Have you ever thought about replacing your cabinet or vanity hinges, but you can’t find the style you want anywhere? Nobody has the hinge that fits your crazy mortised slot in your cabinet doors. Or the hinge just barely doesn’t work with the frames of your cabinets. And you feel like you’ve looked everywhere at this point.
- All About Kitchen Islands
- How To Keep Your Commercial Kitchen Clean
- Replacing your old kitchen cabinet doors and drawers with bespoke new fronts – a complete guide
- A Restaurant Ended Its Relationship With World Central Kitchen Over Its Dealings With ICE. It’s Complicated.
- How To Reface Kitchen Cabinets : Affordable Cabinet Update
Well, take a breath. We are here to help.
You are watching: Replacing Outdated Demountable Cabinet Hinges?
About Demountable Cabinet Hinges
Chances are, you have what’s called a demountable style cabinet hinge. You can tell the difference between single or double demountable hinges and other cabinet hinges by a slot on the frame and the door. With these types of hinges, you can easily remove the door and install. Meanwhile, traditional hinges that attach with wood screws create much more difficulty.
For years, production style cabinets were manufactured across the U.S. with very limited choices in finishes. Fortunately, we have a solution to help brighten up and replace worn and dated single and double demountable cabinet hinges and finishes. Amerock has been a pioneer in the cabinet hinge market for many, many years and produce these “older” style hinges in trendy, newer finishes. This helps someone like you achieve a modern look without breaking the bank.
The Ultimate Upgrade
Read more : The Best Primer for Cabinets
You can now easily upgrade from your dated, antique brass to a lighter satin nickel or a darker oil rubbed bronze finish. We carry these demountable hinges in Oil Rubbed Bronze, Satin Nickel in both 1/2” & 1/4” overlays, and also for 3/8″ lipped doors.
Demountable hinges have been around for well over 50 years, so chances are you have seen these in homes and not even known it. Concealed European cabinet hinges (also known as hidden hinges) have taken over the market. This leaves the demountable style of hinges with very little use in the new production cabinet industry.
Obsolete Functions
The majority of sales of these demountable type hinges today are for the replacement/retrofit market. This does exclude some of the more unique applications, which no longer exist in the demountable hinge world.
Obsolete functions include:
- 30 degree reverse bevel. This means your door is mitered at a 30 degree bevel to allow fingers to fit and open the door without a knob or pull.
- Overlays greater than 5/8”. Typical aftermarket current finishes come in 1/4” & 1/2” overlay only. For reference, your overlay is the distance the cabinet door overlays the face frame of the actual cabinet.
You can identify a demountable hinge with its distinctive Phillips head screw. This screw fastens the hinge to the door through a slot mortised into the edge. The screw that fastens to the frame can vary from one single screw to two screws, which allows the hinge to be adjusted up and down if desired (single demountable version only).
Removing Hinges
Be careful after loosening the screws to remove the door; the door will slide out of the slot very quickly. When removing the old hinge, use a Phillips screw driver or screw gun to unfasten the door.
Read more : Our Experience at The Lost Kitchen
PRO-TIP: This is a great time to clean the doors of any dirt and grime that has accumulated over the years.
Remove the hinge from the face frame and prepare the frame to receive new screws from the new hinges. Measure 3/4” above the old single screw hole and mark a line, as well as 3/4” below. Pre-drill with a 3/32” drill bit to prevent splitting or breaking the head off the screw when securing the new hinge.
Center the holes and use a Phillips screwdriver or screw gun on low torque setting. Fasten the screws securing the hinge to the frame. Slide the door back onto the slot of the new hinge and secure the door using a Phillips screwdriver.
PRO-TIP: Before securing the hinge to the door, make sure the flap that slides into the slot is completely in the slot so the door butts up tight against the barrel of the hinge.
And with that, you’re done! You now have a fully functioning, new-looking hinge on your cabinet, thanks to The Hardware Hut’s demountable cabinet hinges.
This is a project that can be achieved in a very reasonable amount of time and will make your kitchen look fresh and modern. Looking for help with replacing a European hinge? Read our European Hinge Replacement Guide.
Need Additional Help Finding a Replacement Hinge? Let Us Try
Source: https://gardencourte.com
Categories: Kitchens