If you’re planning to remodel your kitchen, you may be thinking about including a built-in soap dispenser for the kitchen sink. These dispensers are much more attractive than plastic bottles of detergent, and they add sophistication and polish to your kitchen. But, because installing a built-in dispenser requires you to cut a hole in the countertop and sink base, it’s essential to decide on its placement before you begin cutting. So, which side of the sink should your built-in soap dispenser go? We’ve done the research, and we have the answers for you!
Most people place the soap dispenser on the side of the sink that corresponds with their dominant hand. However, there is no hard-and-fast rule about this. Instead, you should take into account the configuration of your sink, the number and type of dispensers you plan to install, whether or not there is a sprayer separate from the faucet, and your personal preferences when washing dishes.
You are watching: What Side Does The Soap Dispenser Go On?
We’ll address each of these questions in depth in the remainder of this article and explore whether the guidelines are the same for placing a built-in soap dispenser next to a bathroom sink. We’ll also investigate how far apart the soap dispenser and faucet should be, how to hook up a built-in kitchen soap dispenser, and whether installing one is worthwhile. Keep reading to learn more!
The configuration of your sink may pre-determine where the soap dispenser should go. For example, if you have a double-bowl sink, you should place the soap dispenser on the side where you plan to wash dishes so that you won’t be reaching over clean, rinsed dishes for soap. Also, if there is off-center garbage disposal under the sink, its size and position may determine where there is room for the soap container.
Double sink with soap dispenser on the right and sprayer on the left.
How many dispensers do you plan to install? Just one for dish soap, or do you plan to add others for hand soap and lotion? And what about a sprayer? The number and type of these accessories should help you determine the most strategic placement for each. For example, you’d likely choose to position hand soap and lotion dispensers next to each other; but you might not want a sprayer and your dish soap on the same side of the sink.
Read more : Turning Base Cabinets into a Kitchen Island
In most kitchen sink setups, the soap dispenser and sprayer are on opposite sides.
The most important factor in determining where to place your kitchen soap dispenser is its ease of use, and that is mostly a matter of personal preference. Imagine yourself washing dishes: do you carry dishes to the sink in your right hand or your left? Which hand do you typically use to turn on the faucet? When you’re scrubbing pots and pans, do you tend to hold them with your left hand and wash with the right, or vice-versa? Most people place their soap dispensers on the side of the sink that corresponds with their dominant hand, but this is certainly not a universal choice.
Click here for a built-in kitchen soap dispenser on Amazon.
The decision is much simpler for bathroom sinks because handwashing is the only activity for which soap dispensers are needed. In addition, other accessories like sprayers, hot water shot dispensers, and garbage disposals don’t impede the placement. Built-in soap dispensers are almost always positioned to the right of the faucet assembly unless the main users of the sink in question are left-handed.
Click here for a built-in bathroom soap dispenser on Amazon.
Stainless steel kitchen sinks have from one to four holes pre-cut in them; these holes accommodate the faucet, handles if applicable, and accessories such as a sprayer or soap dispenser. They are “8-inches on-center,” meaning that the measurement from the center of one hole to the center of the next one is 8 inches. In almost all installations, the 8-inch rule is a good guideline for the placement of your soap dispenser; however, if you have a wide-mount faucet with lever handles, you may need to place the dispenser farther from the faucet to allow the handles clearance.
Click here for a built-in kitchen soap dispenser on Amazon.
Hooking up a built-in soap dispenser may seem like a job for a plumber, but it’s quite easy. Just follow these simple steps:
Soap dispensers have three major functions: eliminating messy clutter on your kitchen countertop, saving you money by allowing you to refill them with bulk liquid soap, and protecting the environment from disposable plastic bottles. The highest-quality dispensers cost $100 or more but last for many years and add a polished, sophisticated look to your kitchen. You can also choose a less-expensive option, which may not last as long but will still pay for itself over time.
If you have a creative bent, you can build your own soap dispenser. Unless you have the technical skills to negotiate the constraints of sizing your dispenser to fit the hole in your sink, the following ideas are best used to create soap dispensers that sit on the countertop of your kitchen or bathroom. You can buy pumps in a variety of sizes and styles to fit your homemade dispensers.
Read more : How Much Does It Cost to Snake a Drain?
Attach a store-bought pump to the top of a bottle of Jack Daniel’s; use melted wax to seal the deal. You can add black ribbon or other embellishments or let the bottle’sspeak for itself. For the best effect, choose an amber-colored soap that mimics the hue of whiskey.
You can make a soap dispenser to fit any rustic decor by spray painting a Mason jar and distressing the paint, as shown below. You can buy screw-on lids to fit the jars, with tubing included, making this one of the simplest DIY dispensers to create.
Click here for Mason jar lid soap dispenser pumps on Amazon.
For a unique twist, use an old metal tea box for your soap dispenser. This is another simple project: punch a hole in the top of the tea box for the tubing to fit through, and run a bead of silicone caulk along the bottom of the pump’s flange to cement it to the top of the box.
Create a dispenser with a natural feel by wrapping a glass bottle in jute or twine. Dress it up with antiqued lace, as shown below.
Buy a bottle and pump at your local craft store; then choose a clear handsoap and submerge a large sprig of a hardy herb inside for visual appeal.
Adding a built-in soap dispenser to your kitchen sink provides convenience, cost savings, and aesthetic appeal. Choosing the best dispenser to meet your needs is a complex decision, but you can ensure that you select the right product for your kitchen by following the guidelines above.
You may also enjoy the following articles:
13 Gorgeous Polished Brass Kitchen Faucets
How To Decorate Kitchen Counters [14 Actionable Ideas]
Source: https://gardencourte.com
Categories: Kitchens
This post was last modified on 04/11/2023 12:29
For all my beauties with dark inner thighs, armpits, bikini area and spots, etc, this…
Are you a passionate cook aspiring to embark on a rewarding culinary journey? Whether you're…
Discover the perfect wall colors to complement your grey kitchen cabinets, creating a harmonious and…
Generally, a 10×10 kitchen remodel ranges from $15,000 to $45,000, but several factors could cause…
Sleek and durable, quartz countertops are the latest trend in kitchen and bathroom renovation. Comparable…
IKEA kitchens are designed to be as simple as possible to assemble and install yourself.…