If your KitchenAid refrigerator’s lights are not working, you’re not alone. This is a common problem with these appliances.
In this blog post, we will walk you through the steps to take to fix the problem. We will also provide some troubleshooting tips in case the fix doesn’t work. Keep reading for all the information you need to get your refrigerator’s lights up and running again!
You are watching: How to Fix KitchenAid Refrigerator Lights That Are Not Working
Related: 7 Refrigerator Brands To Avoid and 5 Most Reliable Brands
Reasons Why KitchenAid Refrigerator Lights That Are Not Working and How To Fix
1. In Sabbath mode
Sabbath mode, also called Shabbos mode or Shabat mode, is a feature on many KitchenAid refrigerators that disables certain functions in order to comply with the Jewish Sabbath and holidays.
For example, on Friday evening before sundown, you may want to disable the lights inside your fridge so they don’t come on during the Sabbath. In this case, you would use the Sabbath mode setting.
Sabbath mode can also be used to disable the ice maker and water dispenser. This is useful if you don’t want any automatic functions to occur during the Sabbath.
To turn on Sabbath mode, press and hold the “Sabbath” button for three seconds. A light will come on to indicate that the mode is active. To turn off Sabbath mode, press and hold the “Sabbath” button for three seconds again. The light will go off, indicating that the mode is no longer active.
If your KitchenAid refrigerator lights are not working, it’s likely because the Sabbath mode is activated. Simply press and hold the “Sabbath” button for three seconds to deactivate the mode.
2. Door Switch
The door switch turns off the interior lights when the door is closed. If the door switch malfunctions, the lights might stay on even when the door is closed.
To fix this:
First, check if the door switch is getting power by testing it with a multimeter. If it’s not getting power, then you’ll need to replace it.
To replace the door switch, start by removing the screws that hold it in place. Then, disconnect the wires from the old switch and connect them to the new one. Finally, screw the new switch into place.
3. Wiring harness
The wiring harness is the part of your fridge that connects all of the electrical components together. If one of your lights isn’t working, it’s likely because there is a problem with the wiring harness.
There are a few things you can do to try and fix this problem yourself. First, check all of the connections to make sure they are tight. If they are loose, tighten them up. If that doesn’t work, you may need to replace the wiring harness.
Replacing the wiring harness is a relatively easy fix that you can do yourself. Just be sure to follow the instructions in your owner’s manual carefully.
4. Light Assembly
If your KitchenAid refrigerator lights are not working, it may be due to a loose or defective light assembly. Replacing the light assembly is a relatively easy repair and can be completed in just a few minutes.
To replace the light assembly:
-First, locate the light assembly inside your fridge. It will be mounted on the ceiling or near the back wall.
-Next, remove the screws that hold the light assembly in place.
-Carefully pull out the old light assembly and disconnect the wires.
-Install the new light assembly by reversing these steps. Make sure to tighten the screws securely so that the new light assembly does not come loose.
5. Light Board
The light board is the part of the fridge that provides power to the light bulbs. If your fridge lights are not working, it may be because there is a problem with the light board.
There are a few things that you can do to troubleshoot this issue. First, check to see if the light board is getting power. If it is, then the problem may be with the light bulbs or the sockets.
If the light board is not getting power, then you will need to check the wiring. Make sure that all of the connections are tight and there are no loose wires. If everything looks good, then you may need to replace the light board.
To replace the light board, you will need to open up the fridge and locate the light board. It is usually located near the top of the fridge. Once you have found it, disconnect the wires and remove the screws that are holding it in place. Then, simply replace it with a new one and screw it back in place.
Once you have replaced the light board, you should test it to make sure that it is working properly. Turn on the fridge and check to see if the light comes on. If it does, then you have successfully fixed the problem.
6. Light Bulb
If your KitchenAid refrigerator light is not working, it may be because the light bulb has burned out. You can check this by looking at the light socket to see if the filament in the bulb is broken. If it is, you will need to replace the light bulb with a new one.
To do this, first unplug the refrigerator from the power outlet. Then, remove the light cover by unscrewing it from the socket. Next, remove the old light bulb and screw in a new one. Finally, replace the light cover and plug the refrigerator back in.
7. Light Socket
The light socket is the thing that the light bulb screws into. It is usually made of metal and has two or three prongs that protrude from it. The prongs are what make contact with the electricity and allow the current to flow through to the light bulb.
How to fix it?
If your light socket is not working, the first thing you should do is check the fuse box. If the fuse is blown, then you will need to replace it. If the fuse is not blown, then you can try screwing in a new light bulb. Sometimes, the light socket itself is defective and will need to be replaced.
You can buy a light socket at any hardware store.
If you have a defective light socket, the best thing to do is to replace it. You can buy a light socket at any hardware store. Replacing the light socket is a fairly simple process and should only take a few minutes. Simply unscrew the old light socket and screw in the new one. Be sure to screw it in tightly so that it makes good contact with the electricity.
8. Light Switch
The KitchenAid refrigerator light switch is a small, flat, white plastic switch located on the back of the fridge, near the top.
It controls the lights in the fridge and freezer compartments. If your fridge lights are not working, first check to see if this switch is in the “on” position.
If it is, then flip it to the “off” position and back again. This should reset the switch and turn on the lights. If your lights still are not working, then you may need to replace the switch. Check your owner’s manual for instructions on how to do this.
Kitchenaid refrigerator lights not working after power outage.
After a power outage, your Kitchenaid refrigerator may experience some problems. The lights may not work properly, and the fridge may have trouble cooling down. If this happens, don’t panic! There are a few things you can do to fix the problem.
First, check to see if the power outage was widespread or if just your home was affected. If the outage was widespread, it’s possible that the power surge when the electricity came back on damaged your fridge. In this case, you’ll need to call a repairman to take a look at it.
Read more : DIY guide: How to replace a bathroom faucet
If the power outage was just in your home, however, there are a few things you can try before calling a repairman. First, check to see if the lightbulbs in your fridge are burned out. If they are, simply replace them and see if that fixes the problem.
If the lightbulbs aren’t burned out, the next thing to try is resetting the power. To do this, unplug your fridge for a few minutes, then plug it back in. This will sometimes reset the fridge and get it working properly again.
Kitchenaid refrigerator lights and water not working
If your Kitchenaid refrigerator lights and water suddenly stop working, there are a few things you can check before calling a repairman.
First, make sure the power cord is plugged into an outlet and that the fridge is turned on.
Next, check the circuit breaker or fuse box to see if the power to the fridge has been interrupted.
If neither of these is the problem, it’s possible that the water line to the fridge has been shut off. Check under the sink or behind the fridge for a shut-off valve.
KitchenAid Refrigerator Freezer Light Not Working
The KitchenAid refrigerator freezer light not working problem can be easily fixed. Most likely, the light socket is loose and just needs to be tightened. Also, check to see if the light switch is turned on. If neither of these are the problem, then the light bulb may need to be replaced.
To fix a loose light socket:
-Unscrew the light socket from the refrigerator wall.
-Tighten the screws on the socket.
-Screw the light bulb back into the socket.
-Turn on the light switch.
To replace a burned out light bulb:
-Remove the old light bulb by unscrewing it from the socket.
-Screw in a new light bulb.
-Turn on the light switch.
If the light socket and switch are both working, but the freezer light still won’t turn on, then there may be a problem with the wiring. If this is the case, it’s best to call an electrician or appliance repair technician.
Related:
- KitchenAid Refrigerator Ice Maker Not Working? Here’s the Fix!
- 10 Reasons KitchenAid Refrigerator Not Cooling? Here’s the Fix
Conclusion
If your KitchenAid refrigerator lights are not working, there are a few things you can try to fix the problem. First, check to make sure that the light bulbs are screwed in tight and that the power is turned on. If the bulbs are loose or the power is off, simply tighten the bulbs and turn on the power. If this does not fix the problem, you may need to replace the light bulbs. Finally, if the refrigerator is still not working properly, you may need to call a repairman. Thanks for reading and good luck!
Source: https://gardencourte.com
Categories: Kitchens