Parts & Accessories

Home Page

Prices & Specifications

Get Financing

You are watching: Parts & Accessories

Owner’s Manual

We have a variety of parts to fit any manufacturer’s stoves.

You can find the other parts and fittings for your stove installation at most hardware stores and home improvement centers. SupplyHouse.com also has very good prices for plumbing fittings.

SupplyHouse

Accessory Kit

75′ Feet 3 Wrap PEX Piping Up to 18 x 20 Water to Air Heat Exchanger (Can be swapped for up to 40 plate water to water exchanger) 20 Plate Water to Water Heat Exchanger (Can be swapped for sidearm exchanger) Small Pump 2 – 1″ Ball Valve Flanges

Our Price – $1,399.00

INSULATED PEX PIPING 3 Wrap – $7.40 per foot 5 Wrap – $10.90 per foot

HEAT EXCHANGER 18 x 20 – $253.00

PLATE EXCHANGER

Badger Insulated Pipe LLC

Part # LB20F

20 Plate – $230.00

SIDEARM HEAT EXCHANGER Sidearm with Mixing Value – $288.00

MIXING VALVEValve – $172.50

AQUASTAT CONTROLLER (Thermocouple temperature switch)

Manufactured by Dwyer Instruments, Love Division. Model TCS-4010 Controller – $172.50 See Owner’s Manual on how to quickly program the new controller for proper operation with your stove.

Honeywell Aquastat

Part Number L6006C1018

Used on current EZ Boilers models.

Honeywell Aquastat

DOOR GASKET 1″ fiberglass firedoor rope gasket – $6.90 per foot

Dodds Brothers Supply Company offers a door gasket kit at a bargain price.

Door Gasket Kit

SOLENOID 4×240 Solenoid – $52.00 Model 2005-M-1. Manufactured by Dormeyer.

CAUTION! The damper door controlled by the solenoid is designed to open only about one inch. That is all the air required for efficient burning of your fuel. Adjusting the door to open farther than about one inch will stress the solenoid and cause it to fail prematurely.

Electronic Actuator

Part Number GQD221.1U

Used on some older models to operate the damper door.

Actuator GQD221.1U

SIGHT GLASS Sight Glass – $86.00 Model G901-4 Manufactured by LDI INDUSTRIES

Sight Gauge grainger.com

Read more : Rust-Proof Screws: What Kind of Screws Won’t Rust?

Grainger.com part 1U614

THERMOCOUPLE PROBE Thermocouple Probe – $47.00 Model TCP60089 Manufactured by Tempco.

PUMPS Small Pump – $144.00. Model GPD15-6SFC. Manufactured by Badger. Large Pump – $288.00. Model GPD25-10SFC. Manufactured by Badger.

PUMP FLANGE 1″ Ball Valve Flange Kit – $58 Model 150SWP600WOG

Manufactured by Palconn

ANODE ROD

You MUST use ONLY a magnesium anode rod in your boiler! Aluminum anode rods will interact with the water treatment chemicals that you add to your tank to inhibit corrosion. You can purchase one at most hardware stores and big supply outlets such as Menard’s and Home Depot. Our friends at SupplyHouse.com also carry the correct magnesium rods.

Magnesium Anode Rod

CHIMNEY EXTENSIONS

We no longer manufacture or sell chimney extensions. Many hardware stores carry stove pipe. For longevity, it is wise to use double wall insulated pipe extensions. That helps avoid corrosive condensation in the extension which can occur when the exhaust is cooled too rapidly.

Boiler Antifreeze

It is possible to add antifreeze to your system for extra protection, such as the possibility of a power outage, or for those who expect to be away from their boiler for several days, and don’t have anyone present to keep the fire going. A hard freeze could render your system inoperable.

Boiler antifreeze

It works just like the antifreeze in your automobile, mixing 50/50 with water. It contains chemicals that also inhibit rust and corrosion. Just like in your car, it will last for years when maintained at the proper concentration.

Here is the product information, taken directly from the manufacturer’s website:

TRUEGARD® PG Inhibited HTF 50/50 / Concentrate Keller-Heartt TRUEGARD® Propylene Glycol Inhibited Heat Transfer Fluid 100% is a fully-formulated propylene glycol-based heat transfer fluid containing an inhibitor and additive package that controls corrosion of metals, helps prevent scaling and the fouling of heat transfer surfaces, and buffers the pH to maintain it in the optimum operating range. Product meets ASTM D8039 specification, which is the accepted industry standard for multi-metal corrosion protection for steel, cast iron, aluminum, copper, brass and solder. This fluid is compatible with most plastics, elastomers, and types of rubber. The multi-component inhibitor system formulation makes Keller-Heartt TRUEGARD® Propylene Glycol Inhibited Heat Transfer Fluid 100% an industry leader in fluid performance. Typical Applications: • Natural Gas Pipeline Heaters and Bath Heaters • Solar Protection • Ice Rinks • HVAC Systems; Freeze, Burst, Corrosion Protection • Process Heating and Cooling • Thermal Energy Storage • Refrigeration Warehouse Floor Heating • Sidewalk Snow Melting Systems

If you don’t see it here, call us. We can supply all of the necessary parts for your stove. (231) 823-2499

Home Page

Source: https://gardencourte.com
Categories: Outdoor