehensive guide that navigates the technique’s various aspects and benefits. It emphasizes the gentle approach of LST instead of high-stress training (HST), especially considering the rapid growth and shorter life cycles of autoflowering strains. The piece also explores various LST techniques, such as the Tie Down Method and the Screen of Green (SCROG) Method, providing insights into their pros, cons, and application in cannabis cultivation. Furthermore, it addresses common queries and provides additional recommendations for those keen on implementing LST in their cultivation practices.
You are watching: Low Stress Training (LST) Autoflower Cannabis – When to Start LST Weed Plants
The author, Enzo Schillaci, brings forth a wealth of knowledge in cannabis cultivation, particularly in managing and optimizing the growth of autoflowering strains. His insights are not merely theoretical but are deeply rooted in practical experience and extensive research in the field. The article is not just a guide but a reservoir of knowledge that reflects Enzo’s expertise and commitment to assisting growers in navigating the nuanced journey of cannabis cultivation. His holistic approach ensures that the information provided is not only scientifically accurate but also practically applicable, making it an invaluable resource for novice and seasoned cannabis cultivators.
Low-stress training is a plant training technique used to train cannabis plants into the desired shape to maximize light usage and yields, among other benefits. LST allows growers to control height and maximize yields without having to invest in new growing equipment and with relatively little work. Plant training sounds like an odd concept to beginner growers. However, it plays a key role when it comes to plant management. Gardeners of many different types leverage training techniques to boost the yields and improve the structure of a wide variety of crops, from chilies and tomatoes to fruit trees and grape vines. At its most basic, the act of training is carried out to physically manipulate a plant in a certain way. Training comes in two primary forms: High stress and low-stress. As the name suggests, high-stress training involves rather brutal techniques that intentionally damage plant tissues in order to direct growth.
While these methods work great on photoperiod strains with a longer vegetative phase, autoflowering cultivars grow too fast to properly recover from them before the flowering phase begins. Low-stress training, on the other hand, is a much more gentle method. Instead of physically harming plants, it simply involves directing their growth by bending and tying down the main stem and other branches. This results in an improved structure that has better aeration and therefore reduces the chances of devastating mold that can ruin an entire grow. It also causes smaller buds to grow towards the light, creating more uniform flowers and superior yields. Low-stress training is perfectly compatible with autoflowers, as they have no excess stress to try and recover from before blooming begins.
Low stress training (also known as LST) is a technique used to train your weed plant into the desired result using the lowest amount of stress possible. There are also High stress training (HST) techniques like topping or pruning but we won’t be talking about them here as they tend to stunt growing for a short period of time and cannot be used with the vast majority of auto-flowering cannabis strains. This is due to the fact that autos come with an inbuilt genetic time that predetermines when the plant will switch from the vegetative growth stage to the flowering cycle.There are a couple of auto strains that can handle HST, but for the most part, experienced cultivators agree that these high-stress techniques should be reserved for photoperiod cannabis plants.
Unlike autos, the lifecycle of a normal photoperiod is determined by the amount of light she receives. When grown indoors, cultivators can control how long the vegetative growth stage continues by simply keeping the light cycle at 18 hours on / 6 hours off. This mimics the late spring into summer lighting conditions when weed would naturally be in the veg cycle outdoors.
As soon as you want the plants to start flowering you simply switch the light cycle over to 12 hours light / 12 hours dark and photo plants will begin the flowering stage. This amount of control allows growers the chance to try any type of growing technique or method with the assurance that if the plants growth is stunted they can simply extend the veg period and let it recover. This is not the case with autos, and the reason why we need to be more careful with how the plants are treated.
Ok, so back to LST…Low-stress training techniques can help you maximize the light consumption of the plant by spreading out and flattening the canopy, allowing for the lower budding sites to receive the same amount of light penetration as the main cola. With normal auto-flowering cannabis plants that have received no stress training the main cola will receive not just the most light, but also the most nourishment and the highest levels of growth hormones (otherwise known as auxins). When we use techniques to level out the canopy, the plant inherently spreads out the nutrients and the auxins more equally, resulting in much more even flower development.
You are essentially tricking the plant into thinking that you have chopped off the main cola, and so she will spread out the energy among the other branches and budding sites to try and ensure her genetic code is passed on. Remember, although we want the buds to be totally seed-free, the reason they grow in the first place is to produce seeds. A female cannabis plant will do whatever she can to ensure that her flowers grow big and healthy, and we can use this to our advantage.
The best part? Low stress training doesn’t take any special equipment or knowledge. It’s an easy technique that beginners can safely try when growing an autoflowering cannabis plant. While it might take a few attempts to really dial in your technique, the lack of stress involved means you’ll still get a good yield, even if you don’t get things completely right the first time. When it comes to equipment, all you really need are plant ties. These come in a variety of different forms, from thin wire to thick ties that are coated with rubber. As you can guess, the latter is far less likely to accidentally hurt plant stems. You’ll also need a drill if you’re using solid plastic containers. Simply drill just below the rim of the pot so that you can thread your ties through them when bending and tying down your plant’s branches.
There isn’t an exact age or size to start LST’ing autos, in theory, you can start as soon as the first true leaves grow, we recommend start training as soon as your plant can reach the edge of the pot, around 10-15cm or 4 – 6 inches (use this as a guideline, it mainly depends on the structure of your plant more than the size).
Before starting, you need to be sure you’ll benefit from it as it may have a toll on your autoflower, read a bit on how to LST autos, and always remember that you should not LST during flowering because it will stress your plant and decrease the yields. Any kind of stress (even from overwatering) can ultimately ruin your harvest so make sure you really need to do it before starting any plant training method.
Ideally, you want to get the structure of your plant established during the vegetative phase. Getting this done early will set the stage for the flowering phase. Before your plants start to develop buds, you’ll have created a balanced and even canopy that is capable of creating uniform flowers that will receive superb aeration and even light exposure.
LST plant training can be used on autos no matter whether you are growing indoors under artificial lighting, or outdoors under the natural sunshine. LST is more commonly used for indoor grows, as it helps maximize the production from a confined space, but many outdoor cultivators also choose to use these methods to help increase their crops yield.
Nobody wants a bunch of popcorn buds (the common name given to the low quality, low-density buds produced by the lower branches of a cannabis plant), so why not use LST techniques to help ensure that every single flowering site has the chance of growing a big, old, fat, juicy nugget!
LST is used to maximize output yield, maximize light usage, decrease the vertical space needed or just to control stretching using the least amount of stress possible. We recommend starting slowly training this autoflower at around week 3 and stop when you can’t notice any more growth, at this stage, she will only focus on bud production. At Fast Buds we offer a wide variety of strains that perform outstandingly with LST, we particularly recommend one of our most popular strains to date Zkittlez Auto among others.
She develops a large main cola and a few lateral side branches, she tends to take a lot of nutrients resulting in a sturdy strain that will respond nicely to training and will grow multiple hefty colas throughout the plant. When performing LST, start slowly and be careful not to hurt your plants. The best way is to bend it a little each day in order to get the least amount of stress, be patient, and don’t overdo it! If you want to experiment, you can also try starting the LST from the point the first set of “true” leaves appears. When a cannabis plant first germinates, the first leaves that grow are known as Cotyledon leaves or seed leaves. These rounded, oval-shaped leaves help break the seed open and help provide the first dose of photosynthesis, but they soon disappear.
Next to appear are the first “true” leaves, and once these open up you can start to train the plant. A normal, healthy cannabis plant will grow directly upwards at this point. Using a careful touch and soft gardening ties, you can cautiously bend the plant so it is sitting horizontally. As she develops you can continue this trend, keeping the growth sideways and not vertical.
Read more : Why Are My Plants Leaves Turning Black? What You Should Know
Some cultivators swear by waiting until the first week of flower before you start to tie the plant down, but in our experience, this can cause stunted growth and flower development. So in general, we suggest starting early and by keeping the training as soft and gradual as possible, you give the plant the best chance of reaching its full potential. So, with that all in mind let’s break down the full range of benefits that LST techniques can bring to the table for both autoflowering and photoperiod weed plants.
The overall yield of your autoflower plant can be increased by using LST, more light will get to the foliage, thus producing more food and resulting in denser buds.
Normally LST is needed to make buds on the lower branches denser, if no LST is performed you would need another light source. This is one of two ways of maximizing the overall yield when harvesting and also saving a couple of bucks.
Getting light to lower branches is another way to maximize yield and is especially good to perform with autoflowers because they tend to be smaller and bushier so this would result in not only more bud but also a better-looking plant overall.
Normally growers have a limited space to grow their autoflowers, this method is used to control the space your plant takes, especially if you have multiple plants in a small space. The best way to control space is by using the SCROG method and Tie down method will be explained in detail in the next topics.
Sometimes when autoflowers don’t get enough light they tend to stretch and can get very bad, resulting in aery buds and can end up taking too much space.
Have in mind that you can also perform LST outdoors but usually is not needed because your plants aren’t limited by space.
Have in mind that there isn’t such a thing as the most effective LST for cannabis plants, there are several methods used when low-stress training such as SCROG, and the Tie-down method, and they should be used according to how your plants grow.
Both of them will have similar results and can be used for achieving what we covered earlier.
The Tie-down method consists of making holes on the edge of your pot and use any kind of string (must be flexible) to bend and hold down your plant, usually starting with the main branch, your goal is to level all branches to the main cola.
For this plant training method we highly recommend trying out our Lemon Pie Auto, this high yielder can produce up to 550gr/m2 and develops a great structure with great internodal spacing that allows you to comfortably tie down the branches, increasing the yields.
By properly bending down the branches and shaping your cannabis plant, you will reach a structure similar to what you would get with a SCRoG net.
She is so heavy had to lay the plant on its side to cut and remove trellis so her branches and even main stem did not split. Sticky as she can be, had to clean hands and trimmers (eyes once lol) many times for just a light trim. Easy trim Excellent plant Fast Buds… – HisHope
The tie-down method doesn’t necessarily need to be used to even out your canopy, you can shape your plants either way you want, even just for controlling their height if you have a limited growing space.
Doing it properly will allow your plant to develop multiple bud sites that get equal amounts of light and result in better quality and bigger yields.
The Screen of Green consists of using a net or type of screen, similar to a volleyball net, used to maintain branches to the same height by bending and holding the branches down.
This is a great method to spread out the canopy and take full advantage of your growing space, by spreading out the canopy your plant will develop bud sites that will get just the right amount of light to fatten up nicely. One important element when talking about SCROG is genetics, depending on the plant structure you can have different results because some strains work better in this type of setup. When Scrogging, it’s better to use one strain at a time and preferably a strain that grows shorter and with a lot of flowering sites.
A vertical SCROG is the best way to maximize your growing space, this method works by having a SCRoG net vertically that extends on to the sides of your growing tent.
Read more : DIY Automatic Watering System for Plants
By doing it this way you allow your plants to grow more bud sites and absorb all the light emitted by your light fixture, reducing light waste and enhancing your yields even more.
I have also used some more paper clips (XL sized ones) to pull side branches to the main stem, it works pretty darn well in keeping the plant upright because these buds are getting extremely heavy – some of the branches could not hold them up anymore. This also sort evened the canopy out a little, which is great of course… I think this will be a good harvest! – FrankieBones
Orange Sherbert Auto performs extremely well with LST techniques thanks to her Sativa heritage, perfect for vertical Scrogging. This lady is one of our tallest hybrids reaching up to 150cm (around 60in) and yielding up to 600 gr/m2 (1.3lb) therefore low-stress training is not only advised but recommended.
This will help to control stretching (especially for indoor growers), open her canopy, and increase yields even more. This autoflower has no problem growing tall and quickly develops extremely resinous large-sized buds.
Sea of Green (aka SoG) works similar to the SCRoG method but instead of growing fewer plants with multiple sites, you want to grow more plants with fewer bud sites.
Have in mind that when doing a Sea of Green you will have to grow the same strain or strains with similar statures so they don’t overshadow the plants around and all develop at the same rate, so we highly recommend our OG Kush Auto for this kind of growing.
This strain grows very homogeneously and with a compact structure while yielding up to 550gr/m2, making it easy to fit as many plants as you can, perfect for this type of growing.
The right structure will make it easy to fill your whole growing space with as many plants as you can and using smaller pots, usually resulting in harvesting earlier and without much trouble, due to the shorter stature your plants will have.
Your plant will end up with a similar aspect either with LST or HST, as you may know, there are several ways of training your cannabis plants, and all work just great but with autoflowers it’s recommended you only use low-stress training techniques. Training your autoflowering plant will affect its growth, when done properly you can shape your plant to the desired height and structure, but be cautious because cannabis plants can easily get stressed, especially autoflowers.
This happens because autoflowering plants have a limited amount of time before starting to flower, when plants are stressed they can need up to 7 days to fully recover and continue growing normally so performing high-stress techniques on autoflowers can ultimately result in lower yields. Now, you can perform HST such as topping or fimming on autos but it’s not recommended for beginners and even more experienced growers should be careful.
Enzo Schillaci’s exploration of Low-Stress Training for autoflowering cannabis plants is informative and a testament to the depth and breadth of understanding required in cannabis cultivation. The article beautifully intertwines the science and art of employing LST, providing a guide that is as comprehensive as it is accessible. The detailed breakdown of various LST techniques and the insightful exploration into the when and why of employing them offer growers a clear path toward optimizing their cultivation practices.
In my decades of experience in cannabis cultivation, I’ve witnessed and practiced various plant training techniques. I can affirm that LST, especially for autoflowering strains, is a delicate dance between understanding the plant’s natural tendencies and gently guiding its growth. Enzo’s article does a commendable job of guiding cultivators through this dance. His emphasis on the gentle approach of LST, especially considering the rapid and often unforgiving life cycle of autoflowering strains, resonates deeply with my philosophy of understanding and respecting the plant’s natural processes.
The article also does a splendid job of demystifying the various techniques of LST, providing clear, actionable insights that growers can implement in their practices. The inclusion of pros and cons for each method and the clear guidelines on when to employ LST offer a practicality that needs to be included in many guides. Enzo’s work is not just a reflection of his expertise. Still, it is a valuable contribution to the cannabis cultivation community, providing a resource that will enhance the practices of many cultivators across the globe. His work is not just read but is a journey through the nuanced world of cannabis cultivation, and I am delighted to have been a part of this journey. Happy growing, my friends!
Low-stress training (aka LST) was designed for height control (not for improving yields) but, by having a bigger plant with a smaller height, you can end up getting more bud production because all of the branches will be getting light equally and there will not be any underdeveloped buds (popcorn buds).
It all depends, this method is normally used by those with a limited grow space but if you are not limited by space, it’s up to you.
It’s a good idea to experiment with LST, this way you get more experience and can get better yields and better quality buds but, in general, it depends on the situation.
Yes, in theory you can but you won’t have the best results. If you’re using LST you want to improve yields you don’t want to get a lower production, so even though you can, you should adjust the ties when your plant outgrows them and preferably remove them around week 2 of flowering. This way you avoid stress and harming your plant.
Low-stress training is not hard but like in everything, you have to get the hang of it. Try both techniques mentioned before and adjust your LST style. We recommend trying LST with a number of different strains you can find at Fast Buds, preferably strains that take a bit more to grow so you have time to train it properly.
Remember that if you’re a more experienced grower and have grown autos before, you can take a look at how to top a weed plant.
Source: https://gardencourte.com
Categories: Outdoor
This post was last modified on 29/10/2023 00:04
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…