Whether you’re refinishing the deck or your kitchen cabinets, stain protects your wood and keeps it looking beautiful. But it can be difficult to properly plan your project if you don’t know how long it will take for the stain to dry.
The type of wood, the stain, and environmental conditions all affect how long it takes for wood stain to dry. In this guide, you’ll learn more about the drying time for stain and what you can do to speed up the process.
You are watching: How Long Does Stain Take to Dry? Everything You Should Consider
Average Time for Stain to Dry
Stain typically takes two to 12 hours to dry and 24 to 72 hours to cure fully, but dry times can vary significantly based on the product. You can usually apply a second coat after the initial dry time, but you’ll want to wait to put on polyurethane (which further protects your beautiful wood items from damage) until after the stain fully cures.
So what’s the difference between drying and curing? Drying is the minimum time it takes for you to be able to safely apply another coat of stain, while curing is the time it takes for the stain to fully dry, harden, and be safe for everyday use.
Related Article
Dry Time by Type of Stain
The type of stain and what it’s made out of determines how long it needs to dry and cure. No matter what stain you use, always check your manufacturer’s details to ensure the best result, and give the stain more time to cure rather than less.
Water-Based Stain
Water-based stains typically dry within three to four hours, but they’ll require an additional 24 to 48 hours to fully cure. These types of stains have a water-based solvent with a water-soluble dye. They’re reasonably hardy against the elements but not quite as durable as oil-based stains. Since they’re water-based, they will take longer to dry in environments with high humidity levels.
Oil-Based Stain
Oil-based stains take longer to dry than water-based stains, with an average drying time of 12 to 24 hours. They’ll also need an additional 72 hours to fully cure. These typically use linseed oil as a carrier to help the dye soak into and bond with the wood. Since they’re more durable than water-based stains, they’re ideal for outdoor projects such as decks, playground equipment, and more.
Gel Stain
Gel stains have the longest drying time, taking up to 24 hours to dry and as much as one week to fully cure. The viscosity of these stains makes them especially forgiving and easy to apply, and they disguise flaws in the wood without the need to sand.
Dry Time by Type of Wood
Just like every wood project is unique, so is every type of wood. Your dry time may vary based on the material you use, so be sure to do a little research before embarking on your next project. Here’s a breakdown of typical stain dry time by types of wood and where you may use them.
Hardwood
Stain on hardwood typically takes betweenfour and eight hours to dry and needs 24 to 48 hours to cure fully. Hardwood dries quicker than softwood, although hardwood may need two or more coats to achieve even coverage.
Common hardwood species include hickory, oak, maple, mahogany, cherry, walnut, alder, teak, ipe, and cumaru. These woods are well-suited for outdoor projects such as decks, fences, and porches. You can also use them to construct furniture, although they’re more rigid and can be difficult to work with.
Softwood
Stain on softwood usually takes 10 to 12 hours to dry and up to 72 hours to fully cure. Since softwood is more porous, it’s a good idea to use a pre-stain wood conditioner beforehand to ensure even coverage.
Read more : What Happens to Spiders in the Winter? Learn How These Pests Survive
Common softwood species include pine, cedar, fir, juniper, redwood, spruce, and yew. These are ideal for common household projects such as furniture, windows, doors, baseboards, and shoe molding. They won’t stand up to the elements, so must be chemically treated if you’re using them outdoors.
Pressure-Treated Wood
Stain on pressure-treated wood takes about the same time to dry as hardwood, typically four to eight hours. It will take about 24 to 48 hours to fully cure. Actual curing time will depend on the surrounding conditions, including ventilation, humidity, and temperature.
Common species used for pressure-treated wood include southern yellow pine, red and ponderosa pine, Douglas fir, and hem fir. This type of wood is an excellent and affordable option for outdoor projects such as decks, fences, porches, playground equipment, sheds, garden boxes, and treehouses.
Related Article
Factors That Impact Stain Dry Time
The drying time for stain depends on the conditions around your project, such as temperature, humidity, and airflow.
Temperature
When applying any stain, aim for a temperature between 50 and 80 degrees Fahrenheit. Colder temperatures inhibit the stain from penetrating the wood, and warmer temperatures cause drying to slow down.
If you can easily control the temperature inside, it’s best to use that to your advantage. If not, use fans or heaters to try to get the temperature as close to this range as possible.
Humidity
Elevated humidity causes stain to dry more slowly because it takes longer for the moisture to leave the stain. This factor is especially true for water-based stains. Use a dehumidifier in a basement, or plan your outdoor staining on a day with low to moderate humidity.
Air Circulation
Good airflow helps stain dry. Consider opening windows and doors and even running a fan to help circulate the air in your workspace.
Weather
Rain, hail, snow, and wind storms can impact how fast and smooth your stain dries. Plan your outdoor staining projects, such as your deck or wood fence, during a period of at least three dry, moderate-weather days.
Amount of Stain
Thin coats of stain allow for better and faster drying. Thick strokes could make your finish look blotchy and take longer to dry. You should let most stains sit for five to 15 minutes so they absorb into the wood. Then, wipe off excess stain with a lint-free rag.
How Long Does Wood Stain Take to Dry by Project?
Decks
Deck stain drying time is typically between four and eight hours, and it will take around 48 hours to fully cure. Since pros build decks outdoors, they typically use either hardwood or pressure-treated wood.
Porches
Wooden porch stains usually take six to eight hours to dry and around 48 hours to fully cure. Since porches are typically sheltered by a roof overhang, they’ll take longer to dry than surfaces left in direct sunlight.
Fences
Stains on wooden fences take betweenfour and eight hours to dry and around 48 hours to fully cure. Like decks and porches, pros usually construct fences from hardwood or pressure-treated wood. Before beginning your staining project, be sure that the grass below is totally dry, as damp grass might interfere with the stain’s ability to cure properly.
Flooring
Read more : Where Do Cats Sleep Outside At Night?
Stains on wood flooring usually take four to eight hours to dry and around 24 to 48 hours to fully cure. The higher the humidity in the home, the longer the stain will take to dry and cure. It’s best to play it safe and wait at least three days before walking on the floor after staining.
Furniture
Wooden furniture stains take between four and eight hours to dry and 24 hours to cure fully. The actual time it takes to cure will depend on the location and ventilation of your working area. Furniture left to dry indoors with fans going will take much less time to cure than furniture stained in the garage with little to no ventilation.
Note: Good ventilation is important for safety, as well as dry time. The stain’s fumes can potentially cause eye, nose, and throat irritation, nausea, dizziness, and more. Always work in a well-ventilated area and follow the manufacturer’s safety precautions.
Cabinets
Stains on wooden cabinets will usually takefour to eight hours to dry and around 24 to 48 hours to fully cure. Again, this depends on the humidity and ventilation of the area where the cabinets are left to dry.
Related Article
How to Make Stain Dry Faster
You can get a wood stain to dry faster by ensuring the environment is optimal for drying. But don’t forget to let the stains fully cure to ensure longevity and a smooth finish.
-
Allow the wood to dry completely after cleaning or pressure-washing before applying stain.
-
Choose a moderate-temperature day between 50 and 80 degrees Fahrenheit with average to low humidity.
-
Increase air circulation by opening windows and doors and turning on a fan.
-
Apply thin, even coats and wipe off excess stain with a lint-free cloth after letting the stain soak into the wood.
-
Use a space heater to warm a cool area, such as a basement or garage.
-
Read and follow the instructions on your wood stain for the best result.
By following all of these tips, you can complete a DIY wood staining project with confidence. However, if it seems like a lot to remember, you can also call in a pro, like a local deck refinisher or deck painter near you, to tackle the job for you.
Jenna Jonaitis contributed to this piece.
Source: https://gardencourte.com
Categories: Outdoor